Received-SPF: pass (google.com: domain of linux-kernel+bounces-122239-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
Date: Wed, 27 Mar 2024 19:44:08 -0500
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit
Precedence: bulk
MIME-Version: 1.0
From: Rob Herring <robh@kernel.org>
To: =?utf-8?q?Andr=C3=A9_Apitzsch?= <git@apitzsch.eu>
Cc: ~postmarketos/upstreaming@lists.sr.ht, linux-kernel@vger.kernel.org, 
 Kees Cook <keescook@chromium.org>, linux-arm-msm@vger.kernel.org, 
 Lee Jones <lee@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, 
 Pavel Machek <pavel@ucw.cz>, linux-hardening@vger.kernel.org, 
 Conor Dooley <conor+dt@kernel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
 Bjorn Andersson <andersson@kernel.org>, linux-leds@vger.kernel.org, 
 devicetree@vger.kernel.org, "Gustavo A. R. Silva" <gustavoars@kernel.org>
In-Reply-To: <20240327-sy7802-v1-1-db74ab32faaf@apitzsch.eu>
References: <20240327-sy7802-v1-0-db74ab32faaf@apitzsch.eu>
 <20240327-sy7802-v1-1-db74ab32faaf@apitzsch.eu>
Message-Id: <171158664689.823785.11147473547097630411.robh@kernel.org>
Subject: Re: [PATCH 1/3] dt-bindings: leds: Add Silergy SY7802 flash LED


On Wed, 27 Mar 2024 23:51:33 +0100, André Apitzsch wrote:
> Document Silergy SY7802 flash LED driver devicetree bindings.
> 
> Signed-off-by: André Apitzsch <git@apitzsch.eu>
> ---
>  .../devicetree/bindings/leds/silergy,sy7802.yaml   | 96 ++++++++++++++++++++++
>  1 file changed, 96 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/silergy,sy7802.example.dts:23.13-26: Warning (reg_format): /example-0/flash-led-controller@53:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/leds/silergy,sy7802.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240327-sy7802-v1-1-db74ab32faaf@apitzsch.eu

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.