Received-SPF: pass (google.com: domain of linux-kernel+bounces-122055-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Bjorn Helgaas <helgaas@kernel.org>
To: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Victor Shih <victor.shih@genesyslogic.com.tw>,
	Ben Chuang <ben.chuang@genesyslogic.com.tw>
Cc: Kai-Heng Feng <kai.heng.geng@canonical.com>,
	Sven van Ashbrook <svenva@chromium.org>,
	Stanislaw Kardach <skardach@google.com>,
	Brian Norris <briannorris@chromium.org>,
	Jason Lai <jasonlai.genesyslogic@gmail.com>,
	Renius Chen <reniuschengl@gmail.com>,
	linux-pci@vger.kernel.org,
	linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH 0/2] mmc: sdhci-pci-gli: Remove unnecessary device-dependent code
Date: Wed, 27 Mar 2024 16:48:29 -0500
Message-Id: <20240327214831.1544595-1-helgaas@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Bjorn Helgaas <bhelgaas@google.com>

Previously the driver hard-coded the config space locations of the Power
Management and the AER Capabilities and included device-specific #defines
for bits defined by the PCI spec.  This replaces those with the equivalents
from the PCI core.

This also replace hard-coded power state changes (to D3hot and back to D0)
with the pci_set_power_state() interface, which takes care of the required
delays after these transitions.

Bjorn Helgaas (2):
  mmc: sdhci-pci-gli: Use PCI AER definitions, not hard-coded values
  mmc: sdhci-pci-gli: Use pci_set_power_state(), not direct PMCSR writes

 drivers/mmc/host/sdhci-pci-gli.c | 46 +++++++++++++-------------------
 1 file changed, 18 insertions(+), 28 deletions(-)

-- 
2.34.1