Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761494AbYA1RAr (ORCPT ); Mon, 28 Jan 2008 12:00:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754827AbYA1RAg (ORCPT ); Mon, 28 Jan 2008 12:00:36 -0500 Received: from vms173001pub.verizon.net ([206.46.173.1]:49735 "EHLO vms173001pub.verizon.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753645AbYA1RAd (ORCPT ); Mon, 28 Jan 2008 12:00:33 -0500 Date: Mon, 28 Jan 2008 11:56:28 -0500 From: Gene Heskett Subject: Re: Problem with ata layer in 2.6.24 In-reply-to: <200801281135.14555.gene.heskett@gmail.com> To: Mikael Pettersson Cc: Peter Zijlstra , Linux Kernel Mailing List , Linux ide Mailing list Message-id: <200801281156.28844.gene.heskett@gmail.com> Organization: Organization? very little MIME-version: 1.0 Content-type: Multipart/Mixed; boundary="Boundary-00=_8kgnH7YqN15XXyY" References: <200801272122.21823.gene.heskett@gmail.com> <18333.57152.472830.608248@harpo.it.uu.se> <200801281135.14555.gene.heskett@gmail.com> User-Agent: KMail/1.9.6 (enterprise 0.20071204.744707) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 49754 Lines: 800 --Boundary-00=_8kgnH7YqN15XXyY Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline On Monday 28 January 2008, Gene Heskett wrote: While reading this msg as it came back, I locked up again and rebooted to 2.6.24, and got lucky (maybe) as the attached dmesg will show quite a few instances of this LOOOONNNGG before the nvidia driver is loaded to taint the kernel. Have fun guys! >On Monday 28 January 2008, Mikael Pettersson wrote: >>Gene Heskett writes: >> > On Monday 28 January 2008, Peter Zijlstra wrote: >> > >On Mon, 2008-01-28 at 09:17 +0100, Mikael Pettersson wrote: >> > >> 1. Wrong mailing list; use linux-ide (@vger) instead. >> > > >> > >What, and keep all us other interested people in the dark? >> > >> > As a test, I tried rebooting to the latest fedora kernel and found it >> > kills X, so I'm back to the second to last fedora version ATM, and the >> > third 'smartctl -t lng /dev/sda' in 24 hours is running now. The first >> > two completed with no errors. >> > >> > I've added the linux-ide list to refresh those people of the problem, >> > the logs are being spammed by this message stanza: >> > >> > Jan 28 04:46:25 coyote kernel: [26550.290016] ata1.00: exception Emask >> > 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jan 28 04:46:25 coyote kernel: >> > [26550.290028] ata1.00: cmd 35/00:58:c9:9c:0a/00:01:00:00:00/e0 tag 0 >> > dma 176128 out Jan 28 04:46:25 coyote kernel: [26550.290029] >> > res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jan 28 >> > 04:46:25 coyote kernel: [26550.290032] ata1.00: status: { DRDY } Jan 28 >> > 04:46:25 coyote kernel: [26550.290060] ata1: soft resetting link Jan 28 >> > 04:46:25 coyote kernel: [26550.452301] ata1.00: configured for UDMA/100 >> > Jan 28 04:46:25 coyote kernel: [26550.452318] ata1: EH complete >> > Jan 28 04:46:25 coyote kernel: [26550.455898] sd 0:0:0:0: [sda] >> > 390721968 512-byte hardware sectors (200050 MB) Jan 28 04:46:25 coyote >> > kernel: [26550.456151] sd 0:0:0:0: [sda] Write Protect is off Jan 28 >> > 04:46:25 coyote kernel: [26550.456403] sd 0:0:0:0: [sda] Write cache: >> > enabled, read cache: enabled, doesn't support DPO or FUA >> >>It's not obvious from this incomplete dmesg log what HW or driver >>is behind ata1, but if the 2.6.24-rc7 kernel matches the 2.6.24 one, >> >>it should be pata_amd driving a WDC disk: >> > [ 30.702887] pata_amd 0000:00:09.0: version 0.3.10 >> > [ 30.703052] PCI: Setting latency timer of device 0000:00:09.0 to 64 >> > [ 30.703188] scsi0 : pata_amd >> > [ 30.709313] scsi1 : pata_amd >> > [ 30.710076] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 >> > irq 14 [ 30.710079] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma >> > 0xf008 irq 15 [ 30.864753] ata1.00: ATA-6: WDC WD2000JB-00EVA0, >> > 15.05R15, max UDMA/100 [ 30.864756] ata1.00: 390721968 sectors, multi >> > 16: LBA48 >> > [ 30.871629] ata1.00: configured for UDMA/100 >> >>Unfortunately we also see: >> > [ 48.285456] nvidia: module license 'NVIDIA' taints kernel. >> > [ 48.549725] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI >> > 19 (level, high) -> IRQ 20 [ 48.550149] NVRM: loading NVIDIA UNIX x86 >> > Kernel Module 169.07 Thu Dec 13 18:42:56 PST 2007 >> >>We have no way of debugging that module, so please try 2.6.24 without it. > >Sorry, I can't do this and have a working machine. The nv driver has > suffered bit rot or something since the FC2 days when it COULD run a 19" > crt at 1600x1200, and will not drive this 20" wide screen lcd 1680x1050 > monitor at more than 800x600, which is absolutely butt ugly fuzzy, looking > like a jpg compressed to 10%. The system is not usable on a day to basis > without the nvidia driver. > >Fix the nv driver so it will run this screen at its native resolution and > I'll be glad to run it even if it won't run google earth, which I do use > from time to time. Now, if in all the hits you can get from google on > this, currently 14,800 just for 