Received-SPF: pass (google.com: domain of linux-kernel+bounces-156924-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
Message-ID: <7ed5e8cf-2bcc-4d4c-a1dc-17592b5909c0@ideasonboard.com>
Date: Wed, 24 Apr 2024 16:05:31 +0300
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [PATCH v5 09/10] media: subdev: Support single-stream case in
 v4l2_subdev_enable/disable_streams()
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
 Hans Verkuil <hverkuil@xs4all.nl>,
 Sakari Ailus <sakari.ailus@linux.intel.com>,
 Umang Jain <umang.jain@ideasonboard.com>, linux-media@vger.kernel.org,
 linux-kernel@vger.kernel.org
References: <20240416-enable-streams-impro-v5-0-bd5fcea49388@ideasonboard.com>
 <20240416-enable-streams-impro-v5-9-bd5fcea49388@ideasonboard.com>
 <20240419153603.GE12651@pendragon.ideasonboard.com>
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Content-Language: en-US
Autocrypt: addr=tomi.valkeinen@ideasonboard.com; keydata=
 xsFNBE6ms0cBEACyizowecZqXfMZtnBniOieTuFdErHAUyxVgtmr0f5ZfIi9Z4l+uUN4Zdw2
 wCEZjx3o0Z34diXBaMRJ3rAk9yB90UJAnLtb8A97Oq64DskLF81GCYB2P1i0qrG7UjpASgCA
 Ru0lVvxsWyIwSfoYoLrazbT1wkWRs8YBkkXQFfL7Mn3ZMoGPcpfwYH9O7bV1NslbmyJzRCMO
 eYV258gjCcwYlrkyIratlHCek4GrwV8Z9NQcjD5iLzrONjfafrWPwj6yn2RlL0mQEwt1lOvn
 LnI7QRtB3zxA3yB+FLsT1hx0va6xCHpX3QO2gBsyHCyVafFMrg3c/7IIWkDLngJxFgz6DLiA
 G4ld1QK/jsYqfP2GIMH1mFdjY+iagG4DqOsjip479HCWAptpNxSOCL6z3qxCU8MCz8iNOtZk
 DYXQWVscM5qgYSn+fmMM2qN+eoWlnCGVURZZLDjg387S2E1jT/dNTOsM/IqQj+ZROUZuRcF7
 0RTtuU5q1HnbRNwy+23xeoSGuwmLQ2UsUk7Q5CnrjYfiPo3wHze8avK95JBoSd+WIRmV3uoO
 rXCoYOIRlDhg9XJTrbnQ3Ot5zOa0Y9c4IpyAlut6mDtxtKXr4+8OzjSVFww7tIwadTK3wDQv
 Bus4jxHjS6dz1g2ypT65qnHen6mUUH63lhzewqO9peAHJ0SLrQARAQABzTBUb21pIFZhbGtl
 aW5lbiA8dG9taS52YWxrZWluZW5AaWRlYXNvbmJvYXJkLmNvbT7CwY4EEwEIADgWIQTEOAw+
 ll79gQef86f6PaqMvJYe9QUCX/HruAIbAwULCQgHAgYVCgkICwIEFgIDAQIeAQIXgAAKCRD6
 PaqMvJYe9WmFD/99NGoD5lBJhlFDHMZvO+Op8vCwnIRZdTsyrtGl72rVh9xRfcSgYPZUvBuT
 VDxE53mY9HaZyu1eGMccYRBaTLJSfCXl/g317CrMNdY0k40b9YeIX10feiRYEWoDIPQ3tMmA
 0nHDygzcnuPiPT68JYZ6tUOvAt7r6OX/litM+m2/E9mtp8xCoWOo/kYO4mOAIoMNvLB8vufi
