Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755559AbYAVME5 (ORCPT ); Tue, 22 Jan 2008 07:04:57 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751013AbYAVMEu (ORCPT ); Tue, 22 Jan 2008 07:04:50 -0500 Received: from smtp-102-tuesday.noc.nerim.net ([62.4.17.102]:1646 "EHLO mallaury.nerim.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750781AbYAVMEs (ORCPT ); Tue, 22 Jan 2008 07:04:48 -0500 Date: Tue, 22 Jan 2008 13:01:58 +0100 From: Jean Delvare To: Felipe Balbi Cc: linux-kernel@vger.kernel.org, david-b@pacbell.net, tony@atomide.com, Linux I2C Subject: Re: [PATCH 2/2] I2C: ISP1301_OMAP: New-style i2c driver updates, part 2 Message-ID: <20080122130158.4d4d44dc@hyperion.delvare> In-Reply-To: <1199379597-6273-3-git-send-email-me@felipebalbi.com> References: <1199379597-6273-1-git-send-email-me@felipebalbi.com> <1199379597-6273-2-git-send-email-me@felipebalbi.com> <1199379597-6273-3-git-send-email-me@felipebalbi.com> X-Mailer: Sylpheed-Claws 2.5.5 (GTK+ 2.10.6; x86_64-suse-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12980 Lines: 435 Hi Felipe, On Thu, 3 Jan 2008 11:59:57 -0500, Felipe Balbi wrote: > Based on David Brownell's patch for tps65010, this patch > finish conversting isp1301_omap.c to new-style i2c driver. > > Signed-off-by: Felipe Balbi > --- > arch/arm/mach-omap1/board-h2.c | 6 ++- > arch/arm/mach-omap1/board-h3.c | 6 ++- > arch/arm/mach-omap2/board-h4.c | 12 +++ > drivers/i2c/chips/isp1301_omap.c | 149 +++++++++++++------------------------- > 4 files changed, 73 insertions(+), 100 deletions(-) > > diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c > index 1306812..0307f50 100644 > --- a/arch/arm/mach-omap1/board-h2.c > +++ b/arch/arm/mach-omap1/board-h2.c > @@ -350,8 +350,12 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { > .type = "tps65010", > .irq = OMAP_GPIO_IRQ(58), > }, > + { > + I2C_BOARD_INFO("isp1301_omap", 0x2d), > + .type = "isp1301_omap", > + .irq = OMAP_GPIO_IRQ(2), > + }, > /* TODO when driver support is ready: > - * - isp1301 OTG transceiver > * - optional ov9640 camera sensor at 0x30 > * - pcf9754 for aGPS control > * - ... etc > diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c > index 4f84ae2..71e285a 100644 > --- a/arch/arm/mach-omap1/board-h3.c > +++ b/arch/arm/mach-omap1/board-h3.c > @@ -463,8 +463,12 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { > .type = "tps65013", > /* .irq = OMAP_GPIO_IRQ(??), */ > }, > + { > + I2C_BOARD_INFO("isp1301_omap", 0x2d), > + .type = "isp1301_omap", > + .irq = OMAP_GPIO_IRQ(14), > + }, > /* TODO when driver support is ready: > - * - isp1301 OTG transceiver > * - optional ov9640 camera sensor at 0x30 > * - ... > */ > diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c > index f125f43..33ff80b 100644 > --- a/arch/arm/mach-omap2/board-h4.c > +++ b/arch/arm/mach-omap2/board-h4.c > @@ -301,6 +301,15 @@ static struct omap_board_config_kernel h4_config[] = { > { OMAP_TAG_LCD, &h4_lcd_config }, > }; > > +static struct i2c_board_info __initdata h4_i2c_board_info[] = { > + { > + I2C_BOARD_INFO("isp1301_omap", 0x2d), > + .type = "isp1301_omap", > + .irq = OMAP_GPIO_IRQ(125), > + }, > +}; > + > + > static void __init omap_h4_init(void) > { > /* > @@ -321,6 +330,9 @@ static void __init omap_h4_init(void) > } > #endif > > + i2c_register_board_info(1, h4_i2c_board_info, > + ARRAY_SIZE(h4_i2c_board_info)); > + > platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices)); > omap_board_config = h4_config; > omap_board_config_size = ARRAY_SIZE(h4_config); > diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c > index 37e1403..c7a7c48 100644 > --- a/drivers/i2c/chips/isp1301_omap.c > +++ b/drivers/i2c/chips/isp1301_omap.c > @@ -31,16 +31,12 @@ > #include > #include > #include > - > -#include > #include > > - > #ifndef DEBUG > #undef VERBOSE > #endif > > - > #define DRIVER_VERSION "24 August 2004" > #define DRIVER_NAME (isp1301_driver.driver.name) > > @@ -50,12 +46,8 @@ MODULE_LICENSE("GPL"); > struct isp1301 { > struct otg_transceiver otg; > struct i2c_client *client; > - struct i2c_client c; > void (*i2c_release)(struct device *dev); > > - int irq; > - int irq_type; > - > u32 last_otg_ctrl; > unsigned working:1; > > @@ -140,13 +132,6 @@ static inline void notresponding(struct isp1301 *isp) > /*-------------------------------------------------------------------------*/ > > /* only two addresses possible */ > -#define ISP_BASE 