'exception Emask', apparently caused by a > timeout, if 100% of the complainers are running nvidia drivers also, then I > see a legit complaint. Again, fix the nv driver so it will run my screen & > I'll be glad to switch. I can see the reason, sure, but the machine must > be capable of doing its common day to day stuff, while using that driver, > like running kde for kmail, and browsers that work. > >>If the problems persist, please try to capture a complete log from the >>failing kernel -- the interesting bits are everything from initial boot >>up to and including the first few errors. You may need to increase the >>kernel's log buffer size if the log gets truncated (CONFIG_LOG_BUF_SHIFT). > >If by log you mean /var/log/messages, I have several megabytes of those. >If you mean a live dmesg capture taken right now, its attached. It contains >several of these at the bottom. I long ago made the kernel log buffer >bigger, cuz it couldn't even show the start immediately after the boot, and >even the dump to syslog was truncated. > >>There are no pata_amd changes from 2.6.24-rc7 to 2.6.24 final. > >That is what I was afraid of. I've done some limited grepping in that > branch of the kernel tree, and cannot seem to locate where this EH handler > is being invoked from. > >There is 2 lines of interest in the dmesg: > >[ 0.000000] Nvidia board detected. Ignoring ACPI timer override. >[ 0.000000] If you got timer trouble try acpi_use_timer_override > >But I have NDI what it means, kernel argument/xconfig option? > >I've also done some googling, and it appears this problem is fairly > widespread since the switchover to libata was encouraged. A stock fedora > F8 kernel suffers the same freezes and eventually locks up, but does it > without the error messages being logged, it just freezes, feeling identical > to this in the minutes before the total freeze. I've tried 2 of those too, > but the newest one won't even run X. -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Deprive a mirror of its silver and even the Czar won't see his face. --Boundary-00=_8kgnH7YqN15XXyY Content-Type: text/plain; charset="utf-8"; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg" [ 0.000000] Linux version 2.6.24 (root@coyote.coyote.den) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Jan 24 20:17:55 EST 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F7220, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 4CC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF7DC0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:10 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081 [ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] CPU 0 irqstacks, hard=c0743000 soft=c0723000 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2079.540 MHz processor. [ 24.833457] Console: colour VGA+ 80x25 [ 24.833460] console [tty0] enabled [ 24.834029] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 24.834561] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 24.865989] Memory: 1031080k/1048512k available (1951k kernel code, 16692k reserved, 986k data, 240k init, 131008k highmem) [ 24.865998] virtual kernel memory layout: [ 24.865999] fixmap : 0xffc55000 - 0xfffff000 (3752 kB) [ 24.866001] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 24.866002] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 24.866003] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 24.866004] .init : 0xc06e4000 - 0xc0720000 ( 240 kB) [ 24.866006] .data : 0xc05e7cd4 - 0xc06de6e4 ( 986 kB) [ 24.866007] .text : 0xc0400000 - 0xc05e7cd4 (1951 kB) [ 24.866010] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 24.866059] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 24.926020] Calibrating delay using timer specific routine.. 4160.90 BogoMIPS (lpj=2080453) [ 24.926053] Security Framework initialized [ 24.926059] SELinux: Initializing. [ 24.926072] SELinux: Starting in permissive mode [ 24.926086] selinux_register_security: Registering secondary module capability [ 24.926088] Capability LSM initialized as secondary [ 24.926098] Mount-cache hash table entries: 512 [ 24.926267] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000 [ 24.926275] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 24.926278] CPU: L2 Cache: 512K (64 bytes/line) [ 24.926280] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000 [ 24.926286] Intel machine check architecture supported. [ 24.926289] Intel machine check reporting enabled on CPU#0. [ 24.926294] Compat vDSO mapped to ffffe000. [ 24.926308] Checking 'hlt' instruction... OK. [ 24.930188] SMP alternatives: switching to UP code [ 24.930705] Freeing SMP alternatives: 13k freed [ 24.930709] ACPI: Core revision 20070126 [ 24.933945] CPU0: AMD Athlon(tm) XP 2800+ stepping 00 [ 24.933969] Total of 1 processors activated (4160.90 BogoMIPS). [ 24.934176] ENABLING IO-APIC IRQs [ 24.934367] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 25.045973] Brought up 1 CPUs [ 25.046000] CPU0 attaching sched-domain: [ 25.046003] domain 0: span 00000001 [ 25.046005] groups: 