 uBB4e/AvAjtny4ScuNV5c5q8MkfNIiOyag9QCiQ/JfoAqzXRjVb4VZG72AKaElwipiKCWEcU
 R4+Bu5Qbaxj7Cd36M/bI54OrbWWETJkVVSV1i0tghCd6HHyquTdFl7wYcz6cL1hn/6byVnD+
 sR3BLvSBHYp8WSwv0TCuf6tLiNgHAO1hWiQ1pOoXyMEsxZlgPXT+wb4dbNVunckwqFjGxRbl
 Rz7apFT/ZRwbazEzEzNyrBOfB55xdipG/2+SmFn0oMFqFOBEszXLQVslh64lI0CMJm2OYYe3
 PxHqYaztyeXsx13Bfnq9+bUynAQ4uW1P5DJ3OIRZWKmbQd/Me3Fq6TU57LsvwRgE0Le9PFQs
 dcP2071rMTpqTUteEgODJS4VDf4lXJfY91u32BJkiqM7/62Cqatcz5UWWHq5xeF03MIUTqdE
 qHWk3RJEoWHWQRzQfcx6Fn2fDAUKhAddvoopfcjAHfpAWJ+ENc7BTQROprNHARAAx0aat8GU
 hsusCLc4MIxOQwidecCTRc9Dz/7U2goUwhw2O5j9TPqLtp57VITmHILnvZf6q3QAho2QMQyE
 DDvHubrdtEoqaaSKxKkFie1uhWNNvXPhwkKLYieyL9m2JdU+b88HaDnpzdyTTR4uH7wk0bBa
 KbTSgIFDDe5lXInypewPO30TmYNkFSexnnM3n1PBCqiJXsJahE4ZQ+WnV5FbPUj8T2zXS2xk
 0LZ0+DwKmZ0ZDovvdEWRWrz3UzJ8DLHb7blPpGhmqj3ANXQXC7mb9qJ6J/VSl61GbxIO2Dwb
 xPNkHk8fwnxlUBCOyBti/uD2uSTgKHNdabhVm2dgFNVuS1y3bBHbI/qjC3J7rWE0WiaHWEqy
 UVPk8rsph4rqITsj2RiY70vEW0SKePrChvET7D8P1UPqmveBNNtSS7In+DdZ5kUqLV7rJnM9
 /4cwy+uZUt8cuCZlcA5u8IsBCNJudxEqBG10GHg1B6h1RZIz9Q9XfiBdaqa5+CjyFs8ua01c
 9HmyfkuhXG2OLjfQuK+Ygd56mV3lq0aFdwbaX16DG22c6flkkBSjyWXYepFtHz9KsBS0DaZb
 4IkLmZwEXpZcIOQjQ71fqlpiXkXSIaQ6YMEs8WjBbpP81h7QxWIfWtp+VnwNGc6nq5IQDESH
 mvQcsFS7d3eGVI6eyjCFdcAO8eMAEQEAAcLBXwQYAQIACQUCTqazRwIbDAAKCRD6PaqMvJYe
 9fA7EACS6exUedsBKmt4pT7nqXBcRsqm6YzT6DeCM8PWMTeaVGHiR4TnNFiT3otD5UpYQI7S
 suYxoTdHrrrBzdlKe5rUWpzoZkVK6p0s9OIvGzLT0lrb0HC9iNDWT3JgpYDnk4Z2mFi6tTbq
 xKMtpVFRA6FjviGDRsfkfoURZI51nf2RSAk/A8BEDDZ7lgJHskYoklSpwyrXhkp9FHGMaYII
 m9EKuUTX9JPDG2FTthCBrdsgWYPdJQvM+zscq09vFMQ9Fykbx5N8z/oFEUy3ACyPqW2oyfvU
 CH5WDpWBG0s5BALp1gBJPytIAd/pY/5ZdNoi0Cx3+Z7jaBFEyYJdWy1hGddpkgnMjyOfLI7B
 CFrdecTZbR5upjNSDvQ7RG85SnpYJTIin+SAUazAeA2nS6gTZzumgtdw8XmVXZwdBfF+ICof
 92UkbYcYNbzWO/GHgsNT1WnM4sa9lwCSWH8Fw1o/3bX1VVPEsnESOfxkNdu+gAF5S6+I6n3a
 ueeIlwJl5CpT5l8RpoZXEOVtXYn8zzOJ7oGZYINRV9Pf8qKGLf3Dft7zKBP832I3PQjeok7F
 yjt+9S+KgSFSHP3Pa4E7lsSdWhSlHYNdG/czhoUkSCN09C0rEK93wxACx3vtxPLjXu6RptBw
 3dRq7n+mQChEB1am0BueV1JZaBboIL0AGlSJkm23kw==
In-Reply-To: <20240419153603.GE12651@pendragon.ideasonboard.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