0x2c > -static unsigned short normal_i2c[] = { > - ISP_BASE, ISP_BASE + 1, > - I2C_CLIENT_END }; > - > -I2C_CLIENT_INSMOD; > - > static struct i2c_driver isp1301_driver; > > /* smbus apis are used for portability */ > @@ -1196,9 +1181,11 @@ static void isp1301_timer(unsigned long _isp) > > static void isp1301_release(struct device *dev) > { > - struct isp1301 *isp; > + struct i2c_client *client; > + struct isp1301 *isp; > > - isp = container_of(dev, struct isp1301, c.dev); > + client = container_of(dev, struct i2c_client, dev); > + isp = i2c_get_clientdata(client); This seems to be a quite complex way to do: isp = i2c_get_drvdata(dev); Or am I missing something? > > /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ > if (isp->i2c_release) > @@ -1208,30 +1195,27 @@ static void isp1301_release(struct device *dev) > > static struct isp1301 *the_transceiver; > > -static int isp1301_detach_client(struct i2c_client *i2c) > +static int __exit isp1301_remove(struct i2c_client *client) > { > - struct isp1301 *isp; > - > - isp = container_of(i2c, struct isp1301, c); > + struct isp1301 *isp = i2c_get_clientdata(client); > > isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); > isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); > - free_irq(isp->irq, isp); > + > + if (client->irq > 0) > + free_irq(client->irq, isp); > #ifdef CONFIG_USB_OTG > otg_unbind(isp); > #endif > - if (machine_is_omap_h2()) > - omap_free_gpio(2); > - Why? > isp->timer.data = 0; > set_bit(WORK_STOP, &isp->todo); > del_timer_sync(&isp->timer); > flush_scheduled_work(); > > - put_device(&i2c->dev); > + put_device(&client->dev); > the_transceiver = 0; > > - return i2c_detach_client(i2c); > + return 0; > } > > /*-------------------------------------------------------------------------*/ > @@ -1301,9 +1285,6 @@ isp1301_set_host(struct otg_transceiver *otg, struct usb_bus *host) > > power_up(isp); > > - if (machine_is_omap_h2()) > - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); > - Where has this code gone? Why is it no longer needed? (Did you test you patch on OMAP H2?) > dev_info(&isp->client->dev, "A-Host sessions ok\n"); > isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, > INTR_ID_GND); > @@ -1481,11 +1462,10 @@ isp1301_start_hnp(struct otg_transceiver *dev) > /*-------------------------------------------------------------------------*/ > > /* no error returns, they'd just make bus scanning stop */ > -static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) > +static int __init isp1301_probe(struct i2c_client *client) > { > int status; > struct isp1301 *isp; > - struct i2c_client *i2c; > > if (the_transceiver) > return 0; > @@ -1498,46 +1478,35 @@ static int isp1301_probe(struct i2c_adapter *bus, int address, int kind) > init_timer(&isp->timer); > isp->timer.function = isp1301_timer; > isp->timer.data = (unsigned long) isp; > - > - isp->irq = -1; > - isp->irq_type = 0; > - isp->c.addr = address; > - i2c_set_clientdata(&isp->c, isp); > - isp->c.adapter = bus; > - isp->c.driver = &isp1301_driver; > - strlcpy(isp->c.name, DRIVER_NAME, I2C_NAME_SIZE); > - isp->client = i2c = &isp->c; > + isp->client = client; > > /* if this is a true probe, verify the chip ... */ > - if (kind < 0) { > - status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); > - if (status != I2C_VENDOR_ID_PHILIPS) { > - dev_dbg(&bus->dev, "addr %d not philips id: %d\n", > - address, status); > - goto fail1; > - } > - status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); > - if (status != I2C_PRODUCT_ID_PHILIPS_1301) { > - dev_dbg(&bus->dev, "%d not isp1301, %d\n", > - address, status); > - goto fail1; > - } > + status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); > + if (status != I2C_VENDOR_ID_PHILIPS) { > + dev_dbg(&client->dev, "not philips id: %d\n", > + status); Fits on a single line. > + goto fail1; > + } > + status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); > + if (status != I2C_PRODUCT_ID_PHILIPS_1301) { > + dev_dbg(&client->dev, "not isp1301, %d\n", > + status); Same here. > + goto fail1; > } > > - status = i2c_attach_client(i2c); > if (status < 0) { > - dev_dbg(&bus->dev, "can't attach %s to device %d, err %d\n", > - DRIVER_NAME, address, status); > + dev_dbg(&client->dev, "can't attach %s to device, err %d\n", > + DRIVER_NAME, status); It doesn't make sense to remove the call to i2c_attach_client() but preserve the status check