Received-SPF: pass (google.com: domain of linux-kernel+bounces-145767-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Content-Type: text/plain; charset=iso-8859-15; format=flowed; delsp=yes
To: dave.hansen@linux.intel.com, kai.huang@intel.com, tj@kernel.org,
 mkoutny@suse.com, linux-kernel@vger.kernel.org, linux-sgx@vger.kernel.org,
 x86@kernel.org, cgroups@vger.kernel.org, tglx@linutronix.de, mingo@redhat.com,
 bp@alien8.de, hpa@zytor.com, sohil.mehta@intel.com,
 tim.c.chen@linux.intel.com, "Jarkko Sakkinen" <jarkko@kernel.org>
Cc: zhiquan1.li@intel.com, kristen@linux.intel.com, seanjc@google.com,
 zhanb@microsoft.com, anakrish@microsoft.com, mikko.ylinen@linux.intel.com,
 yangjie@microsoft.com, chrisyan@microsoft.com
Subject: Re: [PATCH v11 14/14] selftests/sgx: Add scripts for EPC cgroup
 testing
References: <20240410182558.41467-1-haitao.huang@linux.intel.com>
 <20240410182558.41467-15-haitao.huang@linux.intel.com>
 <D0JXP8HZLEQZ.3PHVXZI140VIH@kernel.org>
 <op.2l81wdjdwjvjmi@hhuan26-mobl.amr.corp.intel.com>
 <D0KXLFE83H9V.3GNOZNN4II125@kernel.org>
Date: Mon, 15 Apr 2024 14:28:10 -0500
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: "Haitao Huang" <haitao.huang@linux.intel.com>
Organization: Intel
Message-ID: <op.2maa08nfwjvjmi@hhuan26-mobl.amr.corp.intel.com>
In-Reply-To: <D0KXLFE83H9V.3GNOZNN4II125@kernel.org>
User-Agent: Opera Mail/1.0 (Win32)

On Mon, 15 Apr 2024 14:08:44 -0500, Jarkko Sakkinen <jarkko@kernel.org>  
wrote:

> On Mon Apr 15, 2024 at 6:13 AM EEST, Haitao Huang wrote:
>> On Sun, 14 Apr 2024 10:01:03 -0500, Jarkko Sakkinen <jarkko@kernel.org>
>> wrote:
>>
>> > On Wed Apr 10, 2024 at 9:25 PM EEST, Haitao Huang wrote:
>> >> To run selftests for EPC cgroup:
>> >>
>> >> sudo ./run_epc_cg_selftests.sh
>> >>
>> >> To watch misc cgroup 'current' changes during testing, run this in a
>> >> separate terminal:
>> >>
>> >> ./watch_misc_for_tests.sh current
>> >>
>> >> With different cgroups, the script starts one or multiple concurrent  
>> SGX
>> >> selftests (test_sgx), each to run the unclobbered_vdso_oversubscribed
>> >> test case, which loads an enclave of EPC size equal to the EPC  
>> capacity
>> >> available on the platform. The script checks results against the
>> >> expectation set for each cgroup and reports success or failure.
>> >>
>> >> The script creates 3 different cgroups at the beginning with  
>> following
>> >> expectations:
>> >>
>> >> 1) SMALL - intentionally small enough to fail the test loading an
>> >> enclave of size equal to the capacity.
>> >> 2) LARGE - large enough to run up to 4 concurrent tests but fail  
>> some if
>> >> more than 4 concurrent tests are run. The script starts 4 expecting  
>> at
>> >> least one test to pass, and then starts 5 expecting at least one test
>> >> to fail.
>> >> 3) LARGER - limit is the same as the capacity, large enough to run  
>> lots
>> >> of
>> >> concurrent tests. The script starts 8 of them and expects all pass.
>> >> Then it reruns the same test with one process randomly killed and
>> >> usage checked to be zero after all processes exit.
>> >>
>> >> The script also includes a test with low mem_cg limit and LARGE  
>> sgx_epc
>> >> limit to verify that the RAM used for per-cgroup reclamation is  
>> charged
>> >> to a proper mem_cg. For this test, it turns off swapping before  
>> start,
>> >> and turns swapping back on afterwards.
