Received-SPF: pass (google.com: domain of linux-kernel+bounces-133744-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
To: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	Zhang Rui <rui.zhang@intel.com>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-pm@vger.kernel.org,
	linux-hwmon@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Ricardo Neri <ricardo.neri@intel.com>
Subject: [PATCH 0/3] drivers: thermal/hwmon: intel: Use model-specific bitmasks for temperature registers
Date: Fri,  5 Apr 2024 18:04:13 -0700
Message-Id: <20240406010416.4821-1-ricardo.neri-calderon@linux.intel.com>
Precedence: bulk

Hi,

We have been treating the register MSR_TEMPERATURE_TARGET as a
architectural. It is model-specific.

The registers IA32_[PACKAGE]_THERM_STATUS are architectural. However, they
have become model-specific: in recent processors the temperature readout
occupies bits [23:16] whereas the Intel Software Developer's manual
specifies that it uses [22:16].

Using incorrect bitmasks leads to incorrect temperature readings and
writes to reserved register bits. For instance, temperatures below ~-27C
(depending on the value of TjMax) would be read incorrectly if only the
bits [22:16] of IA32_THERM_[PACKAGE]_STATUS are used.

Update the intel_tcc library to use model-specific bitmasks. Also update
the hwmon/coretemp and intel_tcc_cooling drivers drivers to use the model
checking utilities of intel_tcc.

Updating hwmon/coretemp to use the intel_tcc library required to add a
weak reverse dependency on CONFIG_INTEL_TCC. The less attractive
alternative would be to duplicate the model checking functionality of
intel_tcc in hwmon/coretemp.

I have tested these patches on Alder Lake, Meteor Lake, and Grand Ridge
systems by looking at the temp*_input sysfs files of hwmon.

These patches apply cleanly on top of the `testing` branches of the
linux-pm and hwmon repositories.

Thanks and BR,
Ricardo

Ricardo Neri (3):
  thermal: intel: intel_tcc: Add model checks for temperature registers
  thermal: intel: intel_tcc_cooling: Use a model-specific bitmask for
    TCC offset
  hwmon: (coretemp) Use a model-specific bitmask to read registers

 drivers/hwmon/Kconfig                     |   1 +
 drivers/hwmon/coretemp.c                  |   6 +-
 drivers/thermal/intel/intel_tcc.c         | 177 +++++++++++++++++++++-
 drivers/thermal/intel/intel_tcc_cooling.c |   2 +-
 include/linux/intel_tcc.h                 |   8 +
 5 files changed, 187 insertions(+), 7 deletions(-)

-- 
2.34.1