00000001 [ 25.046221] net_namespace: 64 bytes [ 25.046717] Time: 16:50:13 Date: 01/28/08 [ 25.046749] NET: Registered protocol family 16 [ 25.046994] ACPI: bus type pci registered [ 25.082395] PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2 [ 25.082398] PCI: Using configuration type 1 [ 25.082400] Setting up standard PCI resources [ 25.090219] ACPI: EC: Look up EC in DSDT [ 25.096032] ACPI: Interpreter enabled [ 25.096036] ACPI: (supports S0 S1 S4 S5) [ 25.096050] ACPI: Using IOAPIC for interrupt routing [ 25.106449] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 25.106527] PCI: nForce2 C1 Halt Disconnect fixup [ 25.107549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 25.107727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 25.107996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 25.163644] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 25.163843] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 25.164039] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 25.164230] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 25.164420] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.164612] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 25.164811] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 25.165008] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 25.165200] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.165392] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15) [ 25.165586] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.165778] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.165977] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 25.166171] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.166362] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.166553] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 25.166714] ACPI: PCI Interrupt Link [APC1] (IRQs *16) [ 25.166865] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 25.167015] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 25.167162] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 25.167316] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 25.167526] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 25.167736] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 25.167953] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 25.168163] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 25.168373] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 25.168581] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 25.168731] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. [ 25.168945] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 25.169154] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. [ 25.169363] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 25.169572] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 25.169732] ACPI: Power Resource [ISAV] (on) [ 25.169789] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.169831] pnp: PnP ACPI init [ 25.169840] ACPI: bus type pnp registered [ 25.175979] pnp: PnP ACPI: found 16 devices [ 25.175981] ACPI: ACPI bus type pnp unregistered [ 25.176170] usbcore: registered new interface driver usbfs [ 25.176242] usbcore: registered new interface driver hub [ 25.176292] usbcore: registered new device driver usb [ 25.176405] PCI: Using ACPI for IRQ routing [ 25.176409] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 25.226746] NetLabel: Initializing [ 25.226748] NetLabel: domain hash size = 128 [ 25.226750] NetLabel: protocols = UNLABELED CIPSOv4 [ 25.226762] NetLabel: unlabeled traffic allowed by default [ 25.227736] Time: tsc clocksource has been installed. [ 25.229773] system 00:00: ioport range 0x4000-0x407f has been reserved [ 25.229777] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 25.229780] system 00:00: ioport range 0x4400-0x447f has been reserved [ 25.229783] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 25.229786] system 00:00: ioport range 0x4200-0x427f has been reserved [ 25.229788] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 25.229795] system 00:01: ioport range 0x5000-0x503f has been reserved [ 25.229798] system 00:01: ioport range 0x5100-0x513f has been reserved [ 25.229804] system 00:02: iomem range 0xda800-0xdbfff has been reserved [ 25.229807] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved [ 25.229812] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 25.229815] system 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 25.229818] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved [ 25.229822] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved [ 25.229825] system 00:02: iomem range 0x0-0x9ffff could not be reserved [ 25.229828] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved [ 25.229831] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved [ 25.229834] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved [ 25.229840] system 00:04: ioport range 0xb78-0xb7b has been reserved [ 25.229843] system 00:04: ioport range 0xf78-0xf7b has been reserved [ 