>> >>
>> >> Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com>
>> >> ---
>> >> V11:
>> >> - Remove cgroups-tools dependency and make scripts ash compatible.
>> >> (Jarkko)
>> >> - Drop support for cgroup v1 and simplify. (Michal, Jarkko)
>> >> - Add documentation for functions. (Jarkko)
>> >> - Turn off swapping before memcontrol tests and back on after
>> >> - Format and style fixes, name for hard coded values
>> >>
>> >> V7:
>> >> - Added memcontrol test.
>> >>
>> >> V5:
>> >> - Added script with automatic results checking, remove the  
>> interactive
>> >> script.
>> >> - The script can run independent from the series below.
>> >> ---
>> >>  tools/testing/selftests/sgx/ash_cgexec.sh     |  16 +
>> >>  .../selftests/sgx/run_epc_cg_selftests.sh     | 275  
>> ++++++++++++++++++
>> >>  .../selftests/sgx/watch_misc_for_tests.sh     |  11 +
>> >>  3 files changed, 302 insertions(+)
>> >>  create mode 100755 tools/testing/selftests/sgx/ash_cgexec.sh
>> >>  create mode 100755  
>> tools/testing/selftests/sgx/run_epc_cg_selftests.sh
>> >>  create mode 100755  
>> tools/testing/selftests/sgx/watch_misc_for_tests.sh
>> >>
>> >> diff --git a/tools/testing/selftests/sgx/ash_cgexec.sh
>> >> b/tools/testing/selftests/sgx/ash_cgexec.sh
>> >> new file mode 100755
>> >> index 000000000000..cfa5d2b0e795
>> >> --- /dev/null
>> >> +++ b/tools/testing/selftests/sgx/ash_cgexec.sh
>> >> @@ -0,0 +1,16 @@
>> >> +#!/usr/bin/env sh
>> >> +# SPDX-License-Identifier: GPL-2.0
>> >> +# Copyright(c) 2024 Intel Corporation.
>> >> +
>> >> +# Start a program in a given cgroup.
>> >> +# Supports V2 cgroup paths, relative to /sys/fs/cgroup
>> >> +if [ "$#" -lt 2 ]; then
>> >> +    echo "Usage: $0 <v2 cgroup path> <command> [args...]"
>> >> +    exit 1
>> >> +fi
>> >> +# Move this shell to the cgroup.
>> >> +echo 0 >/sys/fs/cgroup/$1/cgroup.procs
>> >> +shift
>> >> +# Execute the command within the cgroup
>> >> +exec "$@"
>> >> +
>> >> diff --git a/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
>> >> b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
>> >> new file mode 100755
>> >> index 000000000000..dd56273056fc
>> >> --- /dev/null
>> >> +++ b/tools/testing/selftests/sgx/run_epc_cg_selftests.sh
>> >> @@ -0,0 +1,275 @@
>> >> +#!/usr/bin/env sh
>> >> +# SPDX-License-Identifier: GPL-2.0
>> >> +# Copyright(c) 2023, 2024 Intel Corporation.
>> >> +
>> >> +TEST_ROOT_CG=selftest
>> >> +TEST_CG_SUB1=$TEST_ROOT_CG/test1
>> >> +TEST_CG_SUB2=$TEST_ROOT_CG/test2
>> >> +# We will only set limit in test1 and run tests in test3
>> >> +TEST_CG_SUB3=$TEST_ROOT_CG/test1/test3
>> >> +TEST_CG_SUB4=$TEST_ROOT_CG/test4
>> >> +
>> >> +# Cgroup v2 only
>> >> +CG_ROOT=/sys/fs/cgroup
>> >> +mkdir -p $CG_ROOT/$TEST_CG_SUB1
>> >> +mkdir -p $CG_ROOT/$TEST_CG_SUB2
>> >> +mkdir -p $CG_ROOT/$TEST_CG_SUB3
>> >> +mkdir -p $CG_ROOT/$TEST_CG_SUB4
>> >> +
>> >> +# Turn on misc and memory controller in non-leaf nodes
>> >> +echo "+misc" >  $CG_ROOT/cgroup.subtree_control && \
>> >> +echo "+memory" > $CG_ROOT/cgroup.subtree_control && \
>> >> +echo "+misc" >  $CG_ROOT/$TEST_ROOT_CG/cgroup.subtree_control && \
>> >> +echo "+memory" > $CG_ROOT/$TEST_ROOT_CG/cgroup.subtree_control && \
>> >> +echo "+misc" >  $CG_ROOT/$TEST_CG_SUB1/cgroup.subtree_control
>> >> +if [ $? -ne 0 ]; then
>> >> +    echo "# Failed setting up cgroups, make sure misc and memory
>> >> cgroups are enabled."
