Received-SPF: pass (google.com: domain of linux-kernel+bounces-117936-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
Date: Mon, 25 Mar 2024 20:31:55 +0000
From: Jonathan Cameron <jic23@kernel.org>
To: Lothar Rubusch <l.rubusch@gmail.com>
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, robh+dt@kernel.org,
 krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
 linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org, eraretuya@gmail.com
Subject: Re: [PATCH v4 1/7] iio: accel: adxl345: Make data_range obsolete
Message-ID: <20240325203155.23ddfe3d@jic23-huawei>
In-Reply-To: <20240325153356.46112-2-l.rubusch@gmail.com>
References: <20240325153356.46112-1-l.rubusch@gmail.com>
	<20240325153356.46112-2-l.rubusch@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit

On Mon, 25 Mar 2024 15:33:50 +0000
Lothar Rubusch <l.rubusch@gmail.com> wrote:

> Replace write() data_format by regmap_update_bits(), because
> bus specific pre-configuration may have happened before on
> the same register. Changes then need to be masked.
> 
> Remove the data_range field from the struct adxl345_data,
> because it is not used anymore.
> 
> Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
> ---
>  drivers/iio/accel/adxl345_core.c | 9 ++++-----
>  1 file changed, 4 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
> index 8bd30a23e..be6758015 100644
> --- a/drivers/iio/accel/adxl345_core.c
> +++ b/drivers/iio/accel/adxl345_core.c
> @@ -42,13 +42,13 @@
>  #define ADXL345_DATA_FORMAT_4G		1
>  #define ADXL345_DATA_FORMAT_8G		2
>  #define ADXL345_DATA_FORMAT_16G		3
> +#define ADXL345_DATA_FORMAT_MSK		~((u8) BIT(6)) /* ignore spi-3wire */

I'm not keen on seeing masking of a bit we don't yet
handle done by value.  Can we instead build this up by what we 'want' to
write rather than don't. Will need a few more defines perhaps to cover
the masks of SELF_TEST, INT_INVERT, FULL_RES, Justify and Range.

>  
>  #define ADXL345_DEVID			0xE5
>  
>  struct adxl345_data {
>  	const struct adxl345_chip_info *info;
>  	struct regmap *regmap;
> -	u8 data_range;
>  };
>  
>  #define ADXL345_CHANNEL(index, axis) {					\
> @@ -219,14 +219,13 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap)
>  	data = iio_priv(indio_dev);
>  	data->regmap = regmap;
>  	/* Enable full-resolution mode */
> -	data->data_range = ADXL345_DATA_FORMAT_FULL_RES;
>  	data->info = device_get_match_data(dev);
>  	if (!data->info)
>  		return -ENODEV;
>  
> -	ret = regmap_write(data->regmap, ADXL345_REG_DATA_FORMAT,
> -			   data->data_range);
> -	if (ret < 0)
> +	ret = regmap_update_bits(regmap, ADXL345_REG_DATA_FORMAT,
> +				 ADXL345_DATA_FORMAT_MSK, ADXL345_DATA_FORMAT_FULL_RES);
> +	if (ret)
>  		return dev_err_probe(dev, ret, "Failed to set data range\n");
>  
>  	indio_dev->name = data->info->name;