Received-SPF: pass (google.com: domain of linux-kernel+bounces-134335-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 3/4] arm64: dts: rockchip: drop redundant disable-gpios in Lubancat 1
Date: Sun,  7 Apr 2024 12:28:53 +0200
Message-Id: <20240407102854.38672-3-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20240407102854.38672-1-krzysztof.kozlowski@linaro.org>
References: <20240407102854.38672-1-krzysztof.kozlowski@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream.  This property looks
like some real hardware, just described wrongly.  Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.

This fixes dtbs_check warning:

  rk3566-lubancat-1.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
index 6ecdf5d28339..c1194d1e438d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts
@@ -447,7 +447,6 @@ rgmii_phy1: phy@0 {
 
 &pcie2x1 {
 	reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-	disable-gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 	vpcie3v3-supply = <&vcc3v3_pcie>;
 	status = "okay";
 };
-- 
2.34.1