On 19/04/2024 18:36, Laurent Pinchart wrote:
> Hi Tomi,
> 
> Thank you for the patch.
> 
> On Tue, Apr 16, 2024 at 04:55:12PM +0300, Tomi Valkeinen wrote:
>> At the moment the v4l2_subdev_enable/disable_streams() functions call
>> fallback helpers to handle the case where the subdev only implements
>> .s_stream(), and the main function handles the case where the subdev
>> implements streams (V4L2_SUBDEV_FL_STREAMS, which implies
>> .enable/disable_streams()).
>>
>> What is missing is support for subdevs which do not implement streams
>> support, but do implement .enable/disable_streams(). Example cases of
>> these subdevices are single-stream cameras, where using
>> .enable/disable_streams() is not required but helps us remove the users
>> of the legacy .s_stream(), and subdevices with multiple source pads (but
>> single stream per pad), where .enable/disable_streams() allows the
>> subdevice to control the enable/disable state per pad.
>>
>> The two single-streams cases (.s_stream() and .enable/disable_streams())
>> are very similar, and with small changes we can change the
>> v4l2_subdev_enable/disable_streams() functions to support all three
>> cases, without needing separate fallback functions.
>>
>> A few potentially problematic details, though:
>>
>> - For the single-streams cases we use sd->enabled_pads field, which
>>    limits the number of pads for the subdevice to 64. For simplicity I
>>    added the check for this limitation to the beginning of the function,
>>    and it also applies to the streams case.
>>
>> - The fallback functions only allowed the target pad to be a source pad.
>>    It is not very clear to me why this check was needed, but it was not
>>    needed in the streams case. However, I doubt the
>>    v4l2_subdev_enable/disable_streams() code has ever been tested with
>>    sink pads, so to be on the safe side, I added the same check
>>    to the v4l2_subdev_enable/disable_streams() functions.
>>
> 
> Now that v4l2_subdev_enable_streams() is usable by (almost) every
> driver, should we update documentation to indicate that manual calls to
> .s_stream() should be avoided ?

