Received-SPF: pass (google.com: domain of linux-kernel+bounces-113155-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org,
	stable@vger.kernel.org
Cc: =?UTF-8?q?Michal=20Vok=C3=A1=C4=8D?= <michal.vokac@ysoft.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Shawn Guo <shawnguo@kernel.org>,
	Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.8 264/715] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address
Date: Sun, 24 Mar 2024 18:27:23 -0400
Message-ID: <20240324223455.1342824-265-sashal@kernel.org>
In-Reply-To: <20240324223455.1342824-1-sashal@kernel.org>
References: <20240324223455.1342824-1-sashal@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Michal Vokáč <michal.vokac@ysoft.com>

[ Upstream commit 023bd910d3ab735459f84b22bb99fb9e00bd9d76 ]

This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.

Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index 3be38a3c4bb11..d2b3e09eb7df8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -127,7 +127,7 @@ phy_port3: phy@2 {
 
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {
-- 
2.43.0