Received-SPF: pass (google.com: domain of linux-kernel+bounces-142585-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Precedence: bulk
MIME-Version: 1.0
References: <20240410122657.2051132-1-claudiu.beznea.uj@bp.renesas.com>
In-Reply-To: <20240410122657.2051132-1-claudiu.beznea.uj@bp.renesas.com>
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Fri, 12 Apr 2024 13:30:43 +0200
Message-ID: <CAPDyKFr405qt58wrqNdSn8bQPRqPKJ1omUZHS_VpQrX5zxUJug@mail.gmail.com>
Subject: Re: [PATCH v3 0/9] clk: renesas: rzg2l: Add support for power domains
To: Claudiu <claudiu.beznea@tuxon.dev>
Cc: geert+renesas@glider.be, mturquette@baylibre.com, sboyd@kernel.org, 
	robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, 
	magnus.damm@gmail.com, linux-renesas-soc@vger.kernel.org, 
	linux-clk@vger.kernel.org, devicetree@vger.kernel.org, 
	linux-kernel@vger.kernel.org, 
	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Content-Type: text/plain; charset="UTF-8"

On Wed, 10 Apr 2024 at 14:27, Claudiu <claudiu.beznea@tuxon.dev> wrote:
>
> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>
> Hi,
>
> Series adds support for power domains on rzg2l driver.
>
> RZ/G2L kind of devices support a functionality called MSTOP (module
> stop/standby). According to hardware manual the module could be switch
> to standby after its clocks are disabled. The reverse order of operation
> should be done when enabling a module (get the module out of standby,
> enable its clocks etc).
>
> In [1] the MSTOP settings were implemented by adding code in driver
> to attach the MSTOP state to the IP clocks. But it has been proposed
> to implement it as power domain. The result is this series.
>
> Along with MSTOP functionality there is also module power down
> functionality (which is currently available only on RZ/G3S). This has
> been also implemented through power domains.
>
> The DT bindings were updated with power domain IDs (plain integers
> that matches the DT with driver data structures). The current DT
> bindings were updated with module IDs for the modules listed in tables
> with name "Registers for Module Standby Mode" (see HW manual) exception
> being RZ/G3S where, due to the power down functionality, the DDR,
> TZCDDR, OTFDE_DDR were also added, to avoid system being blocked due
> to the following lines of code from patch 6/9.
>
> +       /* Prepare for power down the BUSes in power down mode. */
> +       if (info->pm_domain_pwrdn_mstop)
> +               writel(CPG_PWRDN_MSTOP_ENABLE, priv->base + CPG_PWRDN_MSTOP);
>
> Domain IDs were added to all SoC specific bindings.
>
> Thank you,
> Claudiu Beznea
>
> Changes in v3:
> - collected tags
> - dinamically detect if a SCIF is serial console and populate
>   pd->suspend_check
> - dropped patch 09/10 from v2
>
> Changes in v2:
> - addressed review comments
> - dropped:
>     - dt-bindings: clock: r9a09g011-cpg: Add always-on power domain IDs
>     - clk: renesas: r9a07g043: Add initial support for power domains
>     - clk: renesas: r9a07g044: Add initial support for power domains
>     - clk: renesas: r9a09g011: Add initial support for power domains
>     - clk: renesas: r9a09g011: Add initial support for power domains
>     - arm64: dts: renesas: r9a07g043: Update #power-domain-cells = <1>
>     - arm64: dts: renesas: r9a07g044: Update #power-domain-cells = <1>
>     - arm64: dts: renesas: r9a07g054: Update #power-domain-cells = <1>
>     - arm64: dts: renesas: r9a09g011: Update #power-domain-cells = <1>
>   as suggested in the review process
> - dropped "arm64: dts: renesas: rzg3s-smarc-som: Guard the ethernet IRQ
>   GPIOs with proper flags" patch as it was integrated
> - added suspend to RAM support
> - collected tag
>
> [1] https://lore.kernel.org/all/20231120070024.4079344-4-claudiu.beznea.uj@bp.renesas.com/
>
>
> Claudiu Beznea (9):
>   dt-bindings: clock: r9a07g043-cpg: Add power domain IDs
>   dt-bindings: clock: r9a07g044-cpg: Add power domain IDs
>   dt-bindings: clock: r9a07g054-cpg: Add power domain IDs
>   dt-bindings: clock: r9a08g045-cpg: Add power domain IDs
>   dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells =
>     <1> for RZ/G3S
>   clk: renesas: rzg2l: Extend power domain support
>   clk: renesas: r9a08g045: Add support for power domains
>   clk: renesas: rzg2l-cpg: Add suspend/resume support for power domains

In particular patches like the above I would appreciate to be cced on
to help review, but I understand that it's easy to miss in cases like
this.

That said, maybe we should start separating and moving the
power-domain parts out from the clk directory into the pmdomain
directory instead, that should improve these situations!?

>   arm64: dts: renesas: r9a08g045: Update #power-domain-cells = <1>
>
>  .../bindings/clock/renesas,rzg2l-cpg.yaml     |  18 +-
>  arch/arm64/boot/dts/renesas/r9a08g045.dtsi    |  20 +-
>  drivers/clk/renesas/r9a08g045-cpg.c           |  61 ++++
>  drivers/clk/renesas/rzg2l-cpg.c               | 269 +++++++++++++++++-
>  drivers/clk/renesas/rzg2l-cpg.h               |  77 +++++
>  include/dt-bindings/clock/r9a07g043-cpg.h     |  52 ++++
>  include/dt-bindings/clock/r9a07g044-cpg.h     |  58 ++++
>  include/dt-bindings/clock/r9a07g054-cpg.h     |  58 ++++
>  include/dt-bindings/clock/r9a08g045-cpg.h     |  70 +++++
>  9 files changed, 659 insertions(+), 24 deletions(-)
>

Kind regards
Uffe