How about:

diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h
index dabe1b5dfe4a..f52bb790773c 100644
--- a/include/media/v4l2-subdev.h
+++ b/include/media/v4l2-subdev.h
@@ -450,6 +450,11 @@ enum v4l2_subdev_pre_streamon_flags {
   *     already started or stopped subdev. Also see call_s_stream 
wrapper in
   *     v4l2-subdev.c.
   *
+ *     New drivers should instead implement 
&v4l2_subdev_pad_ops.enable_streams
+ *     and &v4l2_subdev_pad_ops.disable_streams operations, and use
+ *     v4l2_subdev_s_stream_helper for the &v4l2_subdev_video_ops.s_stream
+ *     operation to support legacy users.
+ *
   * @g_pixelaspect: callback to return the pixelaspect ratio.
   *
   * @s_dv_timings: Set custom dv timings in the sub device. This is used


Although now that I think about it, can we "ever" get rid of s_stream? 
enable_streams is only usable if the subdev has pads. If that's the 
case, the text above should probably clarify when one should continue 
using s_stream.

>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>> ---
>>   drivers/media/v4l2-core/v4l2-subdev.c | 187 ++++++++++++++--------------------
>>   1 file changed, 79 insertions(+), 108 deletions(-)
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c
>> index e45fd42da1e3..10406acfb9d0 100644
>> --- a/drivers/media/v4l2-core/v4l2-subdev.c
>> +++ b/drivers/media/v4l2-core/v4l2-subdev.c
>> @@ -2106,6 +2106,13 @@ static void v4l2_subdev_collect_streams(struct v4l2_subdev *sd,
>>   					u64 *found_streams,
>>   					u64 *enabled_streams)
>>   {
>> +	if (!(sd->flags & V4L2_SUBDEV_FL_STREAMS)) {
>> +		*found_streams = BIT_ULL(0);
>> +		*enabled_streams =
>> +			(sd->enabled_pads & BIT_ULL(pad)) ? BIT_ULL(0) : 0;
>> +		return;
>> +	}
>> +
>>   	*found_streams = 0;
>>   	*enabled_streams = 0;
>>   
>> @@ -2127,6 +2134,14 @@ static void v4l2_subdev_set_streams_enabled(struct v4l2_subdev *sd,
>>   					    u32 pad, u64 streams_mask,
>>   					    bool enabled)
>>   {
>> +	if (!(sd->flags & V4L2_SUBDEV_FL_STREAMS)) {
>> +		if (enabled)
>> +			sd->enabled_pads |= BIT_ULL(pad);
>> +		else
>> +			sd->enabled_pads &= ~BIT_ULL(pad);
>> +		return;
>> +	}
>> +
>>   	for (unsigned int i = 0; i < state->stream_configs.num_configs; ++i) {
>>   		struct v4l2_subdev_stream_config *cfg =
>>   			&state->stream_configs.configs[i];
>> @@ -2136,51 +2151,6 @@ static void v4l2_subdev_set_streams_enabled(struct v4l2_subdev *sd,
>>   	}
>>   }
>>   
>> -static int v4l2_subdev_enable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
>> -					       u64 streams_mask)
>> -{
>> -	struct device *dev = sd->entity.graph_obj.mdev->dev;
>> -	int ret;
>> -
>> -	/*
>> -	 * The subdev doesn't implement pad-based stream enable, fall back
>> -	 * to the .s_stream() operation.
>> -	 */
>> -	if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
>> -		return -EOPNOTSUPP;
>> -
>> -	/*
>> -	 * .s_stream() means there is no streams support, so the only allowed
>> -	 * stream is the implicit stream 0.
>> -	 */
>> -	if (streams_mask != BIT_ULL(0))
>> -		return -EOPNOTSUPP;
>> -
>> -	/*
>> -	 * We use a 64-bit bitmask for tracking enabled pads, so only subdevices
>> -	 * with 64 pads or less can be supported.
>> -	 */
>> -	if (pad >= sizeof(sd->enabled_pads) * BITS_PER_BYTE)
>> -		return -EOPNOTSUPP;
>> -
>> -	if (sd->enabled_pads & BIT_ULL(pad)) {
>> -		dev_dbg(dev, "pad %u already enabled on %s\n",
>> -			pad, sd->entity.name);
>> -		return -EALREADY;
>> -	}
>> -
>> -	/* Start streaming when the first pad is enabled. */
>> -	if (!sd->enabled_pads) {
>> -		ret = v4l2_subdev_call(sd, video, s_stream, 1);
>> -		if (ret)
>> -			return ret;
>> -	}
>> -
>> -	sd->enabled_pads |= BIT_ULL(pad);
>> -
>> -	return 0;
>> -}
>> -
>>   int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
>>   			       u64 streams_mask)
>>   {
>> @@ -2189,21 +2159,33 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
>>   	bool already_streaming;
>>   	u64 enabled_streams;
>>   	u64 found_streams;
>> +	bool use_s_stream;
>>   	int ret;
>>   
>>   	/* A few basic sanity checks first. */
>>   	if (pad >= sd->entity.num_pads)
>>   		return -EINVAL;
>>   
>> +	if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
>> +		return -EOPNOTSUPP;
>> +
>> +	/*
>> +	 * We use a 64-bit bitmask for tracking enabled pads, so only subdevices
>> +	 * with 64 pads or less can be supported.
>> +	 */
>> +	if (pad >= sizeof(sd->enabled_pads) * BITS_PER_BYTE)
>> +		return -EOPNOTSUPP;
>> +
>>   	if (!streams_mask)
>>   		return 0;
>>   
>>   	/* Fallback on .s_stream() if .enable_streams() isn't available. */
>> -	if (!v4l2_subdev_has_op(sd, pad, enable_streams))
>> -		return v4l2_subdev_enable_streams_fallback(sd, pad,
>> -							   streams_mask);
>> +	use_s_stream = !v4l2_subdev_has_op(sd, pad, enable_streams);
>>   
>> -	state = v4l2_subdev_lock_and_get_active_state(sd);
>> +	if (!use_s_stream)
>> +		state = v4l2_subdev_lock_and_get_active_state(sd);
>> +	else
>> +		state = NULL;
>>   
>>   	/*
>>   	 * Verify that the requested streams exist and that they are not
>> @@ -2231,9 +2213,18 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
>>   
>>   	already_streaming = v4l2_subdev_is_streaming(sd);
>>   
>> -	/* Call the .enable_streams() operation. */
>> -	ret = v4l2_subdev_call(sd, pad, enable_streams, state, pad,
>> -			       streams_mask);
>> +	if (!use_s_stream) {
>> +		/* Call the .enable_streams() operation. */
>> +		ret = v4l2_subdev_call(sd, pad, enable_streams, state, pad,
>> +				       streams_mask);
>> +	} else {
>> +		/* Start streaming when the first pad is enabled. */
>> +		if (!already_streaming)
>> +			ret = v4l2_subdev_call(sd, video, s_stream, 1);
>> +		else
>> +			ret = 0;
>> +	}
>> +
>>   	if (ret) {
>>   		dev_dbg(dev, "enable streams %u:%#llx failed: %d\n", pad,
>>   			streams_mask, ret);
>> @@ -2243,34 +2234,32 @@ int v4l2_subdev_enable_streams(struct v4l2_subdev *sd, u32 pad,
>>   	/* Mark the streams as enabled. */
>>   	v4l2_subdev_set_streams_enabled(sd, state, pad, streams_mask, true);
> 
> state gets set to a non-null value above if the subdev has an
> enable_streams operation, while in v4l2_subdev_set_streams_enabled(),