>> >> +    exit 1
>> >> +fi
>> >> +
>> >> +CAPACITY=$(grep "sgx_epc" "$CG_ROOT/misc.capacity" | awk '{print  
>> $2}')
>> >> +# This is below number of VA pages needed for enclave of capacity
>> >> size. So
>> >> +# should fail oversubscribed cases
>> >> +SMALL=$(( CAPACITY / 512 ))
>> >> +
>> >> +# At least load one enclave of capacity size successfully, maybe up  
>> to
>> >> 4.
>> >> +# But some may fail if we run more than 4 concurrent enclaves of
>> >> capacity size.
>> >> +LARGE=$(( SMALL * 4 ))
>> >> +
>> >> +# Load lots of enclaves
>> >> +LARGER=$CAPACITY
>> >> +echo "# Setting up limits."
>> >> +echo "sgx_epc $SMALL" > $CG_ROOT/$TEST_CG_SUB1/misc.max && \
>> >> +echo "sgx_epc $LARGE" >  $CG_ROOT/$TEST_CG_SUB2/misc.max && \
>> >> +echo "sgx_epc $LARGER" > $CG_ROOT/$TEST_CG_SUB4/misc.max
>> >> +if [ $? -ne 0 ]; then
>> >> +    echo "# Failed setting up misc limits."
>> >> +    exit 1
>> >> +fi
>> >> +
>> >> +clean_up()
>> >> +{
>> >> +    sleep 2
>> >> +    rmdir $CG_ROOT/$TEST_CG_SUB2
>> >> +    rmdir $CG_ROOT/$TEST_CG_SUB3
>> >> +    rmdir $CG_ROOT/$TEST_CG_SUB4
>> >> +    rmdir $CG_ROOT/$TEST_CG_SUB1
>> >> +    rmdir $CG_ROOT/$TEST_ROOT_CG
>> >> +}
>> >> +
>> >> +timestamp=$(date +%Y%m%d_%H%M%S)
>> >> +
>> >> +test_cmd="./test_sgx -t unclobbered_vdso_oversubscribed"
>> >> +
>> >> +PROCESS_SUCCESS=1
>> >> +PROCESS_FAILURE=0
>> >> +
>> >> +# Wait for a process and check for expected exit status.
>> >> +#
>> >> +# Arguments:
>> >> +#	$1 - the pid of the process to wait and check.
>> >> +#	$2 - 1 if expecting success, 0 for failure.
>> >> +#
>> >> +# Return:
>> >> +#	0 if the exit status of the process matches the expectation.
>> >> +#	1 otherwise.
>> >> +wait_check_process_status() {
>> >> +    pid=$1
>> >> +    check_for_success=$2
>> >> +
>> >> +    wait "$pid"
>> >> +    status=$?
>> >> +
>> >> +    if [ $check_for_success -eq $PROCESS_SUCCESS ] && [ $status -eq  
>> 0
>> >> ]; then
>> >> +        echo "# Process $pid succeeded."
>> >> +        return 0
>> >> +    elif [ $check_for_success -eq $PROCESS_FAILURE ] && [ $status  
>> -ne
>> >> 0 ]; then
>> >> +        echo "# Process $pid returned failure."
>> >> +        return 0
>> >> +    fi
>> >> +    return 1
>> >> +}
>> >> +
>> >> +# Wait for a set of processes and check for expected exit status
>> >> +#
>> >> +# Arguments:
>> >> +#	$1 - 1 if expecting success, 0 for failure.
