Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 98B0F6014C
Subject: Re: [PATCH V5] clk: qcom: Add spmi_pmic clock divider support
To:     sboyd@codeaurora.org
Cc:     mturquette@baylibre.com, robh+dt@kernel.org, mark.rutland@arm.com,
        andy.gross@linaro.org, david.brown@linaro.org,
        linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        linux-soc@vger.kernel.org
References: <1505817286-12445-1-git-send-email-tirupath@codeaurora.org>
From:   Tirupathi Reddy T <tirupath@codeaurora.org>
Message-ID: <9d5af4da-4c6e-74c8-cf0e-4a480e817707@codeaurora.org>
Date:   Fri, 13 Oct 2017 09:46:17 +0530
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101
 Thunderbird/52.3.0
MIME-Version: 1.0
In-Reply-To: <1505817286-12445-1-git-send-email-tirupath@codeaurora.org>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Transfer-Encoding: 8bit
Content-Language: en-US
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Stephen,

Could you please pick the patch ?  All the comments given on older patch 
sets were addressed and the patch is Acked-by Rob Herring.

Thanks
Tirupathi

On 9/19/2017 4:04 PM, Tirupathi Reddy wrote:
> Clkdiv module provides a clock output on the PMIC with CXO as
> the source. This clock can be routed through PMIC GPIOs. Add
> a device driver to configure this clkdiv module.
>
> Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
> ---
>   .../bindings/clock/clk-spmi-pmic-div.txt           |  56 ++++
>   drivers/clk/qcom/Kconfig                           |   9 +
>   drivers/clk/qcom/Makefile                          |   1 +
>   drivers/clk/qcom/clk-spmi-pmic-div.c               | 343 +++++++++++++++++++++
>   4 files changed, 409 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
>   create mode 100644 drivers/clk/qcom/clk-spmi-pmic-div.c
>
> diff --git a/Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt b/Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
> new file mode 100644
> index 0000000..e37a136
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/clk-spmi-pmic-div.txt
> @@ -0,0 +1,56 @@
> +Qualcomm Technologies, Inc. SPMI PMIC clock divider (clkdiv)
> +
> +clkdiv configures the clock frequency of a set of outputs on the PMIC.
> +These clocks are typically wired through alternate functions on
> +gpio pins.
> +
> +=======================
> +Properties
> +=======================
> +
> +- compatible
> +	Usage:      required
> +	Value type: <string>
> +	Definition: must be one of:
> +		    "qcom,spmi-clkdiv"
> +		    "qcom,pm8998-clkdiv"
> +
> +- reg
> +	Usage:      required
> +	Value type: <prop-encoded-array>
> +	Definition: Addresses and sizes for the memory of this CLKDIV
> +		    peripheral.
> +
> +- clocks:
> +	Usage: required
> +	Value type: <prop-encoded-array>
> +	Definition: reference to the xo clock.
> +
> +- clock-names:
> +	Usage: required
> +	Value type: <stringlist>
> +	Definition: must be "xo".
> +
> +- clock-cells:
> +	Usage: required
> +	Value type: <u32>
> +	Definition: shall contain 1.
> +
> +=======
> +Example
> +=======
> +
> +pm8998_clk_divs: qcom,clock@5b00 {
> +	compatible = "qcom,pm8998-clkdiv";
> +	reg = <0x5b00>;
> +	#clock-cells = <1>;
> +	clocks = <&xo_board>;
> +	clock-names = "xo";
> +
> +	assigned-clocks = <&pm8998_clk_divs 1>,
> +			  <&pm8998_clk_divs 2>,
> +			  <&pm8998_clk_divs 3>;
> +	assigned-clock-rates = <9600000>,
> +			       <9600000>,
> +			       <9600000>;
> +};
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 9f6c278..dd5b18e 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -196,3 +196,12 @@ config MSM_MMCC_8996
>   	  Support for the multimedia clock controller on msm8996 devices.
>   	  Say Y if you want to support multimedia devices such as display,
>   	  graphics, video encode/decode, camera, etc.
> +
> +config SPMI_PMIC_CLKDIV
> +	tristate "spmi pmic clkdiv driver"
> +	depends on (COMMON_CLK_QCOM && SPMI) || COMPILE_TEST
> +	help
> +	  This driver supports the clkdiv functionality on the Qualcomm
> +	  Technologies, Inc. SPMI PMIC. It configures the frequency of
> +	  clkdiv outputs on the PMIC. These clocks are typically wired
> +	  through alternate functions on gpio pins.