25.229845] system 00:04: ioport range 0xa78-0xa7b has been reserved [ 25.229848] system 00:04: ioport range 0xe78-0xe7b has been reserved [ 25.229851] system 00:04: ioport range 0xbbc-0xbbf has been reserved [ 25.229854] system 00:04: ioport range 0xfbc-0xfbf has been reserved [ 25.229856] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 25.229859] system 00:04: ioport range 0x294-0x297 has been reserved [ 25.260349] PCI: Bridge: 0000:00:08.0 [ 25.260352] IO window: 9000-afff [ 25.260357] MEM window: e3000000-e6ffffff [ 25.260361] PREFETCH window: 50000000-500fffff [ 25.260366] PCI: Bridge: 0000:00:1e.0 [ 25.260368] IO window: disabled. [ 25.260372] MEM window: e0000000-e2ffffff [ 25.260375] PREFETCH window: d0000000-dfffffff [ 25.260385] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 25.260402] NET: Registered protocol family 2 [ 25.269888] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.270255] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 25.271729] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 25.272478] TCP: Hash tables configured (established 131072 bind 65536) [ 25.272481] TCP reno registered [ 25.274871] checking if image is initramfs... it is [ 25.557129] Freeing initrd memory: 3630k freed [ 25.557552] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 25.557555] apm: overridden by ACPI. [ 25.557974] audit: initializing netlink socket (disabled) [ 25.557991] audit(1201539012.570:1): initialized [ 25.558127] highmem bounce pool size: 64 pages [ 25.558131] Total HugeTLB memory allocated, 0 [ 25.560861] SELinux: Registering netfilter hooks [ 25.560998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 25.561002] io scheduler noop registered [ 25.561004] io scheduler anticipatory registered [ 25.561007] io scheduler deadline registered [ 25.561018] io scheduler cfq registered (default) [ 25.582401] Boot video device is 0000:02:00.0 [ 25.587554] ACPI: Thermal Zone [THRM] (52 C) [ 25.587569] isapnp: Scanning for PnP cards... [ 25.760206] Switched to high resolution mode on CPU 0 [ 25.944487] isapnp: No Plug & Play device found [ 25.947347] Real Time Clock Driver v1.12ac [ 25.947500] Non-volatile memory driver v1.2 [ 25.947503] Linux agpgart interface v0.102 [ 25.947560] agpgart: Detected NVIDIA nForce2 chipset [ 25.963439] agpgart: AGP aperture is 256M @ 0xc0000000 [ 25.963465] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled [ 25.963614] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.963753] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 25.964066] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.964249] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 25.965135] RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize [ 25.965395] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 25.965399] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 25.965772] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.965847] mice: PS/2 mouse device common for all mice [ 25.986718] input: AT Translated Set 2 keyboard as /class/input/input0 [ 25.989187] EDAC MC: Ver: 2.1.0 Jan 24 2008 [ 25.989315] cpuidle: using governor ladder [ 25.989317] cpuidle: using governor menu [ 25.989396] usbcore: registered new interface driver hiddev [ 25.989433] usbcore: registered new interface driver usbhid [ 25.989437] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 25.989511] TCP cubic registered [ 25.989513] Initializing XFRM netlink socket [ 25.989589] NET: Registered protocol family 1 [ 25.989605] NET: Registered protocol family 17 [ 25.989612] Using IPI No-Shortcut mode [ 25.989626] registered taskstats version 1 [ 25.989754] Magic number: 8:557:844 [ 25.990071] Freeing unused kernel memory: 240k freed [ 25.990110] Write protecting the kernel text: 1952k [ 25.990123] Write protecting the kernel read-only data: 772k [ 26.282400] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 26.282409] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16 [ 26.282422] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 26.282425] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 26.282518] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 26.282557] ehci_hcd 0000:00:02.2: debug port 1 [ 26.282563] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 26.282574] ehci_hcd 0000:00:02.2: irq 16, io mem 0xe7005000 [ 26.287965] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 26.288090] usb usb1: configuration #1 chosen from 1 choice [ 26.288118] hub 1-0:1.0: USB hub found [ 26.288129] hub 1-0:1.0: 6 ports detected [ 26.394914] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 26.395326] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 26.395334] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17 [ 26.395348] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 26.395352] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 26.395426] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 26.395444] ohci_hcd 0000:00:02.0: irq 17, io mem 0xe7003000 [ 26.447950] usb usb2: configuration #1 chosen from 1 choice [ 