>> >> +#	remaining args - The pids of the processes
>> >> +#
>> >> +# Return:
>> >> +#	0 if exit status of any process matches the expectation.
>> >> +#	1 otherwise.
>> >> +wait_and_detect_for_any() {
>> >> +    check_for_success=$1
>> >> +
>> >> +    shift
>> >> +    detected=1 # 0 for success detection
>> >> +
>> >> +    for pid in $@; do
>> >> +        if wait_check_process_status "$pid" "$check_for_success";  
>> then
>> >> +            detected=0
>> >> +            # Wait for other processes to exit
>> >> +        fi
>> >> +    done
>> >> +
>> >> +    return $detected
>> >> +}
>> >> +
>> >> +echo "# Start unclobbered_vdso_oversubscribed with SMALL limit,
>> >> expecting failure..."
>> >> +# Always use leaf node of misc cgroups
>> >> +# these may fail on OOM
>> >> +./ash_cgexec.sh $TEST_CG_SUB3 $test_cmd >cgtest_small_$timestamp.log
>> >> 2>&1
>> >> +if [ $? -eq 0 ]; then
>> >> +    echo "# Fail on SMALL limit, not expecting any test passes."
>> >> +    clean_up
>> >> +    exit 1
>> >> +else
>> >> +    echo "# Test failed as expected."
>> >> +fi
>> >> +
>> >> +echo "# PASSED SMALL limit."
>> >> +
>> >> +echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests  
>> with
>> >> LARGE limit,
>> >> +        expecting at least one success...."
>> >> +
>> >> +pids=""
>> >> +for i in 1 2 3 4; do
>> >> +    (
>> >> +        ./ash_cgexec.sh $TEST_CG_SUB2 $test_cmd
>> >> >cgtest_large_positive_$timestamp.$i.log 2>&1
>> >> +    ) &
>> >> +    pids="$pids $!"
>> >> +done
>> >> +
>> >> +
>> >> +if wait_and_detect_for_any $PROCESS_SUCCESS "$pids"; then
>> >> +    echo "# PASSED LARGE limit positive testing."
>> >> +else
>> >> +    echo "# Failed on LARGE limit positive testing, no test passes."
>> >> +    clean_up
>> >> +    exit 1
>> >> +fi
>> >> +
>> >> +echo "# Start 5 concurrent unclobbered_vdso_oversubscribed tests  
>> with
>> >> LARGE limit,
>> >> +        expecting at least one failure...."
>> >> +pids=""
>> >> +for i in 1 2 3 4 5; do
>> >> +    (
>> >> +        ./ash_cgexec.sh $TEST_CG_SUB2 $test_cmd
>> >> >cgtest_large_negative_$timestamp.$i.log 2>&1
>> >> +    ) &
>> >> +    pids="$pids $!"
>> >> +done
>> >> +
>> >> +if wait_and_detect_for_any $PROCESS_FAILURE "$pids"; then
>> >> +    echo "# PASSED LARGE limit negative testing."
>> >> +else
>> >> +    echo "# Failed on LARGE limit negative testing, no test fails."
>> >> +    clean_up
>> >> +    exit 1
>> >> +fi
>> >> +
>> >> +echo "# Start 8 concurrent unclobbered_vdso_oversubscribed tests  
>> with
>> >> LARGER limit,
>> >> +        expecting no failure...."
>> >> +pids=""
>> >> +for i in 1 2 3 4 5 6 7 8; do
>> >> +    (
>> >> +        ./ash_cgexec.sh $TEST_CG_SUB4 $test_cmd
>> >> >cgtest_larger_$timestamp.$i.log 2>&1
>> >> +    ) &
>> >> +    pids="$pids $!"
>> >> +done
>> >> +
>> >> +if wait_and_detect_for_any $PROCESS_FAILURE "$pids"; then
>> >> +    echo "# Failed on LARGER limit, at least one test fails."
>> >> +    clean_up
>> >> +    exit 1
>> >> +else
>> >> +    echo "# PASSED LARGER limit tests."
