Received-SPF: pass (google.com: domain of linux-kernel+bounces-124688-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
References: <20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-0-04f55de44604@linaro.org>
 <20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-2-04f55de44604@linaro.org>
User-agent: mu4e 1.10.8; emacs 29.2
From: Jerome Brunet <jbrunet@baylibre.com>
To: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski
 <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>,
 Kevin Hilman <khilman@baylibre.com>, Jerome Brunet <jbrunet@baylibre.com>,
 Michael Turquette <mturquette@baylibre.com>, Stephen Boyd
 <sboyd@kernel.org>, Martin Blumenstingl
 <martin.blumenstingl@googlemail.com>, Maarten Lankhorst
 <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>,
 Thomas Zimmermann <tzimmermann@suse.de>, David Airlie <airlied@gmail.com>,
 Daniel Vetter <daniel@ffwll.ch>, Nicolas Belin <nbelin@baylibre.com>,
 Jagan Teki <jagan@amarulasolutions.com>, devicetree@vger.kernel.org,
 linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
 linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
 dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v11 2/7] clk: meson: add vclk driver
Date: Fri, 29 Mar 2024 13:33:29 +0100
In-reply-to: <20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-2-04f55de44604@linaro.org>
Message-ID: <1jzfuh8bd7.fsf@starbuckisacylon.baylibre.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain


On Mon 25 Mar 2024 at 12:09, Neil Armstrong <neil.armstrong@linaro.org> wrote:

> The VCLK and VCLK_DIV clocks have supplementary bits.
>
> The VCLK gate has a "SOFT RESET" bit to toggle after the whole
> VCLK sub-tree rate has been set, this is implemented in
> the gate enable callback.
>
> The VCLK_DIV clocks as enable and reset bits used to disable
> and reset the divider, associated with CLK_SET_RATE_GATE it ensures
> the rate is set while the divider is disabled and in reset mode.
>
> The VCLK_DIV enable bit isn't implemented as a gate since it's part
> of the divider logic and vendor does this exact sequence to ensure
> the divider is correctly set.

checkpatch reports a few easy CHECKs and one WARNING.
Could you please fix these ?

Other than that, It looks OK.