26.447977] hub 2-0:1.0: USB hub found [ 26.447989] hub 2-0:1.0: 3 ports detected [ 26.549147] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 26.549151] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18 [ 26.549159] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 26.549163] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 26.549217] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 26.549230] ohci_hcd 0000:00:02.1: irq 18, io mem 0xe7004000 [ 26.594755] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 26.601832] usb usb3: configuration #1 chosen from 1 choice [ 26.601856] hub 3-0:1.0: USB hub found [ 26.601866] hub 3-0:1.0: 3 ports detected [ 26.708712] USB Universal Host Controller Interface driver v3.0 [ 26.709142] usb 1-1: configuration #1 chosen from 1 choice [ 26.709206] hub 1-1:1.0: USB hub found [ 26.709309] hub 1-1:1.0: 4 ports detected [ 26.767866] SCSI subsystem initialized [ 26.786664] Driver 'sd' needs updating - please use bus_type methods [ 26.804629] libata version 3.00 loaded. [ 26.810772] pata_amd 0000:00:09.0: version 0.3.10 [ 26.810934] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 26.811069] scsi0 : pata_amd [ 26.816599] scsi1 : pata_amd [ 26.817343] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 26.817347] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 26.972040] ata1.00: ATA-6: WDC WD2000JB-00EVA0, 15.05R15, max UDMA/100 [ 26.972044] ata1.00: 390721968 sectors, multi 16: LBA48 [ 26.978917] ata1.00: configured for UDMA/100 [ 27.302587] ata2.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS06, max UDMA/66 [ 27.346091] ata2.01: ATA-7: MAXTOR STM3320620A, 3.AAE, max UDMA/100 [ 27.346094] ata2.01: 625142448 sectors, multi 16: LBA48 [ 27.346103] ata2.00: limited to UDMA/33 due to 40-wire cable [ 27.519360] ata2.00: configured for UDMA/33 [ 27.554043] ata2.01: configured for UDMA/100 [ 27.554146] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JB-00E 15.0 PQ: 0 ANSI: 5 [ 27.554222] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 27.554236] sd 0:0:0:0: [sda] Write Protect is off [ 27.554239] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.554259] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.554310] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 27.554321] sd 0:0:0:0: [sda] Write Protect is off [ 27.554324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 27.554343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.554347] sda: sda1 sda2 [ 27.576777] sd 0:0:0:0: [sda] Attached SCSI disk [ 27.577661] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HS06 PQ: 0 ANSI: 5 [ 27.577772] scsi 1:0:1:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5 [ 27.577837] sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 27.577849] sd 1:0:1:0: [sdb] Write Protect is off [ 27.577852] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.577871] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.577920] sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 27.577932] sd 1:0:1:0: [sdb] Write Protect is off [ 27.577934] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 27.577953] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 27.577956] sdb:<6>usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 27.601964] sdb1 sdb2 sdb3 [ 27.602376] sd 1:0:1:0: [sdb] Attached SCSI disk [ 27.744716] usb 2-2: configuration #1 chosen from 1 choice [ 27.963802] usb 2-3: new low speed USB device using ohci_hcd and address 3 [ 28.127327] usb 2-3: configuration #1 chosen from 1 choice [ 28.142509] input: Chicony Saitek Eclipse II Keyboard as /class/input/input1 [ 28.146698] input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:02.0-3 [ 28.175283] input: Chicony Saitek Eclipse II Keyboard as /class/input/input2 [ 28.178705] input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:02.0-3 [ 28.395503] usb 3-3: new full speed USB device using ohci_hcd and address 2 [ 28.530990] usb 3-3: configuration #1 chosen from 1 choice [ 28.533944] hub 3-3:1.0: USB hub found [ 28.536917] hub 3-3:1.0: 4 ports detected [ 28.832282] usb 1-1.1: new low speed USB device using ehci_hcd and address 6 [ 29.020294] usb 1-1.1: configuration #1 chosen from 1 choice [ 29.782033] hiddev97hidraw2: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.2-1.1 [ 29.959457] usb 1-1.2: new full speed USB device using ehci_hcd and address 7 [ 30.052190] usb 1-1.2: configuration #1 chosen from 1 choice [ 30.128397] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com [ 30.152335] sata_sil 0000:01:0a.0: version 2.3 [ 30.152614] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 30.152622] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19 [ 30.158281] scsi2 : sata_sil [ 30.158336] scsi3 : sata_sil [ 30.158370] ata3: SATA max UDMA/100 mmio m512@0xe6004000 tf 0xe6004080 irq 19 [ 30.158375] ata4: SATA max UDMA/100 mmio m512@0xe6004000 tf 0xe60040c0 irq 19 [ 30.233321] usb 1-1.4: new high speed USB device using ehci_hcd and address 8 [ 30.318569] usb 1-1.4: configuration #1 chosen from 1 choice [ 30.318637] hub 1-1.4:1.0: