Received-SPF: pass (google.com: domain of linux-kernel+bounces-122491-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:40f1:3f00::1 as permitted sender) client-ip=2604:1380:40f1:3f00::1;
Precedence: bulk
MIME-Version: 1.0
References: <20240326-rb3gen2-dp-connector-v2-0-a9f1bc32ecaf@quicinc.com>
 <20240326-rb3gen2-dp-connector-v2-2-a9f1bc32ecaf@quicinc.com>
 <CAA8EJpoe7A94608V1GdQ-oU9UXagHPm0mVBUe4Yxi=HF2pMd7w@mail.gmail.com> <zsjzysb7h3wi3cfpaozl46l4jnsd7e3lxttzm5vptozjx24cqo@vqmyhl65q7ay>
In-Reply-To: <zsjzysb7h3wi3cfpaozl46l4jnsd7e3lxttzm5vptozjx24cqo@vqmyhl65q7ay>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 28 Mar 2024 09:17:45 +0200
Message-ID: <CAA8EJppCuoOnaB03GsjXGYSs5Q9iQ2uXHWQqfkPA5jKzdHc8NQ@mail.gmail.com>
Subject: Re: [PATCH v2 2/6] arm64: dts: qcom: qcs6490-rb3gen2: Add DP output
To: Bjorn Andersson <andersson@kernel.org>
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>, cros-qcom-dts-watchers@chromium.org, 
	Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh@kernel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, 
	Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, linux-arm-msm@vger.kernel.org, 
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, 
	linux-arm-kernel@lists.infradead.org
Content-Type: text/plain; charset="UTF-8"

On Thu, 28 Mar 2024 at 05:07, Bjorn Andersson <andersson@kernel.org> wrote:
>
> On Thu, Mar 28, 2024 at 03:51:54AM +0200, Dmitry Baryshkov wrote:
> > On Wed, 27 Mar 2024 at 04:04, Bjorn Andersson <quic_bjorande@quicinc.com> wrote:
> > >
> > > The RB3Gen2 board comes with a mini DP connector, describe this, enable
> > > MDSS, DP controller and the PHY that drives this.
> > >
> > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
> > > ---
> > >  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 40 ++++++++++++++++++++++++++++
> > >  1 file changed, 40 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > > index 63ebe0774f1d..f90bf3518e98 100644
> > > --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> > > @@ -39,6 +39,20 @@ chosen {
> > >                 stdout-path = "serial0:115200n8";
> > >         };
> > >
> > > +       dp-connector {
> > > +               compatible = "dp-connector";
> > > +               label = "DP";
> > > +               type = "mini";
> > > +
> > > +               hpd-gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
> >
> > Is it the standard hpd gpio? If so, is there any reason for using it
> > through dp-connector rather than as a native HPD signal?
> >
>
> I added it because you asked for it. That said, I do like having it
> clearly defined in the devicetree.

I asked for the dp-connector device, not for the HPD function change.


-- 
With best wishes
Dmitry