Received-SPF: pass (google.com: domain of linux-kernel+bounces-122306-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
Precedence: bulk
MIME-Version: 1.0
References: <20240326-rb3gen2-dp-connector-v2-0-a9f1bc32ecaf@quicinc.com> <20240326-rb3gen2-dp-connector-v2-2-a9f1bc32ecaf@quicinc.com>
In-Reply-To: <20240326-rb3gen2-dp-connector-v2-2-a9f1bc32ecaf@quicinc.com>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 28 Mar 2024 03:51:54 +0200
Message-ID: <CAA8EJpoe7A94608V1GdQ-oU9UXagHPm0mVBUe4Yxi=HF2pMd7w@mail.gmail.com>
Subject: Re: [PATCH v2 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add DP output
To: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: cros-qcom-dts-watchers@chromium.org, 
	Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, 
	Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, 
	Conor Dooley <conor+dt@kernel.org>, Catalin Marinas <catalin.marinas@arm.com>, 
	Will Deacon <will@kernel.org>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, 
	linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"

On Wed, 27 Mar 2024 at 04:04, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
>
> The RB3Gen2 board comes with a mini DP connector, describe this, enable
> MDSS, DP controller and the PHY that drives this.
>
> Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 40 ++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index 63ebe0774f1d..f90bf3518e98 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -39,6 +39,20 @@ chosen {
>                 stdout-path = "serial0:115200n8";
>         };
>
> +       dp-connector {
> +               compatible = "dp-connector";
> +               label = "DP";
> +               type = "mini";
> +
> +               hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;

Is it the standard hpd gpio? If so, is there any reason for using it
through dp-connector rather than as a native HPD signal?

> +
> +               port {
> +                       dp_connector_in: endpoint {
> +                               remote-endpoint = <&mdss_edp_out>;
> +                       };
> +               };
> +       };
> +
>         reserved-memory {
>                 xbl_mem: xbl@80700000 {
>                         reg = <0x0 0x80700000 0x0 0x100000>;
> @@ -471,6 +485,25 @@ &gcc {
>                            <GCC_WPSS_RSCP_CLK>;
>  };
>
> +&mdss {
> +       status = "okay";
> +};
> +
> +&mdss_edp {
> +       status = "okay";
> +};
> +
> +&mdss_edp_out {
> +       data-lanes = <0 1 2 3>;
> +       link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
> +
> +       remote-endpoint = <&dp_connector_in>;
> +};
> +
> +&mdss_edp_phy {
> +       status = "okay";
> +};
> +
>  &qupv3_id_0 {
>         status = "okay";
>  };
> @@ -511,3 +544,10 @@ &usb_1_qmpphy {
>  &wifi {
>         memory-region = <&wlan_fw_mem>;
>  };
> +
> +/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
> +
> +&edp_hot_plug_det {
> +       function = "gpio";
> +       bias-disable;
> +};
>
> --
> 2.25.1
>


-- 
With best wishes
Dmitry