USB hub found [ 30.318738] hub 1-1.4:1.0: 4 ports detected [ 30.461079] ata3: SATA link down (SStatus 0 SControl 310) [ 30.608087] usb 1-1.4.3: new low speed USB device using ehci_hcd and address 9 [ 30.699939] usb 1-1.4.3: configuration #1 chosen from 1 choice [ 30.704245] input: Logitech USB Receiver as /class/input/input3 [ 30.707939] input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.2-1.4.3 [ 30.884824] usb 1-1.4.4: new full speed USB device using ehci_hcd and address 10 [ 30.914779] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 30.918331] ata4.00: ATA-7: Hitachi HDT725040VLA360, V5COA7EA, max UDMA/133 [ 30.918335] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 30.924331] ata4.00: configured for UDMA/100 [ 30.924446] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5 [ 30.924527] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB) [ 30.924542] sd 3:0:0:0: [sdc] Write Protect is off [ 30.924545] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 30.924564] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.924616] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB) [ 30.924628] sd 3:0:0:0: [sdc] Write Protect is off [ 30.924630] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 30.924649] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.924653] sdc: sdc1 [ 30.937391] sd 3:0:0:0: [sdc] Attached SCSI disk [ 30.971195] usb 1-1.4.4: configuration #1 chosen from 1 choice [ 33.938587] EXT3-fs: INFO: recovery required on readonly filesystem. [ 33.938592] EXT3-fs: write access will be enabled during recovery. [ 38.878587] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 38.878643] ata1.00: BMDMA stat 0x65 [ 38.878694] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in [ 38.878695] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 38.878746] ata1.00: status: { DRDY ERR } [ 38.878792] ata1.00: error: { UNC } [ 38.905598] ata1.00: configured for UDMA/100 [ 38.905606] ata1: EH complete [ 40.923221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 40.923271] ata1.00: BMDMA stat 0x65 [ 40.923320] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in [ 40.923322] res 51/40:00:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 40.923372] ata1.00: status: { DRDY ERR } [ 40.923495] ata1.00: error: { UNC } [ 40.950180] ata1.00: configured for UDMA/100 [ 40.950185] ata1: EH complete [ 42.967882] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 42.968008] ata1.00: BMDMA stat 0x65 [ 42.968134] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in [ 42.968135] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 42.968340] ata1.00: status: { DRDY ERR } [ 42.968464] ata1.00: error: { UNC } [ 42.979747] ata1.00: configured for UDMA/100 [ 42.979752] ata1: EH complete [ 44.995973] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 44.996102] ata1.00: BMDMA stat 0x65 [ 44.996227] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in [ 44.996229] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 44.996432] ata1.00: status: { DRDY ERR } [ 44.996554] ata1.00: error: { UNC } [ 45.023334] ata1.00: configured for UDMA/100 [ 45.023339] ata1: EH complete [ 47.098786] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 47.098913] ata1.00: BMDMA stat 0x65 [ 47.099038] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in [ 47.099040] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 47.099244] ata1.00: status: { DRDY ERR } [ 47.099366] ata1.00: error: { UNC } [ 47.110882] ata1.00: configured for UDMA/100 [ 47.110887] ata1: EH complete [ 49.276447] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 49.276573] ata1.00: BMDMA stat 0x65 [ 49.276698] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in [ 49.276699] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 49.276903] ata1.00: status: { DRDY ERR } [ 49.277028] ata1.00: error: { UNC } [ 49.288365] ata1.00: configured for UDMA/100 [ 49.288377] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 [ 49.288381] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] [ 49.288385] Descriptor sense data with sense descriptors (in hex): [ 49.288387] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 49.288393] 00 07 3d 8b [ 49.288396] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4 [ 49.288399] end_request: I/O error, dev sda, sector 474507 [ 49.288415] ata1: EH complete [ 49.297395] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 49.299276] sd 0:0:0:0: [sda] Write Protect is off [ 49.299280] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 49.303585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 49.306616] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 49.317409] sd 0:0:0:0: [sda] Write Protect is off [ 49.317412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 49.320830] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 53.606855] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 53.606989] ata1.00: BMDMA stat 0x65 [ 53.607118] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in [ 53.607120] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 