>> >> +fi
>> >> +
>> >> +echo "# Start 8 concurrent unclobbered_vdso_oversubscribed tests  
>> with
>> >> LARGER limit,
>> >> +      randomly kill one, expecting no failure...."
>> >> +pids=""
>> >> +for i in 1 2 3 4 5 6 7 8; do
>> >> +    (
>> >> +        ./ash_cgexec.sh $TEST_CG_SUB4 $test_cmd
>> >> >cgtest_larger_kill_$timestamp.$i.log 2>&1
>> >> +    ) &
>> >> +    pids="$pids $!"
>> >> +done
>> >> +random_number=$(awk 'BEGIN{srand();print int(rand()*5)}')
>> >> +sleep $((random_number + 1))
>> >> +
>> >> +# Randomly select a process to kill
>> >> +# Make sure usage counter not leaked at the end.
>> >> +RANDOM_INDEX=$(awk 'BEGIN{srand();print int(rand()*8)}')
>> >> +counter=0
>> >> +for pid in $pids; do
>> >> +    if [ "$counter" -eq "$RANDOM_INDEX" ]; then
>> >> +        PID_TO_KILL=$pid
>> >> +        break
>> >> +    fi
>> >> +    counter=$((counter + 1))
>> >> +done
>> >> +
>> >> +kill $PID_TO_KILL
>> >> +echo "# Killed process with PID: $PID_TO_KILL"
>> >> +
>> >> +any_failure=0
>> >> +for pid in $pids; do
>> >> +    wait "$pid"
>> >> +    status=$?
>> >> +    if [ "$pid" != "$PID_TO_KILL" ]; then
>> >> +        if [ $status -ne 0 ]; then
>> >> +	    echo "# Process $pid returned failure."
>> >> +            any_failure=1
>> >> +        fi
>> >> +    fi
>> >> +done
>> >> +
>> >> +if [ $any_failure -ne 0 ]; then
>> >> +    echo "# Failed on random killing, at least one test fails."
>> >> +    clean_up
>> >> +    exit 1
>> >> +fi
>> >> +echo "# PASSED LARGER limit test with a process randomly killed."
>> >> +
>> >> +MEM_LIMIT_TOO_SMALL=$((CAPACITY - 2 * LARGE))
>> >> +
>> >> +echo "$MEM_LIMIT_TOO_SMALL" > $CG_ROOT/$TEST_CG_SUB2/memory.max
>> >> +if [ $? -ne 0 ]; then
>> >> +    echo "# Failed creating memory controller."
>> >> +    clean_up
>> >> +    exit 1
>> >> +fi
>> >> +
>> >> +echo "# Start 4 concurrent unclobbered_vdso_oversubscribed tests  
>> with
>> >> LARGE EPC limit,
>> >> +        and too small RAM limit, expecting all failures...."
>> >> +# Ensure swapping off so the OOM killer is activated when mem_cgroup
>> >> limit is hit.
>> >> +swapoff -a
>> >> +pids=""
>> >> +for i in 1 2 3 4; do
>> >> +    (
>> >> +        ./ash_cgexec.sh $TEST_CG_SUB2 $test_cmd
>> >> >cgtest_large_oom_$timestamp.$i.log 2>&1
>> >> +    ) &
>> >> +    pids="$pids $!"
>> >> +done
>> >> +
>> >> +if wait_and_detect_for_any $PROCESS_SUCCESS "$pids"; then
>> >> +    echo "# Failed on tests with memcontrol, some tests did not  
>> fail."
>> >> +    clean_up
>> >> +    swapon -a
>> >> +    exit 1
>> >> +else
>> >> +    swapon -a
>> >> +    echo "# PASSED LARGE limit tests with memcontrol."
>> >> +fi
>> >> +
>> >> +sleep 2
>> >> +
>> >> +USAGE=$(grep '^sgx_epc' "$CG_ROOT/$TEST_ROOT_CG/misc.current" | awk
>> >> '{print $2}')
>> >> +if [ "$USAGE" -ne 0 ]; then
>> >> +    echo "# Failed: Final usage is $USAGE, not 0."