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 3f3aff2..4d4c62b 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -33,3 +33,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
>   obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
>   obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
>   obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
> +obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> diff --git a/drivers/clk/qcom/clk-spmi-pmic-div.c b/drivers/clk/qcom/clk-spmi-pmic-div.c
> new file mode 100644
> index 0000000..af343ad
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-spmi-pmic-div.c
> @@ -0,0 +1,343 @@
> +/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/bitops.h>
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/log2.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +
> +#define REG_DIV_CTL1			0x43
> +#define DIV_CTL1_DIV_FACTOR_MASK	GENMASK(2, 0)
> +
> +#define REG_EN_CTL			0x46
> +#define REG_EN_MASK			BIT(7)
> +
> +#define ENABLE_DELAY_NS(cxo_ns, div)	((2 + 3 * div) * cxo_ns)
> +#define DISABLE_DELAY_NS(cxo_ns, div)	((3 * div) * cxo_ns)
> +
> +#define CLK_SPMI_PMIC_DIV_OFFSET	1
> +
> +#define CLKDIV_XO_DIV_1_0		0
> +#define CLKDIV_XO_DIV_1			1
> +#define CLKDIV_XO_DIV_2			2
> +#define CLKDIV_XO_DIV_4			3
> +#define CLKDIV_XO_DIV_8			4
> +#define CLKDIV_XO_DIV_16		5
> +#define CLKDIV_XO_DIV_32		6
> +#define CLKDIV_XO_DIV_64		7
> +#define CLKDIV_MAX_ALLOWED		8
> +
> +struct clkdiv {
> +	struct regmap		*regmap;
> +	u16			base;
> +	spinlock_t		lock;
> +
> +	/* clock properties */
> +	struct clk_hw		hw;
> +	unsigned int		div_factor;
> +	unsigned int		cxo_period_ns;
> +};
> +
> +static inline struct clkdiv *to_clkdiv(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct clkdiv, hw);
> +}
> +
> +static inline unsigned int div_factor_to_div(unsigned int div_factor)
> +{
> +	if (div_factor == CLKDIV_XO_DIV_1_0)
> +		return 1;
> +
> +	return 1 << (div_factor - CLK_SPMI_PMIC_DIV_OFFSET);
> +}
> +
> +static inline unsigned int div_to_div_factor(unsigned int div)
> +{
> +	return min(ilog2(div) + CLK_SPMI_PMIC_DIV_OFFSET,
> +		   CLKDIV_MAX_ALLOWED - 1);
> +}
> +
> +static bool is_spmi_pmic_clkdiv_enabled(struct clkdiv *clkdiv)
> +{
> +	unsigned int val = 0;
> +
> +	regmap_read(clkdiv->regmap, clkdiv->base + REG_EN_CTL,
> +			 &val);
> +	return (val & REG_EN_MASK) ? true : false;
> +}
> +
> +static int spmi_pmic_clkdiv_set_enable_state(struct clkdiv *clkdiv,
> +			bool enable_state)
> +{
> +	int rc;
> +
> +	rc = regmap_update_bits(clkdiv->regmap, clkdiv->base + REG_EN_CTL,
> +				REG_EN_MASK,
> +				(enable_state == true) ? REG_EN_MASK : 0);
> +	if (rc)
> +		return rc;
> +
> +	if (enable_state == true)
> +		ndelay(ENABLE_DELAY_NS(clkdiv->cxo_period_ns,
> +				div_factor_to_div(clkdiv->div_factor)));
> +	else
> +		ndelay(DISABLE_DELAY_NS(clkdiv->cxo_period_ns,
> +				div_factor_to_div(clkdiv->div_factor)));
> +
> +	return rc;
> +}
> +
> +static int spmi_pmic_clkdiv_config_freq_div(struct clkdiv *clkdiv,
> +			unsigned int div)
> +{
> +	unsigned int div_factor;
> +	unsigned long flags;
> +	bool enabled;
> +	int rc;
> +
> +	div_factor = div_to_div_factor(div);
> +
> +	spin_lock_irqsave(&clkdiv->lock, flags);
