Received-SPF: pass (google.com: domain of linux-kernel+bounces-122713-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
Message-ID: <361a9874-2a41-4b8e-9910-67dff9daad14@foss.st.com>
Date: Thu, 28 Mar 2024 10:44:40 +0100
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v1] ARM: dts: stm32: Update button on stm32mp135f-dk
Content-Language: en-US
To: <robh+dt@kernel.org>,
        Krzysztof Kozlowski
	<krzysztof.kozlowski+dt@linaro.org>,
        <alexandre.torgue@foss.st.com>
CC: <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>
References: <20240328080105.3910099-1-patrice.chotard@foss.st.com>
From: Patrice CHOTARD <patrice.chotard@foss.st.com>
In-Reply-To: <20240328080105.3910099-1-patrice.chotard@foss.st.com>
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit

This patch must be dropped, i made a mistake.

Sorry
Patrice

On 3/28/24 09:01, patrice.chotard@foss.st.com wrote:
> From: Patrice Chotard <patrice.chotard@foss.st.com>
> 
> On schematics, 2 buttons are available on stm32mp135-dk board:
>   _ button "user1" connected to GPIOA14
>   _ button "user2" connected to GPIOA13
> 
> Reflect that on device tree.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
>  arch/arm/boot/dts/st/stm32mp135f-dk.dts | 10 ++++++++--
>  1 file changed, 8 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> index 52171214a308..f7e03bc7eccb 100644
> --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
> @@ -48,9 +48,15 @@ optee@dd000000 {
>  	gpio-keys {
>  		compatible = "gpio-keys";
>  
> -		button-user {
> -			label = "User-PA13";
> +		button-user-1 {
> +			label = "User-1";
>  			linux,code = <BTN_1>;
> +			gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
> +		};
> +
> +		button-user-2 {
> +			label = "User-2";
> +			linux,code = <BTN_2>;
>  			gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
>  		};
>  	};