Received-SPF: pass (google.com: domain of linux-kernel+bounces-157333-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Luca Weiss <luca@z3ntu.xyz>
Subject: [PATCH 0/7] Use mboxes instead of syscon for APCS (arm32 & arm64)
Date: Wed, 24 Apr 2024 18:23:53 +0200
Message-Id: <20240424-apcs-mboxes-v1-0-6556c47cb501@z3ntu.xyz>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
To: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, 
 Bjorn Andersson <andersson@kernel.org>, 
 Mathieu Poirier <mathieu.poirier@linaro.org>, 
 Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh@kernel.org>, 
 Krzysztof Kozlowski <krzk+dt@kernel.org>, 
 Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org, 
 linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, 
 Luca Weiss <luca@z3ntu.xyz>

The first patch is for removing a bogus error warning I've noticed while
developing this on msm8226 - there the patches are also coming later for
this SoC since apcs is getting hooked up to cpufreq there also.

Apart from usages from the qcom,smsm driver (patches coming!) all other
usages of the apcs mailbox now go via the mailbox driver - where one is
used, so some arm32 boards will continue using "qcom,ipc*" properties in
the short or long term.

Only compile-tested apart from msm8953 (tested on sdm632-fairphone-fp3)
and msm8974 (tested on msm8974pro-fairphone-fp2), but I don't expect any
complications with this.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Luca Weiss (7):
      rpmsg: qcom_smd: Don't print error during probe deferral
      ARM: dts: qcom: msm8974: Use mboxes properties for APCS
      arm64: dts: qcom: msm8916: Use mboxes properties for APCS
      arm64: dts: qcom: msm8939: Use mboxes properties for APCS
      arm64: dts: qcom: msm8953: Use mboxes properties for APCS
      arm64: dts: qcom: msm8976: Use mboxes properties for APCS
      arm64: dts: qcom: msm8994: Use mboxes properties for APCS

 arch/arm/boot/dts/qcom/qcom-msm8974.dtsi | 14 +++++++-------
 arch/arm64/boot/dts/qcom/msm8916.dtsi    | 10 +++++-----
 arch/arm64/boot/dts/qcom/msm8939.dtsi    |  4 ++--
 arch/arm64/boot/dts/qcom/msm8953.dtsi    | 10 +++++-----
 arch/arm64/boot/dts/qcom/msm8976.dtsi    |  8 ++++----
 arch/arm64/boot/dts/qcom/msm8994.dtsi    |  6 +++---
 drivers/rpmsg/qcom_smd.c                 |  3 ++-
 7 files changed, 28 insertions(+), 27 deletions(-)
---
base-commit: 43173e6dbaa227f3107310d4df4a3bacd5e0df33
change-id: 20240423-apcs-mboxes-12ee6c01a5b3

Best regards,
-- 
Luca Weiss <luca@z3ntu.xyz>