> +
> +	enabled = is_spmi_pmic_clkdiv_enabled(clkdiv);
> +	if (enabled) {
> +		rc = spmi_pmic_clkdiv_set_enable_state(clkdiv, false);
> +		if (rc)
> +			goto fail;
> +	}
> +
> +	rc = regmap_update_bits(clkdiv->regmap,
> +				clkdiv->base + REG_DIV_CTL1,
> +				DIV_CTL1_DIV_FACTOR_MASK, div_factor);
> +	if (rc)
> +		goto fail;
> +
> +	clkdiv->div_factor = div_factor;
> +
> +	if (enabled)
> +		rc = spmi_pmic_clkdiv_set_enable_state(clkdiv, true);
> +
> +fail:
> +	spin_unlock_irqrestore(&clkdiv->lock, flags);
> +	return rc;
> +}
> +
> +static int clk_spmi_pmic_div_enable(struct clk_hw *hw)
> +{
> +	struct clkdiv *clkdiv = to_clkdiv(hw);
> +	unsigned long flags;
> +	int rc;
> +
> +	spin_lock_irqsave(&clkdiv->lock, flags);
> +	rc = spmi_pmic_clkdiv_set_enable_state(clkdiv, true);
> +	spin_unlock_irqrestore(&clkdiv->lock, flags);
> +
> +	return rc;
> +}
> +
> +static void clk_spmi_pmic_div_disable(struct clk_hw *hw)
> +{
> +	struct clkdiv *clkdiv = to_clkdiv(hw);
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&clkdiv->lock, flags);
> +	spmi_pmic_clkdiv_set_enable_state(clkdiv, false);
> +	spin_unlock_irqrestore(&clkdiv->lock, flags);
> +}
> +
> +static long clk_spmi_pmic_div_round_rate(struct clk_hw *hw, unsigned long rate,
> +			unsigned long *parent_rate)
> +{
> +	unsigned long new_rate;
> +	unsigned int div, div_factor;
> +
> +	div = DIV_ROUND_UP(*parent_rate, rate);
> +	div_factor = div_to_div_factor(div);
> +	new_rate = *parent_rate / div_factor_to_div(div_factor);
> +
> +	return new_rate;
> +}
> +
> +static unsigned long clk_spmi_pmic_div_recalc_rate(struct clk_hw *hw,
> +			unsigned long parent_rate)
> +{
> +	struct clkdiv *clkdiv = to_clkdiv(hw);
> +	unsigned long rate;
> +
> +	rate = parent_rate / div_factor_to_div(clkdiv->div_factor);
> +
> +	return rate;
> +}
> +
> +static int clk_spmi_pmic_div_set_rate(struct clk_hw *hw, unsigned long rate,
> +			unsigned long parent_rate)
> +{
> +	struct clkdiv *clkdiv = to_clkdiv(hw);
> +
> +	return spmi_pmic_clkdiv_config_freq_div(clkdiv, parent_rate / rate);
> +}
> +
> +static const struct clk_ops clk_spmi_pmic_div_ops = {
> +	.enable = clk_spmi_pmic_div_enable,
> +	.disable = clk_spmi_pmic_div_disable,
> +	.set_rate = clk_spmi_pmic_div_set_rate,
> +	.recalc_rate = clk_spmi_pmic_div_recalc_rate,
> +	.round_rate = clk_spmi_pmic_div_round_rate,
> +};
> +
> +struct spmi_pmic_div_clk_cc {
> +	struct clk_hw	**div_clks;
> +	int		nclks;
> +};
> +
> +#define SPMI_PMIC_CLKDIV_MIN_INDEX	1
> +
> +static struct clk_hw *spmi_pmic_div_clk_hw_get(struct of_phandle_args *clkspec,
> +				      void *data)
> +{
> +	struct spmi_pmic_div_clk_cc *clk_cc = data;
> +	unsigned int idx = (clkspec->args[0] - SPMI_PMIC_CLKDIV_MIN_INDEX);
> +
> +	if (idx < 0 || idx >= clk_cc->nclks) {
> +		pr_err("%s: index value %u is invalid; allowed range: [%d, %d]\n",
> +		       __func__, clkspec->args[0], SPMI_PMIC_CLKDIV_MIN_INDEX,
> +		       clk_cc->nclks);
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	return clk_cc->div_clks[idx];
> +}
> +
> +#define SPMI_PMIC_DIV_CLK_SIZE		0x100
> +
> +static const struct of_device_id spmi_pmic_clkdiv_match_table[] = {
> +	{
> +		.compatible = "qcom,spmi-clkdiv",
> +		.data =  (void *)(uintptr_t)1,		/* Generic */
