Received-SPF: pass (google.com: domain of linux-kernel+bounces-134688-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Mon, 08 Apr 2024 04:04:17 +0300
Subject: [PATCH 3/3] usb: typec: ucsi_glink: drop special handling for
 CCI_BUSY
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240408-qcom-ucsi-fixes-bis-v1-3-716c145ca4b1@linaro.org>
References: <20240408-qcom-ucsi-fixes-bis-v1-0-716c145ca4b1@linaro.org>
In-Reply-To: <20240408-qcom-ucsi-fixes-bis-v1-0-716c145ca4b1@linaro.org>
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>, 
 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>, linux-usb@vger.kernel.org, 
 linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, 
 Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Newer Qualcomm platforms (sm8450+) successfully handle busy state and
send the Command Completion after sending the Busy state. Older devices
have firmware bug and can not continue after sending the CCI_BUSY state,
but the command that leads to CCI_BUSY is already forbidden by the
NO_PARTNER_PDOS quirk.

Follow other UCSI glue drivers and drop special handling for CCI_BUSY
event. Let the UCSI core properly handle this state.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/usb/typec/ucsi/ucsi_glink.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_glink.c b/drivers/usb/typec/ucsi/ucsi_glink.c
index 9ffea20020e7..b91d2d15d7d9 100644
--- a/drivers/usb/typec/ucsi/ucsi_glink.c
+++ b/drivers/usb/typec/ucsi/ucsi_glink.c
@@ -176,7 +176,8 @@ static int pmic_glink_ucsi_sync_write(struct ucsi *__ucsi, unsigned int offset,
 	left = wait_for_completion_timeout(&ucsi->sync_ack, 5 * HZ);
 	if (!left) {
 		dev_err(ucsi->dev, "timeout waiting for UCSI sync write response\n");
-		ret = -ETIMEDOUT;
+		/* return 0 here and let core UCSI code handle the CCI_BUSY */
+		ret = 0;
 	} else if (ucsi->sync_val) {
 		dev_err(ucsi->dev, "sync write returned: %d\n", ucsi->sync_val);
 	}
@@ -243,10 +244,7 @@ static void pmic_glink_ucsi_notify(struct work_struct *work)
 		ucsi_connector_change(ucsi->ucsi, con_num);
 	}
 
-	if (ucsi->sync_pending && cci & UCSI_CCI_BUSY) {
-		ucsi->sync_val = -EBUSY;
-		complete(&ucsi->sync_ack);
-	} else if (ucsi->sync_pending &&
+	if (ucsi->sync_pending &&
 		   (cci & (UCSI_CCI_ACK_COMPLETE | UCSI_CCI_COMMAND_COMPLETE))) {
 		complete(&ucsi->sync_ack);
 	}

-- 
2.39.2