That's not quite true, v4l2_subdev_lock_and_get_active_state() returns 
NULL if there's no state. If the driver has .enable_streams but no 
subdev-state, we'll have NULL state. But is that a driver bug? Probably, 
although I'm not quite sure. Whereas V4L2_SUBDEV_FL_STREAMS without 
state is a driver bug.

> you use it if the V4L2_SUBDEV_FL_STREAMS flag is set. The second
> condition is a subset of the first one, so it should be safe now, but I
> wonder if we're at risk of crashes in the future when reworking the
> code. I'm probably worrying needlessly.

I agree that this is a bit messy. We have multiple different scenarios 
which we handle in the same functions, and it's somewhat unclear what 
op/state/flag combinations the drivers are allowed to have and what not.

I could add a !state check here, and then use sd->enabled_pads. But that 
doesn't feel correct, and I think it's just better to crash and then fix 
it if we end up there.

>>   
>> -	if (!already_streaming)
>> +	if (!use_s_stream && !already_streaming)
>>   		v4l2_subdev_enable_privacy_led(sd);
> 
> Once everybody switches to v4l2_subdev_enable_streams() (am I dreaming?)
> we should move LED handling from the .s_stream() wrapper to here for the
> fallback case too. How about a TODO comment ?

Let's get back to this after we figure out if s_stream can ever be removed.

>>   
>>   done:
>> -	v4l2_subdev_unlock_state(state);
>> +	if (!use_s_stream)
> 
> 	if (state)
> 
> would be better I think.

We get the state and state lock if (!use_s_stream), so I think it makes 
sense to use the same condition when unlocking to be symmetric. I'm sure 
I can be convinced to use if (state) too, though =).

