Received-SPF: pass (google.com: domain of linux-kernel+bounces-120575-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Peter Yin <peteryin.openbmc@gmail.com>
To: patrick@stwcx.xyz,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Joel Stanley <joel@jms.id.au>,
	Andrew Jeffery <andrew@codeconstruct.com.au>,
	linux-watchdog@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-aspeed@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 4/4] drivers: watchdog: ast2500 and ast2600 support bootstatus
Date: Wed, 27 Mar 2024 16:53:30 +0800
Message-Id: <20240327085330.3281697-5-peteryin.openbmc@gmail.com>
In-Reply-To: <20240327085330.3281697-1-peteryin.openbmc@gmail.com>
References: <20240327085330.3281697-1-peteryin.openbmc@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Add WDIOF_EXTERN1 and WDIOF_CARDRESET bootstatus in ast2600

Regarding the AST2600 specification, the WDTn Timeout Status Register
(WDT10) has bit 1 reserved. Bit 1 of the status register indicates
on ast2500 if the boot was from the second boot source.
It does not indicate that the most recent reset was triggered by
the watchdog. The code should just be changed to set WDIOF_CARDRESET
if bit 0 of the status register is set.

Include SCU register to veriy WDIOF_EXTERN1 in ast2600 SCU74 or
ast2500 SCU3C when bit1 is set.

Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
---
 drivers/watchdog/aspeed_wdt.c | 60 +++++++++++++++++++++++++----------
 1 file changed, 44 insertions(+), 16 deletions(-)

diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index b4773a6aaf8c..29e9afdee619 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -11,10 +11,12 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/kstrtox.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/watchdog.h>
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -65,23 +67,32 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
 #define WDT_RELOAD_VALUE	0x04
 #define WDT_RESTART		0x08
 #define WDT_CTRL		0x0C
-#define   WDT_CTRL_BOOT_SECONDARY	BIT(7)
-#define   WDT_CTRL_RESET_MODE_SOC	(0x00 << 5)
-#define   WDT_CTRL_RESET_MODE_FULL_CHIP	(0x01 << 5)
-#define   WDT_CTRL_RESET_MODE_ARM_CPU	(0x10 << 5)
-#define   WDT_CTRL_1MHZ_CLK		BIT(4)
-#define   WDT_CTRL_WDT_EXT		BIT(3)
-#define   WDT_CTRL_WDT_INTR		BIT(2)
-#define   WDT_CTRL_RESET_SYSTEM		BIT(1)
-#define   WDT_CTRL_ENABLE		BIT(0)
+#define WDT_CTRL_BOOT_SECONDARY	BIT(7)
+#define WDT_CTRL_RESET_MODE_SOC	(0x00 << 5)
+#define WDT_CTRL_RESET_MODE_FULL_CHIP	(0x01 << 5)
+#define WDT_CTRL_RESET_MODE_ARM_CPU	(0x10 << 5)
+#define WDT_CTRL_1MHZ_CLK		BIT(4)
+#define WDT_CTRL_WDT_EXT		BIT(3)
+#define WDT_CTRL_WDT_INTR		BIT(2)
+#define WDT_CTRL_RESET_SYSTEM		BIT(1)
+#define WDT_CTRL_ENABLE		BIT(0)
 #define WDT_TIMEOUT_STATUS	0x10
-#define   WDT_TIMEOUT_STATUS_IRQ		BIT(2)
-#define   WDT_TIMEOUT_STATUS_BOOT_SECONDARY	BIT(1)
+#define WDT_TIMEOUT_STATUS_IRQ		BIT(2)
+#define WDT_TIMEOUT_STATUS_BOOT_SECONDARY	BIT(1)
+#define WDT_TIMEOUT_STATUS_EVENT		BIT(0)
 #define WDT_CLEAR_TIMEOUT_STATUS	0x14
-#define   WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION	BIT(0)
+#define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION	BIT(0)
 #define WDT_RESET_MASK1		0x1c
 #define WDT_RESET_MASK2		0x20
 
+/*
+ * Ast2600 SCU74 bit1 is External reset flag
+ * Ast2500 SCU3C bit1 is External reset flag
+ */
+#define EXTERN_RESET_FLAG		BIT(1)
+#define AST2500_SYSTEM_RESET_EVENT	0x3C
+#define AST2600_SYSTEM_RESET_EVENT	0x74
+
 /*
  * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
  * enabled), specifically:
@@ -330,6 +341,11 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
+	struct regmap *scu_base = syscon_regmap_lookup_by_phandle(dev->of_node,
+							     "aspeed,scu");
+	if (IS_ERR(scu_base))
+		return PTR_ERR(scu_base);
+
 	wdt->wdd.info = &aspeed_wdt_info;
 
 	if (wdt->cfg->irq_mask) {
@@ -459,14 +475,26 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 	}
 
 	status = readl(wdt->base + WDT_TIMEOUT_STATUS);
-	if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) {
+	if (status & WDT_TIMEOUT_STATUS_EVENT)
 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
 
-		if (of_device_is_compatible(np, "aspeed,ast2400-wdt") ||
-		    of_device_is_compatible(np, "aspeed,ast2500-wdt"))
-			wdt->wdd.groups = bswitch_groups;
+	if (of_device_is_compatible(np, "aspeed,ast2600-wdt")) {
+		ret = regmap_read(scu_base,
+				  AST2600_SYSTEM_RESET_EVENT,
+				  &status);
+	} else {
+		ret = regmap_read(scu_base,
+				  AST2500_SYSTEM_RESET_EVENT,
+				  &status);
+		wdt->wdd.groups = bswitch_groups;
 	}
 
+	/*
+	 * Reset cause by Extern Reset
+	 */
+	if (status & EXTERN_RESET_FLAG && !ret)
+		wdt->wdd.bootstatus |= WDIOF_EXTERN1;
+
 	dev_set_drvdata(dev, wdt);
 
 	return devm_watchdog_register_device(dev, &wdt->wdd);
-- 
2.25.1