Received-SPF: pass (google.com: domain of linux-kernel+bounces-127552-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Date: Tue, 2 Apr 2024 16:31:10 +0800
From: Shawn Guo <shawnguo2@yeah.net>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, robh+dt@kernel.org,
	krzysztof.kozlowski+dt@linaro.org, shawnguo@kernel.org,
	conor+dt@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-imx@nxp.com, peter.chen@kernel.org,
	jun.li@nxp.com, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	imx@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v10 02/11] arm64: dts: imx8ulp: add usb nodes
Message-ID: <ZgvCTgB4lp0F83Kn@dragon>
References: <20240321081439.541799-1-xu.yang_2@nxp.com>
 <20240321081439.541799-2-xu.yang_2@nxp.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240321081439.541799-2-xu.yang_2@nxp.com>

On Thu, Mar 21, 2024 at 04:14:30PM +0800, Xu Yang wrote:
> Add USB nodes on i.MX8ULP platform which has 2 USB controllers.
> 
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
> 
> ---
> Changes in v2:
>  - no changes
> Changes in v3:
>  - no changes
> Changes in v4:
>  - no changes
> Changes in v5:
>  - no changes
> Changes in v6:
>  - drop usbphy aliases
> Changes in v7:
>  - no changes
> Changes in v8:
>  - no changes
> Changes in v9:
>  - no changes
> Changes in v10:
>  - no changes
> ---
>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 62 ++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index c4a0082f30d3..7da9461a5745 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -472,6 +472,68 @@ usdhc2: mmc@298f0000 {
>  				status = "disabled";
>  			};
>  
> +			usbotg1: usb@29900000 {
> +				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
> +				reg = <0x29900000 0x200>;
> +				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&pcc4 IMX8ULP_CLK_USB0>;
> +				power-domains = <&scmi_devpd IMX8ULP_PD_USB0>;
> +				phys = <&usbphy1>;
> +				fsl,usbmisc = <&usbmisc1 0>;
> +				ahb-burst-config = <0x0>;
> +				tx-burst-size-dword = <0x8>;
> +				rx-burst-size-dword = <0x8>;
> +				status = "disabled";
> +			};
> +
> +			usbmisc1: usbmisc@29900200 {
> +				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
> +						"fsl,imx6q-usbmisc";
> +				#index-cells = <1>;
> +				reg = <0x29900200 0x200>;

Could you move 'reg' above so that it's after compatible?

> +				status = "disabled";
> +			};
> +
> +			usbphy1: usb-phy@29910000 {
> +				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
> +				reg = <0x29910000 0x10000>;
> +				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&pcc4 IMX8ULP_CLK_USB0_PHY>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +
> +			usbotg2: usb@29920000 {
> +				compatible = "fsl,imx8ulp-usb", "fsl,imx7ulp-usb", "fsl,imx6ul-usb";
> +				reg = <0x29920000 0x200>;
> +				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&pcc4 IMX8ULP_CLK_USB1>;
> +				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
> +				phys = <&usbphy2>;
> +				fsl,usbmisc = <&usbmisc2 0>;
> +				ahb-burst-config = <0x0>;
> +				tx-burst-size-dword = <0x8>;
> +				rx-burst-size-dword = <0x8>;
> +				status = "disabled";
> +			};
> +
> +			usbmisc2: usbmisc@29920200 {
> +				compatible = "fsl,imx8ulp-usbmisc", "fsl,imx7d-usbmisc",
> +						"fsl,imx6q-usbmisc";
> +				#index-cells = <1>;
> +				reg = <0x29920200 0x200>;

Ditto

Shawn

> +				status = "disabled";
> +			};
> +
> +			usbphy2: usb-phy@29930000 {
> +				compatible = "fsl,imx8ulp-usbphy", "fsl,imx7ulp-usbphy";
> +				reg = <0x29930000 0x10000>;
> +				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&pcc4 IMX8ULP_CLK_USB1_PHY>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +
>  			fec: ethernet@29950000 {
>  				compatible = "fsl,imx8ulp-fec", "fsl,imx6ul-fec", "fsl,imx6q-fec";
>  				reg = <0x29950000 0x10000>;
> -- 
> 2.34.1
>