Received-SPF: pass (google.com: domain of linux-kernel+bounces-129898-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
Date: Wed, 3 Apr 2024 14:59:37 +0100
From: "Russell King (Oracle)" <linux@armlinux.org.uk>
To: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Cc: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Dimitri Fedrau <dima.fedrau@gmail.com>,
	Stefan Eichenberger <eichest@gmail.com>, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux@ew.tq-group.com,
	alexander.stein@ew.tq-group.com
Subject: Re: [PATCH] net: phy: marvell-88q2xxx: add support for Rev B1 and B2
Message-ID: <Zg1gycEDL4llYrjI@shell.armlinux.org.uk>
References: <20240403-mv88q222x-revb1-b2-init-v1-1-48b855464c37@ew.tq-group.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240403-mv88q222x-revb1-b2-init-v1-1-48b855464c37@ew.tq-group.com>
Sender: Russell King (Oracle) <linux@armlinux.org.uk>

On Wed, Apr 03, 2024 at 03:45:22PM +0200, Gregor Herburger wrote:
> +static int mv88q222x_revb1_revb2_config_init(struct phy_device *phydev)
> +{
> +	bool is_rev_b2 = phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] == PHY_ID_88Q2220_REVB2;
> +	int ret, i;
> +
> +	for (i = 0; i < ARRAY_SIZE(mv88q222x_revb1_init_seq0); i++) {
> +		/* Rev B2 init sequence differs compared to Rev B1. As noted in Marvell API:
> +		 * Remove the instruction to enable TXDAC setting overwrite bit for Rev B2.
> +		 */
> +		if (is_rev_b2 && mv88q222x_revb1_init_seq1[i].regnum == 0xffe3)
> +			continue;
> +
> +		ret = phy_write_mmd(phydev, mv88q222x_revb1_init_seq0[i].devad,
> +				    mv88q222x_revb1_init_seq0[i].regnum,
> +				    mv88q222x_revb1_init_seq0[i].val);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	usleep_range(3000, 5000);
> +
> +	for (i = 0; i < ARRAY_SIZE(mv88q222x_revb1_init_seq1); i++) {
> +		ret = phy_write_mmd(phydev, mv88q222x_revb1_init_seq1[i].devad,
> +				    mv88q222x_revb1_init_seq1[i].regnum,
> +				    mv88q222x_revb1_init_seq1[i].val);
> +		if (ret < 0)
> +			return ret;
> +	}

I think a helper would be useful to write these sequences, rather than
writing the same code several times:

static int mv88q2xxx_write_mmd_vals(struct phy_device *phydev,
				    const struct mmd_val *vals, size_t len)
{
	int ret;

	for (; len; vals++, len--) {
		ret = phy_write_mmd(phydev, vals->devad, vals->regnum,
				    vals->val);
		if (ret < 0)
			return ret;
	}

	return 0;
}

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!