> +	},
> +	{
> +		.compatible = "qcom,pm8998-clkdiv",
> +		.data =  (void *)(uintptr_t)3,		/* 3 div_clks */
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, spmi_pmic_clkdiv_match_table);
> +
> +static int spmi_pmic_clkdiv_probe(struct platform_device *pdev)
> +{
> +	struct spmi_pmic_div_clk_cc *clk_cc;
> +	struct clk_init_data init = {};
> +	struct clkdiv *clkdiv;
> +	struct clk *cxo;
> +	struct regmap *regmap;
> +	struct device *dev = &pdev->dev;
> +	const char *parent_name;
> +	int nclks, i, rc, cxo_hz;
> +	u32 start;
> +
> +	rc = of_property_read_u32(dev->of_node, "reg", &start);
> +	if (rc < 0) {
> +		dev_err(dev, "reg property reading failed\n");
> +		return rc;
> +	}
> +
> +	regmap = dev_get_regmap(dev->parent, NULL);
> +	if (!regmap) {
> +		dev_err(dev, "Couldn't get parent's regmap\n");
> +		return -EINVAL;
> +	}
> +
> +	nclks = (uintptr_t)of_match_node(spmi_pmic_clkdiv_match_table,
> +					 dev->of_node)->data;
> +
> +	clkdiv = devm_kcalloc(dev, nclks, sizeof(*clkdiv), GFP_KERNEL);
> +	if (!clkdiv)
> +		return -ENOMEM;
> +
> +	clk_cc = devm_kzalloc(&pdev->dev, sizeof(*clk_cc), GFP_KERNEL);
> +	if (!clk_cc)
> +		return -ENOMEM;
> +
> +	clk_cc->div_clks = devm_kcalloc(&pdev->dev, nclks,
> +					sizeof(*clk_cc->div_clks), GFP_KERNEL);
> +	if (!clk_cc->div_clks)
> +		return -ENOMEM;
> +
> +	cxo = clk_get(dev, "xo");
> +	if (IS_ERR(cxo)) {
> +		rc = PTR_ERR(cxo);
> +		if (rc != -EPROBE_DEFER)
> +			dev_err(dev, "failed to get xo clock");
> +		return rc;
> +	}
> +	cxo_hz = clk_get_rate(cxo);
> +	clk_put(cxo);
> +
> +	parent_name = of_clk_get_parent_name(dev->of_node, 0);
> +	if (!parent_name) {
> +		dev_err(dev, "missing parent clock\n");
> +		return -ENODEV;
> +	}
> +
> +	init.parent_names = &parent_name;
> +	init.num_parents = parent_name ? 1 : 0;
> +	init.ops = &clk_spmi_pmic_div_ops;
> +	init.flags = 0;
> +
> +	for (i = 0; i < nclks; i++) {
> +		spin_lock_init(&clkdiv[i].lock);
> +		clkdiv[i].base = start + i * SPMI_PMIC_DIV_CLK_SIZE;
> +		clkdiv[i].regmap = regmap;
> +		clkdiv[i].cxo_period_ns = NSEC_PER_SEC / cxo_hz;
> +		init.name = kasprintf(GFP_KERNEL, "div_clk%d", i + 1);
> +		clkdiv[i].hw.init = &init;
> +		rc = devm_clk_hw_register(dev, &clkdiv[i].hw);
> +		kfree(init.name); /* clock framework made a copy of the name */
> +		if (rc)
> +			return rc;
> +
> +		clk_cc->div_clks[i] = &clkdiv[i].hw;
> +	}
> +
> +	clk_cc->nclks = nclks;
> +	rc = of_clk_add_hw_provider(pdev->dev.of_node, spmi_pmic_div_clk_hw_get,
> +				    clk_cc);
> +	return rc;
> +}
> +
> +static int spmi_pmic_clkdiv_remove(struct platform_device *pdev)
> +{
> +	of_clk_del_provider(pdev->dev.of_node);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver spmi_pmic_clkdiv_driver = {
> +	.driver		= {
> +		.name	= "qcom,spmi-pmic-clkdiv",
> +		.of_match_table = spmi_pmic_clkdiv_match_table,
> +	},
> +	.probe		= spmi_pmic_clkdiv_probe,
> +	.remove		= spmi_pmic_clkdiv_remove,
> +};
> +module_platform_driver(spmi_pmic_clkdiv_driver);
> +
> +MODULE_DESCRIPTION("QCOM SPMI PMIC clkdiv driver");
> +MODULE_LICENSE("GPL v2");


From 1579194332403272794@xxx Thu Sep 21 23:37:55 +0000 2017
X-GM-THRID: 1578964669043180372
X-Gmail-Labels: Inbox,Category Forums