53.607324] ata1.00: status: { DRDY ERR } [ 53.607446] ata1.00: error: { UNC } [ 53.634393] ata1.00: configured for UDMA/100 [ 53.634401] ata1: EH complete [ 55.651542] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 55.651672] ata1.00: BMDMA stat 0x65 [ 55.651797] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in [ 55.651799] res 51/40:00:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 55.652002] ata1.00: status: { DRDY ERR } [ 55.652125] ata1.00: error: { UNC } [ 55.678936] ata1.00: configured for UDMA/100 [ 55.678941] ata1: EH complete [ 57.845829] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 57.845956] ata1.00: BMDMA stat 0x65 [ 57.846084] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in [ 57.846086] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 57.846289] ata1.00: status: { DRDY ERR } [ 57.846411] ata1.00: error: { UNC } [ 57.857425] ata1.00: configured for UDMA/100 [ 57.857430] ata1: EH complete [ 59.915393] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 59.915521] ata1.00: BMDMA stat 0x65 [ 59.915649] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in [ 59.915650] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 59.915854] ata1.00: status: { DRDY ERR } [ 59.915976] ata1.00: error: { UNC } [ 59.926980] ata1.00: configured for UDMA/100 [ 59.926985] ata1: EH complete [ 61.993309] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 61.993436] ata1.00: BMDMA stat 0x65 [ 61.993561] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in [ 61.993563] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 61.993766] ata1.00: status: { DRDY ERR } [ 61.993888] ata1.00: error: { UNC } [ 62.020550] ata1.00: configured for UDMA/100 [ 62.020555] ata1: EH complete [ 64.037975] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 64.038102] ata1.00: BMDMA stat 0x65 [ 64.038227] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in [ 64.038229] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error) [ 64.038432] ata1.00: status: { DRDY ERR } [ 64.038555] ata1.00: error: { UNC } [ 64.050125] ata1.00: configured for UDMA/100 [ 64.050134] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08 [ 64.050138] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor] [ 64.050142] Descriptor sense data with sense descriptors (in hex): [ 64.050143] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 64.050149] 00 07 3d 8b [ 64.050152] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4 [ 64.050155] end_request: I/O error, dev sda, sector 474507 [ 64.050169] ata1: EH complete [ 64.050382] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 64.050506] sd 0:0:0:0: [sda] Write Protect is off [ 64.050509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 64.050756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 64.051049] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB) [ 64.051173] sd 0:0:0:0: [sda] Write Protect is off [ 64.051176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 64.051422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 64.632360] kjournald starting. Commit interval 5 seconds [ 64.632378] EXT3-fs: dm-0: orphan cleanup on readonly fs [ 64.632385] ext3_orphan_cleanup: deleting unreferenced inode 17303473 [ 64.648547] ext3_orphan_cleanup: deleting unreferenced inode 38797436 [ 64.707760] ext3_orphan_cleanup: deleting unreferenced inode 37519565 [ 64.730253] EXT3-fs: dm-0: 3 orphan inodes deleted [ 64.730255] EXT3-fs: recovery complete. [ 64.816010] EXT3-fs: mounted filesystem with ordered data mode. [ 65.194899] audit(1201539052.235:2): enforcing=1 old_enforcing=0 auid=4294967295 [ 65.408684] SELinux:8192 avtab hash slots allocated.Num of rules:213166 [ 65.470766] SELinux:8192 avtab hash slots allocated.Num of rules:213166 [ 65.534876] security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats [ 65.534881] security: 67 classes, 213166 rules [ 65.537006] SELinux: Completing initialization. [ 65.537009] SELinux: Setting up existing superblocks. [ 65.559377] SELinux: initialized (dev dm-0, type ext3), uses xattr [ 65.720901] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 65.720917] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 65.721020] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 65.721032] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 65.721064] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 65.721073] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 65.721079] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 65.721090] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 65.721094] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 65.721102] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts [ 65.721109] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 65.721113] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 65.721118] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 65.721128] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 65.721140] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 