  Tomi

>> +		v4l2_subdev_unlock_state(state);
>>   
>>   	return ret;
>>   }
>>   EXPORT_SYMBOL_GPL(v4l2_subdev_enable_streams);
>>   
>> -static int v4l2_subdev_disable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
>> -						u64 streams_mask)
>> +int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
>> +				u64 streams_mask)
>>   {
>>   	struct device *dev = sd->entity.graph_obj.mdev->dev;
>> +	struct v4l2_subdev_state *state;
>> +	u64 enabled_streams;
>> +	u64 found_streams;
>> +	bool use_s_stream;
>>   	int ret;
>>   
>> -	/*
>> -	 * If the subdev doesn't implement pad-based stream enable, fall back
>> -	 * to the .s_stream() operation.
>> -	 */
>> -	if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
>> -		return -EOPNOTSUPP;
>> +	/* A few basic sanity checks first. */
>> +	if (pad >= sd->entity.num_pads)
>> +		return -EINVAL;
>>   
>> -	/*
>> -	 * .s_stream() means there is no streams support, so the only allowed
>> -	 * stream is the implicit stream 0.
>> -	 */
>> -	if (streams_mask != BIT_ULL(0))
>> +	if (!(sd->entity.pads[pad].flags & MEDIA_PAD_FL_SOURCE))
>>   		return -EOPNOTSUPP;
>>   
>>   	/*
>> @@ -2280,46 +2269,16 @@ static int v4l2_subdev_disable_streams_fallback(struct v4l2_subdev *sd, u32 pad,
>>   	if (pad >= sizeof(sd->enabled_pads) * BITS_PER_BYTE)
>>   		return -EOPNOTSUPP;
>>   
>> -	if (!(sd->enabled_pads & BIT_ULL(pad))) {
>> -		dev_dbg(dev, "pad %u already disabled on %s\n",
>> -			pad, sd->entity.name);
>> -		return -EALREADY;
>> -	}
>> -
>> -	/* Stop streaming when the last streams are disabled. */
>> -	if (!(sd->enabled_pads & ~BIT_ULL(pad))) {
>> -		ret = v4l2_subdev_call(sd, video, s_stream, 0);
>> -		if (ret)
>> -			return ret;
>> -	}
>> -
>> -	sd->enabled_pads &= ~BIT_ULL(pad);
>> -
>> -	return 0;
>> -}
>> -
>> -int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
>> -				u64 streams_mask)
>> -{
>> -	struct device *dev = sd->entity.graph_obj.mdev->dev;
>> -	struct v4l2_subdev_state *state;
>> -	u64 enabled_streams;
>> -	u64 found_streams;
>> -	int ret;
>> -
>> -	/* A few basic sanity checks first. */
>> -	if (pad >= sd->entity.num_pads)
>> -		return -EINVAL;
>> -
>>   	if (!streams_mask)
>>   		return 0;
>>   
>>   	/* Fallback on .s_stream() if .disable_streams() isn't available. */
>> -	if (!v4l2_subdev_has_op(sd, pad, disable_streams))
>> -		return v4l2_subdev_disable_streams_fallback(sd, pad,
>> -							    streams_mask);
>> +	use_s_stream = !v4l2_subdev_has_op(sd, pad, disable_streams);
>>   
>> -	state = v4l2_subdev_lock_and_get_active_state(sd);
>> +	if (!use_s_stream)
>> +		state = v4l2_subdev_lock_and_get_active_state(sd);
>> +	else
>> +		state = NULL;
>>   
>>   	/*
>>   	 * Verify that the requested streams exist and that they are not
>> @@ -2345,9 +2304,19 @@ int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
>>   
>>   	dev_dbg(dev, "disable streams %u:%#llx\n", pad, streams_mask);
>>   
>> -	/* Call the .disable_streams() operation. */
>> -	ret = v4l2_subdev_call(sd, pad, disable_streams, state, pad,
>> -			       streams_mask);
>> +	if (!use_s_stream) {
>> +		/* Call the .disable_streams() operation. */
>> +		ret = v4l2_subdev_call(sd, pad, disable_streams, state, pad,
>> +				       streams_mask);
>> +	} else {
>> +		/* Stop streaming when the last streams are disabled. */
>> +
>> +		if (!(sd->enabled_pads & ~BIT_ULL(pad)))
>> +			ret = v4l2_subdev_call(sd, video, s_stream, 0);
>> +		else
>> +			ret = 0;
>> +	}
>> +
>>   	if (ret) {
>>   		dev_dbg(dev, "disable streams %u:%#llx failed: %d\n", pad,
>>   			streams_mask, ret);
>> @@ -2357,10 +2326,12 @@ int v4l2_subdev_disable_streams(struct v4l2_subdev *sd, u32 pad,
>>   	v4l2_subdev_set_streams_enabled(sd, state, pad, streams_mask, false);
>>   
>>   done:
>> -	if (!v4l2_subdev_is_streaming(sd))
>> -		v4l2_subdev_disable_privacy_led(sd);
>> +	if (!use_s_stream) {
>> +		if (!v4l2_subdev_is_streaming(sd))
>> +			v4l2_subdev_disable_privacy_led(sd);
> 
> Do we want to disable the privacy LED on failure in all cases, in
> particular when the .s_stream() or .disable_streams() operations are not
> even called ?
> 
> And now that I wrote that, I realize the !v4l2_subdev_is_streaming()
> condition will not be true if the operations failed, so it should be
> fine.
> 
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> 
>>   
>> -	v4l2_subdev_unlock_state(state);
>> +		v4l2_subdev_unlock_state(state);
>> +	}
>>   
>>   	return ret;
>>   }
>>
>