>> >> +else
>> >> +    echo "# PASSED leakage check."
>> >> +    echo "# PASSED ALL cgroup limit tests, cleanup cgroups..."
>> >> +fi
>> >> +clean_up
>> >> +echo "# done."
>> >> diff --git a/tools/testing/selftests/sgx/watch_misc_for_tests.sh
>> >> b/tools/testing/selftests/sgx/watch_misc_for_tests.sh
>> >> new file mode 100755
>> >> index 000000000000..1c9985726ace
>> >> --- /dev/null
>> >> +++ b/tools/testing/selftests/sgx/watch_misc_for_tests.sh
>> >> @@ -0,0 +1,11 @@
>> >> +#!/usr/bin/env sh
>> >> +# SPDX-License-Identifier: GPL-2.0
>> >> +# Copyright(c) 2023, 2024 Intel Corporation.
>> >> +
>> >> +if [ -z "$1" ]; then
>> >> +    echo "No argument supplied, please provide 'max', 'current', or
>> >> 'events'"
>> >> +    exit 1
>> >> +fi
>> >> +
>> >> +watch -n 1 'find /sys/fs/cgroup -wholename "*/test*/misc.'$1'"  
>> -exec \
>> >> +    sh -c '\''echo "$1:"; cat "$1"'\'' _ {} \;'
>> >
>> > So this is what happens now:
>> >
>> > jarkko@mustatorvisieni:~/linux-tpmdd> make -C
>> > tools/testing/selftests/sgx run_tests
>> > make: Entering directory
>> > '/home/jarkko/linux-tpmdd/tools/testing/selftests/sgx'
>> > TAP version 13
>> > 1..1
>> > # timeout set to 45
>> > # selftests: sgx: test_sgx
>> > # TAP version 13
>> > # 1..16
>> > # # Starting 16 tests from 1 test cases.
>> > # #  RUN           enclave.unclobbered_vdso ...
>> > # #            OK  enclave.unclobbered_vdso
>> > # ok 1 enclave.unclobbered_vdso
>> > # #  RUN           enclave.unclobbered_vdso_oversubscribed ...
>> > # #            OK  enclave.unclobbered_vdso_oversubscribed
>> > # ok 2 enclave.unclobbered_vdso_oversubscribed
>> > # #  RUN           enclave.unclobbered_vdso_oversubscribed_remove ...
>> > # # main.c:402:unclobbered_vdso_oversubscribed_remove:Creating an
>> > enclave with 98566144 bytes heap may take a while ...
>> > # # main.c:457:unclobbered_vdso_oversubscribed_remove:Changing type of
>> > 98566144 bytes to trimmed may take a while ...
>> > # # main.c:473:unclobbered_vdso_oversubscribed_remove:Entering enclave
>> > to run EACCEPT for each page of 98566144 bytes may take a while ...
>> > # # main.c:494:unclobbered_vdso_oversubscribed_remove:Removing  
>> 98566144
>> > bytes from enclave may take a while ...
>> > # #            OK  enclave.unclobbered_vdso_oversubscribed_remove
>> > # ok 3 enclave.unclobbered_vdso_oversubscribed_remove
>> > # #  RUN           enclave.clobbered_vdso ...
>> > # #            OK  enclave.clobbered_vdso
>> > # ok 4 enclave.clobbered_vdso
>> > # #  RUN           enclave.clobbered_vdso_and_user_function ...
>> > # #            OK  enclave.clobbered_vdso_and_user_function
>> > # ok 5 enclave.clobbered_vdso_and_user_function
>> > # #  RUN           enclave.tcs_entry ...
>> > # #            OK  enclave.tcs_entry
>> > # ok 6 enclave.tcs_entry
>> > # #  RUN           enclave.pte_permissions ...
>> > # #            OK  enclave.pte_permissions
>> > # ok 7 enclave.pte_permissions
>> > # #  RUN           enclave.tcs_permissions ...
>> > # #            OK  enclave.tcs_permissions
>> > # ok 8 enclave.tcs_permissions
>> > # #  RUN           enclave.epcm_permissions ...
