Received-SPF: pass (google.com: domain of linux-kernel+bounces-136664-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Date: Tue, 9 Apr 2024 15:43:24 +0530
Subject: [PATCH v10 6/6] PCI: qcom: Add OPP support to scale performance
 state of power domain
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-ID: <20240409-opp_support-v10-6-1956e6be343f@quicinc.com>
References: <20240409-opp_support-v10-0-1956e6be343f@quicinc.com>
In-Reply-To: <20240409-opp_support-v10-0-1956e6be343f@quicinc.com>
To: Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio
	<konrad.dybcio@linaro.org>,
        Rob Herring <robh@kernel.org>,
        "Krzysztof
 Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley
	<conor+dt@kernel.org>,
        Manivannan Sadhasivam
	<manivannan.sadhasivam@linaro.org>,
        Lorenzo Pieralisi
	<lpieralisi@kernel.org>,
        =?utf-8?q?Krzysztof_Wilczy=C5=84ski?=
	<kw@linux.com>,
        Bjorn Helgaas <bhelgaas@google.com>, <johan+linaro@kernel.org>,
        <bmasney@redhat.com>, <djakov@kernel.org>
CC: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
        <vireshk@kernel.org>, <quic_vbadigan@quicinc.com>,
        <quic_skananth@quicinc.com>, <quic_nitegupt@quicinc.com>,
        <quic_parass@quicinc.com>, <quic_krichai@quicinc.com>,
        <krzysztof.kozlowski@linaro.org>

QCOM Resource Power Manager-hardened (RPMh) is a hardware block which
maintains hardware state of a regulator by performing max aggregation of
the requests made by all of the clients.

PCIe controller can operate on different RPMh performance state of power
domain based on the speed of the link. And this performance state varies
from target to target, like some controllers support GEN3 in NOM (Nominal)
voltage corner, while some other supports GEN3 in low SVS (static voltage
scaling).

The SoC can be more power efficient if we scale the performance state
based on the aggregate PCIe link bandwidth.

Add Operating Performance Points (OPP) support to vote for RPMh state based
on the aggregate link bandwidth.

OPP can handle ICC bw voting also, so move ICC bw voting through OPP
framework if OPP entries are present.

As we are moving ICC voting as part of OPP, don't initialize ICC if OPP
is supported.

Before PCIe link is initialized vote for highest OPP in the OPP table,
so that we are voting for maximum voltage corner for the link to come up
in maximum supported speed.

Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 81 ++++++++++++++++++++++++++++------
 1 file changed, 67 insertions(+), 14 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index e53422171c01..ad4f456619cb 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -22,6 +22,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/pci.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/phy/pcie.h>
@@ -1443,15 +1444,13 @@ static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
 	return 0;
 }
 
-static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
+static void qcom_pcie_icc_opp_update(struct qcom_pcie *pcie)
 {
 	struct dw_pcie *pci = pcie->pci;
-	u32 offset, status;
+	u32 offset, status, freq;
+	struct dev_pm_opp *opp;
 	int speed, width;
-	int ret;
-
-	if (!pcie->icc_mem)
-		return;
+	int ret, mbps;
 
 	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
@@ -1463,10 +1462,26 @@ static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
 	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
 	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
 
-	ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
-	if (ret) {
-		dev_err(pci->dev, "Failed to set interconnect bandwidth for PCIe-MEM: %d\n",
-			ret);
+	if (pcie->icc_mem) {
+		ret = icc_set_bw(pcie->icc_mem, 0, width * QCOM_PCIE_LINK_SPEED_TO_BW(speed));
+		if (ret) {
+			dev_err(pci->dev, "Failed to set interconnect bandwidth for PCIe-MEM: %d\n",
+				ret);
+		}
+	} else {
+		mbps = pcie_link_speed_to_mbps(pcie_link_speed[speed]);
+		if (mbps < 0)
+			return;
+
+		freq = mbps * 1000;
+		opp = dev_pm_opp_find_freq_exact(pci->dev, freq * width, true);
+		if (!IS_ERR(opp)) {
+			ret = dev_pm_opp_set_opp(pci->dev, opp);
+			if (ret)
+				dev_err(pci->dev, "Failed to set opp for freq (%ld): %d\n",
+					dev_pm_opp_get_freq(opp), ret);
+		}
+		dev_pm_opp_put(opp);
 	}
 }
 
@@ -1510,7 +1525,9 @@ static void qcom_pcie_init_debugfs(struct qcom_pcie *pcie)
 static int qcom_pcie_probe(struct platform_device *pdev)
 {
 	const struct qcom_pcie_cfg *pcie_cfg;
+	unsigned long max_freq = INT_MAX;
 	struct device *dev = &pdev->dev;
+	struct dev_pm_opp *opp;
 	struct qcom_pcie *pcie;
 	struct dw_pcie_rp *pp;
 	struct resource *res;
@@ -1578,9 +1595,42 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_pm_runtime_put;
 	}
 
-	ret = qcom_pcie_icc_init(pcie);
-	if (ret)
+	/* OPP table is optional */
+	ret = devm_pm_opp_of_add_table(dev);
+	if (ret && ret != -ENODEV) {
+		dev_err_probe(dev, ret, "Failed to add OPP table\n");
 		goto err_pm_runtime_put;
+	}
+
+	/*
+	 * Before PCIe link is initialized vote for highest OPP in the OPP table,
+	 * so that we are voting for maximum voltage corner for the link to come up
+	 * in maximum supported speed. At the end of the probe(), OPP will be
+	 * updated using qcom_pcie_icc_opp_update().
+	 */
+	if (!ret) {
+		opp = dev_pm_opp_find_freq_floor(dev, &max_freq);
+		if (IS_ERR(opp)) {
+			dev_err_probe(pci->dev, PTR_ERR(opp),
+				      "Unable to find max freq OPP\n");
+			goto err_pm_runtime_put;
+		} else {
+			ret = dev_pm_opp_set_opp(dev, opp);
+		}
+
+		dev_pm_opp_put(opp);
+		if (ret) {
+			dev_err_probe(pci->dev, ret,
+				      "Failed to set OPP for freq (%ld): %d\n",
+				      max_freq, ret);
+			goto err_pm_runtime_put;
+		}
+	} else {
+		/* Skip ICC init if OPP is supported as it is handled by OPP */
+		ret = qcom_pcie_icc_init(pcie);
+		if (ret)
+			goto err_pm_runtime_put;
+	}
 
 	ret = pcie->cfg->ops->get_resources(pcie);
 	if (ret)
@@ -1600,7 +1650,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_phy_exit;
 	}
 
-	qcom_pcie_icc_update(pcie);
+	qcom_pcie_icc_opp_update(pcie);
 
 	if (pcie->mhi)
 		qcom_pcie_init_debugfs(pcie);
@@ -1660,6 +1710,9 @@ static int qcom_pcie_suspend_noirq(struct device *dev)
 		ret = icc_disable(pcie->icc_cpu);
 		if (ret)
 			dev_err(dev, "Failed to disable Interconnect path of CPU-PCIe: %d\n", ret);
+
+		if (!pcie->icc_mem)
+			dev_pm_opp_set_opp(pcie->pci->dev, NULL);
 	}
 	return ret;
 }
@@ -1685,7 +1738,7 @@ static int qcom_pcie_resume_noirq(struct device *dev)
 		pcie->suspended = false;
 	}
 
-	qcom_pcie_icc_update(pcie);
+	qcom_pcie_icc_opp_update(pcie);
 
 	return 0;
 }

-- 
2.42.0