Received-SPF: pass (google.com: domain of linux-kernel+bounces-130962-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <962bd104-b30f-4fad-a41e-d0db349d8bd2@phytec.de>
Date: Thu, 4 Apr 2024 07:44:37 +0200
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH 2/2] arm64: dts: ti: k3-am642-phyboard-electra-rdk:
 Increase CAN max bitrate
To: Nathan Morrisson <nmorrisson@phytec.com>, <nm@ti.com>, <vigneshr@ti.com>,
	<kristo@kernel.org>, <robh@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>
CC: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <upstream@lists.phytec.de>
References: <20240402160825.1516036-1-nmorrisson@phytec.com>
 <20240402160825.1516036-3-nmorrisson@phytec.com>
Content-Language: en-US
From: Wadim Egorov <w.egorov@phytec.de>
In-Reply-To: <20240402160825.1516036-3-nmorrisson@phytec.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit

Am 02.04.24 um 18:08 schrieb Nathan Morrisson:
> The phyBOARD-Electra has two TCAN1044VDD CAN transceivers which
> support CAN FD at 8 Mbps.
> 
> Increase the maximum bitrate to 8 Mbps.
> 
> Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>

For both patches

Reviewed-by: Wadim Egorov <w.egorov@phytec.de>


> ---
>   arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> index 8237b8c815b8..522699ec65e8 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
> @@ -42,7 +42,7 @@ can_tc1: can-phy0 {
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&can_tc1_pins_default>;
>   		#phy-cells = <0>;
> -		max-bitrate = <5000000>;
> +		max-bitrate = <8000000>;
>   		standby-gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
>   	};
>   
> @@ -51,7 +51,7 @@ can_tc2: can-phy1 {
>   		pinctrl-names = "default";
>   		pinctrl-0 = <&can_tc2_pins_default>;
>   		#phy-cells = <0>;
> -		max-bitrate = <5000000>;
> +		max-bitrate = <8000000>;
>   		standby-gpios = <&main_gpio0 35 GPIO_ACTIVE_HIGH>;
>   	};
>