Received-SPF: pass (google.com: domain of linux-kernel+bounces-151429-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
From: Konstantin Pugin <rilian.la.te@ya.ru>
To: 
Cc: Konstantin Pugin <ria.freelander@gmail.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>,
	Hugo Villeneuve <hvilleneuve@dimonoff.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Lech Perczak <lech.perczak@camlingroup.com>,
	=?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@linux.intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	linux-kernel@vger.kernel.org,
	linux-serial@vger.kernel.org
Subject: [PATCH v4 1/3] serial: sc16is7xx: announce support of SER_RS485_RTS_ON_SEND
Date: Fri, 19 Apr 2024 15:45:01 +0300
Message-Id: <20240419124506.1531035-2-rilian.la.te@ya.ru>
In-Reply-To: <20240419124506.1531035-1-rilian.la.te@ya.ru>
References: <20240419124506.1531035-1-rilian.la.te@ya.ru>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Konstantin Pugin <ria.freelander@gmail.com>

The hardware supports both RTS_ON_SEND and RTS_AFTER_SEND modes, but
after the commit 4afeced55baa ("serial: core: fix sanitizing check for
RTS settings") we always end up with SER_RS485_RTS_AFTER_SEND set and
always write to the register field SC16IS7XX_EFCR_RTS_INVERT_BIT, which
breaks some hardware using these chips.

Fixes: 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported")
Signed-off-by: Konstantin Pugin <ria.freelander@gmail.com>
---
 drivers/tty/serial/sc16is7xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 03cf30e20b75..dfcc804f558f 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1449,7 +1449,7 @@ static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
 }
 
 static const struct serial_rs485 sc16is7xx_rs485_supported = {
-	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
 	.delay_rts_before_send = 1,
 	.delay_rts_after_send = 1,	/* Not supported but keep returning -EINVAL */
 };
-- 
2.34.1