>> > # #            OK  enclave.epcm_permissions
>> > # ok 9 enclave.epcm_permissions
>> > # #  RUN           enclave.augment ...
>> > # #            OK  enclave.augment
>> > # ok 10 enclave.augment
>> > # #  RUN           enclave.augment_via_eaccept ...
>> > # #            OK  enclave.augment_via_eaccept
>> > # ok 11 enclave.augment_via_eaccept
>> > # #  RUN           enclave.tcs_create ...
>> > # #            OK  enclave.tcs_create
>> > # ok 12 enclave.tcs_create
>> > # #  RUN           enclave.remove_added_page_no_eaccept ...
>> > # #            OK  enclave.remove_added_page_no_eaccept
>> > # ok 13 enclave.remove_added_page_no_eaccept
>> > # #  RUN           enclave.remove_added_page_invalid_access ...
>> > # #            OK  enclave.remove_added_page_invalid_access
>> > # ok 14 enclave.remove_added_page_invalid_access
>> > # #  RUN
>> > enclave.remove_added_page_invalid_access_after_eaccept ...
>> > # #            OK   
>> enclave.remove_added_page_invalid_access_after_eaccept
>> > # ok 15 enclave.remove_added_page_invalid_access_after_eaccept
>> > # #  RUN           enclave.remove_untouched_page ...
>> > # #            OK  enclave.remove_untouched_page
>> > # ok 16 enclave.remove_untouched_page
>> > # # PASSED: 16 / 16 tests passed.
>> > # # Totals: pass:16 fail:0 xfail:0 xpass:0 skip:0 error:0
>> > ok 1 selftests: sgx: test_sgx
>> >
>> > Also cgroups tests are expected to run when invoking "run_tests".
>> >
>> I can add the SGX cgroup tests to the "run_tests" target. But it will  
>> need
>> more than the 45secs given by the default timeout especially on  
>> platforms
>> with larger EPC. You will need run with --override-timeout
>> (current SGX selftests also timeout for default 45 sec on a server with  
>> 4G
>> EPC).
>>
>>
>> > I also wonder do we really want this:
>> >
>> > diff --git a/config/x86_64/default b/config/x86_64/default
>> > index 246b1f3df46..6c3d20af7b4 100644
>> > --- a/config/x86_64/default
>> > +++ b/config/x86_64/default
>> > @@ -502,6 +502,7 @@ CONFIG_X86_INTEL_TSX_MODE_OFF=y
>> >  # CONFIG_X86_INTEL_TSX_MODE_ON is not set
>> >  # CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
>> >  CONFIG_X86_SGX=y
>> > +CONFIG_CGROUP_SGX_EPC=y
>> >  # CONFIG_X86_USER_SHADOW_STACK is not set
>> >  CONFIG_EFI=y
>> >  CONFIG_EFI_STUB=y
>> >
>> > It is a small change but affects all of downstream, not just OpenSUSE.
>> >
>> > I hard time projecting a situation where you wanted SGX but without
>> > cgroups support so perhaps it would be a better idea to enable cgroups
>> > unconditionally when SGX and cgroups are part of the kernel config?
>> >
>> > Then downstream can just pick the patches and call it a day...
>> >
>> > BR, Jarkko
>> >
>>
>> I don't have issue to remove this config and conditionally compile in  
>> SGX
>> cgroup implementation when MISC is configured.
>
> I did run the basic test by manually creating the cgroup so you could
> add tested-by from my side to the other kernel patches expect this one
> :-)

Thanks
>
> I've reviewed it enough rounds and given various code suggestions etc.
> For me it is "good enough" or has been for a while. I just want this
> test to work so that people doing kernel QA will automatically get it
> to their testing cycle. That is why proper integration to kselftest
> framework is a must.
>
> BR, Jarkko
>
Sounds good. I have added integration now on tip of the staging/plus  
branch: https://github.com/haitaohuang/linux/tree/sgx_cg_upstream_v11_plus
Will send v12 with those and with the change to remove CGROUP_SGX_EPC  
config.

Thanks
Haitao