Received-SPF: pass (google.com: domain of linux-kernel+bounces-122327-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Maximilian Luz <luzmaximilian@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Maximilian Luz <luzmaximilian@gmail.com>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Vinod Koul <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
Date: Thu, 28 Mar 2024 03:21:57 +0100
Message-ID: <20240328022224.336938-1-luzmaximilian@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as

    Name (_CRS, ResourceTemplate ()
    {
        Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
        {
            0x000000AA,
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x000000A7,     // hs_phy_irq: &intc GIC_SPI 136
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x00000228,     // ss_phy_irq: &pdc 40
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020A,     // dm_hs_phy_irq: &pdc 10
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020B,     // dp_hs_phy_irq: &pdc 11
        }
    })

Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).

Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.

Fixes: b080f53a8f44 ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 32afc78d5b769..053f7861c3cec 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -2701,7 +2701,7 @@ usb_sec: usb@a8f8800 {
 			resets = <&gcc GCC_USB30_SEC_BCR>;
 			power-domains = <&gcc USB30_SEC_GDSC>;
 			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					      <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 40 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
-- 
2.44.0