and debug message! > fail1: > kfree(isp); > return 0; > } > - isp->i2c_release = i2c->dev.release; > - i2c->dev.release = isp1301_release; > + isp->i2c_release = client->dev.release; > + client->dev.release = isp1301_release; > > /* initial development used chiprev 2.00 */ > - status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE); > - dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n", > + status = i2c_smbus_read_word_data(client, ISP1301_BCD_DEVICE); > + dev_info(&client->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n", > status >> 8, status & 0xff); > > /* make like power-on reset */ > @@ -1558,40 +1527,25 @@ fail1: > #ifdef CONFIG_USB_OTG > status = otg_bind(isp); > if (status < 0) { > - dev_dbg(&i2c->dev, "can't bind OTG\n"); > + dev_dbg(&client->dev, "can't bind OTG\n"); > goto fail2; > } > #endif > > - if (machine_is_omap_h2()) { > - /* full speed signaling by default */ > - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, > - MC1_SPEED_REG); > - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, > - MC2_SPD_SUSP_CTRL); > - > - /* IRQ wired at M14 */ > - omap_cfg_reg(M14_1510_GPIO2); > - isp->irq = OMAP_GPIO_IRQ(2); > - if (gpio_request(2, "isp1301") == 0) > - gpio_direction_input(2); > - isp->irq_type = IRQF_TRIGGER_FALLING; > - } Again, why would you remove this code? > - > - isp->irq_type |= IRQF_SAMPLE_RANDOM; > - status = request_irq(isp->irq, isp1301_irq, > - isp->irq_type, DRIVER_NAME, isp); > + status = request_irq(client->irq, isp1301_irq, > + IRQF_SAMPLE_RANDOM | IRQF_TRIGGER_FALLING, > + DRIVER_NAME, isp); When freeing the irq you first test that client->irq > 0, but when requesting it you do not? It's inconsistent. Also, the original code was passing different IRQF flags depending on the platform, your changes force the same mode for everyone. This doesn't look correct. > if (status < 0) { > - dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", > - isp->irq, status); > + dev_dbg(&client->dev, "can't get IRQ %d, err %d\n", > + client->irq, status); > #ifdef CONFIG_USB_OTG > fail2: > #endif > - i2c_detach_client(i2c); > + i2c_detach_client(client); > goto fail1; > } > > - isp->otg.dev = &isp->client->dev; > + isp->otg.dev = &client->dev; > isp->otg.label = DRIVER_NAME; > > isp->otg.set_host = isp1301_set_host, > @@ -1608,43 +1562,42 @@ fail2: > update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); > update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); > #endif > - Noise, please revert. > dump_regs(isp, __FUNCTION__); > > #ifdef VERBOSE > mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); > - dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES); > + dev_dbg(&client->dev, "scheduled timer, %d min\n", TIMER_MINUTES); > #endif > > status = otg_set_transceiver(&isp->otg); > if (status < 0) > - dev_err(&i2c->dev, "can't register transceiver, %d\n", > + dev_err(&client->dev, "can't register transceiver, %d\n", > status); > > return 0; > } > > -static int isp1301_scan_bus(struct i2c_adapter *bus) > -{ > - if (!i2c_check_functionality(bus, I2C_FUNC_SMBUS_BYTE_DATA > - | I2C_FUNC_SMBUS_READ_WORD_DATA)) > - return -EINVAL; > - return i2c_probe(bus, &addr_data, isp1301_probe); > -} > - > static struct i2c_driver isp1301_driver = { > .driver = { > .name = "isp1301_omap", > }, > - .attach_adapter = isp1301_scan_bus, > - .detach_client = isp1301_detach_client, > + .probe = isp1301_probe, > + .remove = __exit_p(isp1301_remove), > }; > > /*-------------------------------------------------------------------------*/ > > static int __init isp_init(void) > { > - return i2c_add_driver(&isp1301_driver); > + int status = -ENODEV; > + > + printk(KERN_INFO "%s: version %s\n", DRIVER_NAME, DRIVER_VERSION); What's the point of printing a driver version that nobody bothers updating? Most i2c chip drivers keep quiet when loaded, they print a message when a device is actually found, as this driver is doing. > + > + status = i2c_add_driver(&isp1301_driver); > + if (status) > + printk(KERN_ERR "%s failed to probe\n", DRIVER_NAME); This is extremely unlikely to happen, and if it did, i2c-core would already log a more informative error message, and insmod/modprobe as well. So you can just call i2c_add_driver() and be done with it (as the driver was originally doing.) > + > + return status; > } > module_init(isp_init); > -- Jean Delvare -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/