Received-SPF: pass (google.com: domain of linux-kernel+bounces-118813-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
From: Kelly Hung <ppighouse@gmail.com>
To: robh+dt@kernel.org
Cc: krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org,
	joel@jms.id.au,
	andrew@codeconstruct.com.au,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org,
	linux-kernel@vger.kernel.org,
	openbmc@lists.ozlabs.org,
	kelly_hung@asus.com,
	Allenyy_Hsu@asus.com,
	Kelly Hung <Kelly_Hung@asus.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v6 2/2] ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
Date: Tue, 26 Mar 2024 18:35:49 +0800
Message-Id: <20240326103549.2413515-3-Kelly_Hung@asus.com>
In-Reply-To: <20240326103549.2413515-1-Kelly_Hung@asus.com>
References: <20240326103549.2413515-1-Kelly_Hung@asus.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Base on aspeed-g6.dtsi and can boot into BMC console.

Signed-off-by: Kelly Hung <Kelly_Hung@asus.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
v5 -> v6:
- Add Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
- Add Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
- Remove the v3's Reviewed-by: Zev Weiss <zweiss@equinix.com>.
V4 -> V5: None
V3 -> V4: None
V2 -> V3:
- fmc lable change to bmc.
- use 64M partition layout.
- rename spi1 label to bios.
- remove bios partition section.
- add Reviewed-by: Zev Weiss <zweiss@equinix.com>
V1 -> V2:
- do schema check and remove all warings.
- remove all unnecessary sections.
---
 arch/arm/boot/dts/aspeed/Makefile             |   1 +
 .../boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts  | 581 ++++++++++++++++++
 2 files changed, 582 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts

diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e31..32c41f3d9 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
 	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-asus-x4tf.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
 	aspeed-bmc-delta-ahe50dc.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
new file mode 100644
index 000000000..64f4ed07c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asus-x4tf.dts
@@ -0,0 +1,581 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2024 ASUS Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ASUS-X4TF";
+	compatible = "asus,x4tf-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+				<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-uid {
+			gpios = <&gpio0 ASPEED_GPIO(P, 1) (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+			default-state = "off";
+		};
+
+		led-status_Y {
+			gpios = <&gpio1 ASPEED_GPIO(B, 1) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-sys_boot_status {
+			gpios = <&gpio1 ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rmii";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+
+	pca9555_4_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_22: gpio@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_4_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 - A3 0*/	"", "STRAP_BMC_BATTERY_GPIO1", "", "",
+		/*A4 - A7 4*/	"", "", "", "",
+		/*B0 - B7 8*/	"", "", "", "", "", "", "", "";
+	};
+
+	pca9555_4_26: gpio@26 {
+		compatible = "nxp,pca9555";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9555_5_24: gpio@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2c-mux@70  {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70 >;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_5: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			pca9555_5_5_20: gpio@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"", "", "", "", "", "", "", "",
+					"", "", "SYS_FAN6", "SYS_FAN5",
+					"SYS_FAN4", "SYS_FAN3",
+					"SYS_FAN2", "SYS_FAN1";
+			};
+
+			pca9555_5_5_21: gpio@21 {
+				compatible = "nxp,pca9555";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			power-monitor@44 {
+				compatible = "ti,ina219";
+				reg = <0x44>;
+				shunt-resistor = <2>;
+			};
+		};
+
+		channel_6: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_7: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9555_6_27: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9555_6_20: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*A0 0*/	"", "", "", "", "", "", "", "",
+		/*B0 8*/	"Drive_NVMe1", "Drive_NVMe2", "", "",
+		/*B4 12*/	"", "", "", "";
+	};
+
+	pca9555_6_21: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		idle-state = <1>;
+
+		channel_9: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			power-monitor@40 {
+				compatible = "ti,ina219";
+				reg = <0x40>;
+				shunt-resistor = <2>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_10: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_11: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_12: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_13: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_14: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_15: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_16: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9546";
+		status = "okay";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		channel_17: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_18: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			power-monitor@41 {
+				compatible = "ti,ina219";
+				reg = <0x41>;
+				shunt-resistor = <5>;
+			};
+		};
+
+		channel_19: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_20: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+	multi-master;
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c08";
+		reg = <0x51>;
+	};
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdc {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs1 {
+	aspeed,lpc-io-reg = <0xca0>;
+	status = "okay";
+};
+
+&kcs2 {
+	aspeed,lpc-io-reg = <0xca8>;
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xca2>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 0*/	"", "", "", "", "", "", "", "",
+	/*B0 8*/	"", "", "", "", "", "", "PS_PWROK", "",
+	/*C0 16*/	"", "", "", "", "", "", "", "",
+	/*D0 24*/	"", "", "", "", "", "", "", "",
+	/*E0 32*/	"", "", "", "", "", "", "", "",
+	/*F0 40*/	"", "", "", "", "", "", "", "",
+	/*G0 48*/	"", "", "", "", "", "", "", "",
+	/*H0 56*/	"", "", "", "", "", "", "", "",
+	/*I0 64*/	"", "", "", "", "", "", "", "",
+	/*J0 72*/	"", "", "", "", "", "", "", "",
+	/*K0 80*/	"", "", "", "", "", "", "", "",
+	/*L0 88*/	"", "", "", "", "", "", "", "",
+	/*M0 96*/	"", "", "", "", "", "", "", "",
+	/*N0 104*/	"", "", "", "",
+	/*N4 108*/	"POST_COMPLETE", "ESR1_GPIO_AST_SPISEL", "", "",
+	/*O0 112*/	"", "", "", "", "", "", "", "",
+	/*P0 120*/	"ID_BUTTON", "ID_OUT", "POWER_BUTTON", "POWER_OUT",
+	/*P4 124*/	"RESET_BUTTON", "RESET_OUT", "", "HEARTBEAT",
+	/*Q0 128*/	"", "", "", "", "", "", "", "",
+	/*R0 136*/	"", "", "", "", "", "", "", "",
+	/*S0 144*/	"", "", "", "", "", "", "", "",
+	/*T0 152*/	"", "", "", "", "", "", "", "",
+	/*U0 160*/	"", "", "", "", "", "", "", "",
+	/*V0 168*/	"", "", "", "", "", "", "", "",
+	/*W0 176*/	"", "", "", "", "", "", "", "",
+	/*X0 184*/	"", "", "", "", "", "", "", "",
+	/*Y0 192*/	"", "", "", "", "", "", "", "",
+	/*Z0 200*/	"", "", "", "", "", "", "", "";
+};
-- 
2.25.1