Received-SPF: pass (google.com: domain of linux-kernel+bounces-144873-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Udit Kumar <u-kumar1@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <francesco@dolcini.it>
CC: <kristo@kernel.org>, <robh@kernel.org>, <krzk+dt@kernel.org>,
        <conor+dt@kernel.org>, <linux-kernel@vger.kernel.org>,
        Udit Kumar
	<u-kumar1@ti.com>
Subject: [PATCH v2 1/2] arm64: dts: ti: k3-j784s4-evm: Fix UART pin type and macro type
Date: Mon, 15 Apr 2024 15:26:04 +0530
Message-ID: <20240415095605.3547933-2-u-kumar1@ti.com>
In-Reply-To: <20240415095605.3547933-1-u-kumar1@ti.com>
References: <20240415095605.3547933-1-u-kumar1@ti.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

Along fixing wkup UART TX pin as OUTPUT instead of INPUT,
updating J784S4 macro for pin mux instead of J721S2.

Fixes: 5dfbd1debc8c ("arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom")
Fixes: 6fa5d37a2f34 ("arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts")
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 81fd7afac8c5..d511b25d62e3 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -343,16 +343,16 @@ &wkup_pmx2 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
-			J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */
+			J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */
+			J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */
 		>;
 	};
 
 	wkup_i2c0_pins_default: wkup-i2c0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
-			J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
-			J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
+			J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */
+			J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */
 		>;
 	};
 
-- 
2.34.1