Received-SPF: pass (google.com: domain of linux-kernel+bounces-133929-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
Sender: Guenter Roeck <groeck7@gmail.com>
Date: Sat, 6 Apr 2024 06:08:46 -0700
From: Guenter Roeck <linux@roeck-us.net>
To: Arnd Bergmann <arnd@kernel.org>
Cc: Andi Shyti <andi.shyti@kernel.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Jean Delvare <jdelvare@suse.de>, linux-i2c@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org
Subject: Re: [PATCH] i2c: i801: add I2C_MUX dependency
Message-ID: <e2d0fdde-ff8b-4851-b18a-89e69dd18d5f@roeck-us.net>
References: <20240405142823.615609-1-arnd@kernel.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240405142823.615609-1-arnd@kernel.org>

On Fri, Apr 05, 2024 at 04:27:43PM +0200, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@arndb.de>
> 
> When I2C_MUX is a loadable module but I2C_I801 is built-in, the newly
> added notifier function causes a link error:
> 
> x86_64-linux-ld: drivers/i2c/busses/i2c-i801.o: in function `i801_notifier_call':
> i2c-i801.c:(.text+0x1f5): undefined reference to `i2c_root_adapter'
> 
> This code is only built if I2C_MUX_GPIO is also enabled, so add a
> conditional dependency that allows building the driver as before if the
> GPIO part is disabled, but otherwise require the linker dependency at
> Kconfig level.
> 
> With the added dependency, the driver cannot be selected by a builtin
> ITCO_WDT driver when I2C_MUX_GPIO is a loadable module, so remove
> the 'select' statement in that driver as well. This was apparently
> never needed at compile-time, and the watchdog driver just needs either
> the LPC or the I2C drivers, but never both.
> 
> Configurations that rely on the implied 'select' from the watchdog
> driver now need to enable all three.
> 
> Fixes: 71b494e043d2 ("i2c: i801: Call i2c_register_spd for muxed child segments")
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  drivers/i2c/busses/Kconfig | 1 +
>  drivers/watchdog/Kconfig   | 2 --
>  2 files changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 1872f1995c77..2619018dd756 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -108,6 +108,7 @@ config I2C_HIX5HD2
>  config I2C_I801
>  	tristate "Intel 82801 (ICH/PCH)"
>  	depends on PCI
> +	depends on I2C_MUX || I2C_MUX_GPIO=n
>  	select P2SB if X86
>  	select CHECK_SIGNATURE if X86 && DMI
>  	select I2C_SMBUS
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 0b0df3fe1efd..4dfb3773e6e2 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1301,8 +1301,6 @@ config ITCO_WDT
>  	select WATCHDOG_CORE
>  	depends on I2C || I2C=n
>  	depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT
> -	select LPC_ICH if !EXPERT
> -	select I2C_I801 if !EXPERT && I2C

Sorry, I don't understand why LPC_ICH and I2C_I801 are neither a dependency
nor need to be selected. What if both LPC_ICH=n and I2C_I801=n, or if one is
selected but the other is needed to connect to the watchdog ?

Guenter

>  	help
>  	  Hardware driver for the intel TCO timer based watchdog devices.
>  	  These drivers are included in the Intel 82801 I/O Controller
> -- 
> 2.39.2
>