Received-SPF: pass (google.com: domain of linux-kernel+bounces-129081-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Wed, 3 Apr 2024 12:00:08 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Christian Marangi <ansuelsmth@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Sricharan Ramabadhran <quic_srichara@quicinc.com>,
	Md Sadre Alam <quic_mdalam@quicinc.com>,
	linux-mtd@lists.infradead.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH v3] mtd: rawnand: qcom: Fix broken misc_cmd_type in
 exec_op
Message-ID: <20240403063008.GA25309@thinkpad>
References: <20240402214136.29237-1-ansuelsmth@gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20240402214136.29237-1-ansuelsmth@gmail.com>

On Tue, Apr 02, 2024 at 11:41:34PM +0200, Christian Marangi wrote:
> misc_cmd_type in exec_op have multiple problems. With commit a82990c8a409
> ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path") it was
> reworked and generalized but actually dropped the handling of the
> OP_RESET_DEVICE command.
> 
> The rework itself was correct with supporting case where a single misc
> command is handled, but became problematic by the addition of exiting
> early if we didn't had an OP_BLOCK_ERASE or an OP_PROGRAM_PAGE operation.
> 
> Also additional logic was added without clear explaination causing the
> OP_RESET_DEVICE command to be broken on testing it on a ipq806x nandc.
> 
> Add some additional logic to restore OP_RESET_DEVICE command handling
> restoring original functionality.
> 

I'd like to reword the commit subject and description as below. But I hope
Miquel can ammend it while applying:

"mtd: rawnand: qcom: Fix broken OP_RESET_DEVICE command in qcom_misc_cmd_type_exec()

While migrating to exec_ops in commit a82990c8a409 ("mtd: rawnand: qcom:
Add read/read_start ops in exec_op path"), OP_RESET_DEVICE command handling
got broken unintentionally. Right now for the OP_RESET_DEVICE command,
qcom_misc_cmd_type_exec() will simply return 0 without handling it. Even,
if that gets fixed, an unnecessary FLASH_STATUS read descriptor command is
being added in the middle and that seems to be causing the command to fail
on IPQ806x devices.

So let's fix the above two issues to make OP_RESET_DEVICE command working
again."

> Fixes: a82990c8a409 ("mtd: rawnand: qcom: Add read/read_start ops in exec_op path")
> Cc: stable@vger.kernel.org
> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>

With the above change,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
> Changes v3:
> - Merge patches
> - Rework commit description
> Changes v2:
> - Split patches
> 
>  drivers/mtd/nand/raw/qcom_nandc.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index b079605c84d3..b8cff9240b28 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -2815,7 +2815,7 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
>  			      host->cfg0_raw & ~(7 << CW_PER_PAGE));
>  		nandc_set_reg(chip, NAND_DEV0_CFG1, host->cfg1_raw);
>  		instrs = 3;
> -	} else {
> +	} else if (q_op.cmd_reg != OP_RESET_DEVICE) {
>  		return 0;
>  	}
>  
> @@ -2830,9 +2830,8 @@ static int qcom_misc_cmd_type_exec(struct nand_chip *chip, const struct nand_sub
>  	nandc_set_reg(chip, NAND_EXEC_CMD, 1);
>  
>  	write_reg_dma(nandc, NAND_FLASH_CMD, instrs, NAND_BAM_NEXT_SGL);
> -	(q_op.cmd_reg == OP_BLOCK_ERASE) ? write_reg_dma(nandc, NAND_DEV0_CFG0,
> -	2, NAND_BAM_NEXT_SGL) : read_reg_dma(nandc,
> -	NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
> +	if (q_op.cmd_reg == OP_BLOCK_ERASE)
> +		write_reg_dma(nandc, NAND_DEV0_CFG0, 2, NAND_BAM_NEXT_SGL);
>  
>  	write_reg_dma(nandc, NAND_EXEC_CMD, 1, NAND_BAM_NEXT_SGL);
>  	read_reg_dma(nandc, NAND_FLASH_STATUS, 1, NAND_BAM_NEXT_SGL);
> -- 
> 2.43.0
> 

-- 
மணிவண்ணன் சதாசிவம்