>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  drivers/clk/meson/Kconfig  |   4 ++
>  drivers/clk/meson/Makefile |   1 +
>  drivers/clk/meson/vclk.c   | 141 +++++++++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/vclk.h   |  51 ++++++++++++++++
>  4 files changed, 197 insertions(+)
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 29ffd14d267b..8a9823789fa3 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
>  	tristate
>  	select COMMON_CLK_MESON_REGMAP
>  
> +config COMMON_CLK_MESON_VCLK
> +	tristate
> +	select COMMON_CLK_MESON_REGMAP
> +
>  config COMMON_CLK_MESON_CLKC_UTILS
>  	tristate
>  
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 9ee4b954c896..9ba43fe7a07a 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
>  obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
>  obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
>  obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
>  
>  # Amlogic Clock controllers
>  
> diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
> new file mode 100644
> index 000000000000..3ea813a0a995
> --- /dev/null
> +++ b/drivers/clk/meson/vclk.c
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
> + */
> +
> +#include <linux/module.h>
> +#include "vclk.h"
> +
> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */
> +
> +static inline struct meson_vclk_gate_data *
> +clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
> +{
> +	return (struct meson_vclk_gate_data *)clk->data;
> +}
> +
> +static int meson_vclk_gate_enable(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
> +
> +	meson_parm_write(clk->map, &vclk->enable, 1);
> +
> +	/* Do a reset pulse */
> +	meson_parm_write(clk->map, &vclk->reset, 1);
> +	meson_parm_write(clk->map, &vclk->reset, 0);
> +
> +	return 0;
> +}
> +
> +static void meson_vclk_gate_disable(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
> +
> +	meson_parm_write(clk->map, &vclk->enable, 0);
> +}
> +
> +static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
> +
> +	return meson_parm_read(clk->map, &vclk->enable);
> +}
> +
> +const struct clk_ops meson_vclk_gate_ops = {
> +	.enable = meson_vclk_gate_enable,
> +	.disable = meson_vclk_gate_disable,
> +	.is_enabled = meson_vclk_gate_is_enabled,
> +};
> +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
> +
> +/* The VCLK Divider has supplementary reset & enable bits */
> +
> +static inline struct meson_vclk_div_data *
> +clk_get_meson_vclk_div_data(struct clk_regmap *clk)
> +{
> +	return (struct meson_vclk_div_data *)clk->data;
> +}
> +
> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
> +						     unsigned long prate)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> +	return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
> +				   vclk->table, vclk->flags, vclk->div.width);
> +}
> +
> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
> +					      struct clk_rate_request *req)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> +	return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
> +				      vclk->flags);
> +}
> +
> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
> +					unsigned long parent_rate)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +	int ret;
> +
> +	ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
> +			      vclk->flags);
> +	if (ret < 0)
> +		return ret;
> +
> +	meson_parm_write(clk->map, &vclk->div, ret);
> +
> +	return 0;
> +};
> +
> +static int meson_vclk_div_enable(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> +	/* Unreset the divider when ungating */
> +	meson_parm_write(clk->map, &vclk->reset, 0);
> +	meson_parm_write(clk->map, &vclk->enable, 1);
> +
> +	return 0;
> +}
> +
> +static void meson_vclk_div_disable(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> +	/* Reset the divider when gating */
> +	meson_parm_write(clk->map, &vclk->enable, 0);
> +	meson_parm_write(clk->map, &vclk->reset, 1);
> +}
> +
> +static int meson_vclk_div_is_enabled(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clk = to_clk_regmap(hw);
> +	struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> +	return meson_parm_read(clk->map, &vclk->enable);
> +}
> +
> +const struct clk_ops meson_vclk_div_ops = {
> +	.recalc_rate = meson_vclk_div_recalc_rate,
> +	.determine_rate = meson_vclk_div_determine_rate,
> +	.set_rate = meson_vclk_div_set_rate,
> +	.enable = meson_vclk_div_enable,
> +	.disable = meson_vclk_div_disable,
> +	.is_enabled = meson_vclk_div_is_enabled,
> +};
> +EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
> +
> +MODULE_DESCRIPTION("Amlogic vclk clock driver");
> +MODULE_AUTHOR("Neil Armstrong <neil.armstrong@linaro.org>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
> new file mode 100644
> index 000000000000..20b0b181db09
> --- /dev/null
> +++ b/drivers/clk/meson/vclk.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2024 Neil Armstrong <neil.armstrong@linaro.org>
> + */
> +
> +#ifndef __VCLK_H
> +#define __VCLK_H
> +
> +#include "clk-regmap.h"
> +#include "parm.h"
> +
> +/**
> + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
> + *
> + * @enable:	vclk enable field
> + * @reset:	vclk reset field
> + * @flags:	hardware-specific flags
> + *
> + * Flags:
> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
> + */
> +struct meson_vclk_gate_data {
> +	struct parm enable;
> +	struct parm reset;
> +	u8 flags;
> +};
> +
> +extern const struct clk_ops meson_vclk_gate_ops;
> +
> +/**
> + * struct meson_vclk_div_data - vclk_div regmap back specific data
> + *
> + * @div:	divider field
> + * @enable:	vclk divider enable field
> + * @reset:	vclk divider reset field
> + * @table:	array of value/divider pairs, last entry should have div = 0
> + *
> + * Flags:
> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
> + */
> +struct meson_vclk_div_data {
> +	struct parm div;
> +	struct parm enable;
> +	struct parm reset;
> +	const struct clk_div_table *table;
> +	u8 flags;
> +};
> +
> +extern const struct clk_ops meson_vclk_div_ops;
> +
> +#endif /* __VCLK_H */


-- 
Jerome