65.721145] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 65.721169] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 65.725436] SELinux: policy loaded with handle_unknown=allow [ 65.725446] audit(1201539052.766:3): policy loaded auid=4294967295 [ 69.515151] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 69.515177] scsi 1:0:0:0: Attached scsi generic sg1 type 5 [ 69.515202] sd 1:0:1:0: Attached scsi generic sg2 type 0 [ 69.515231] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 70.057084] input: Power Button (FF) as /class/input/input4 [ 70.060611] ACPI: Power Button (FF) [PWRF] [ 70.060653] ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20070126] [ 70.060658] ACPI Warning (evxface-0145): Could not enable fixed event 3 [20070126] [ 70.060742] input: Power Button (CM) as /class/input/input5 [ 70.064592] ACPI: Power Button (CM) [PWRB] [ 70.064652] input: Sleep Button (CM) as /class/input/input6 [ 70.067603] ACPI: Sleep Button (CM) [SLPB] [ 70.385057] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005 [ 70.385082] usbcore: registered new interface driver usblp [ 70.412471] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 70.412498] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100 [ 70.450007] usbcore: registered new interface driver usbserial [ 70.450013] drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 70.569319] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device [ 70.569461] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected [ 70.569497] drivers/usb/serial/ftdi_sio.c: Detected FT232RL [ 70.569536] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0 [ 70.569552] usbcore: registered new interface driver ftdi_sio [ 70.569555] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver [ 70.615332] input: PC Speaker as /class/input/input7 [ 70.661362] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 70.661752] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 70.661757] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16 [ 70.661764] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 70.719617] Floppy drive(s): fd0 is 1.44M [ 70.736319] FDC 0 is a post-1991 82077 [ 71.173281] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:04:4b:5d:eb:7d [ 71.173286] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 71.173697] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 71.173705] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20 [ 71.206469] Linux video capture interface: v2.00 [ 71.231784] firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI version 1.10 [ 71.475562] nvidia: module license 'NVIDIA' taints kernel. [ 71.733592] firewire_core: created new fw device fw0 (0 config rom retries, S400) [ 71.738694] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20 [ 71.739120] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.07 Thu Dec 13 18:42:56 PST 2007 [ 72.053875] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded [ 72.053971] cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] [ 72.053975] cx88[0]: TV tuner type 60, Radio tuner type -1 [ 72.093539] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 72.198076] cx88[0]/2: cx2388x 8802 Driver Manager [ 72.200230] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 72.200241] ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21 [ 72.200254] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 21, latency: 32, mmio: 0xe4000000 [ 72.200328] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21 [ 72.200340] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 21, latency: 32, mmio: 0xe3000000 [ 72.379427] tda8290_probe: not probed - driver disabled by Kconfig [ 72.379432] tuner 2-0043: chip found @ 0x86 (cx88[0]) [ 72.379457] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) [ 72.379460] tuner 2-0043: type set to tda9887 [ 72.381847] tuner 2-0061: chip found @ 0xc2 (cx88[0]) [ 72.381866] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC)) [ 72.381869] tuner 2-0061: type set to Thomson DTT 761X (A [ 72.381871] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC)) [ 72.381874] tuner 2-0061: type set to Thomson DTT 761X (A [ 72.394034] cx88[0]/0: registered device video0 [v4l2] [ 72.394059] cx88[0]/0: registered device vbi0 [ 72.394083] cx88[0]/0: registered device radio0 [ 72.528367] cx88/2: cx2388x dvb driver version 0.0.6 loaded [ 72.528372] cx88/2: registering cx8802 driver, type: dvb access: shared [ 72.528376] cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22] [ 72.528380] cx88[0]/2: cx2388x based DVB/ATSC card [ 72.581302] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 72.581312] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 22 [ 72.586129] Audigy2 value: Special config. [ 72.695526] DVB: registering new adapter (cx88[0]) [ 72.695532] DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... [ 72.769048] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 [ 72.769054] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17 [ 72.769090] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 73.080499] intel8x0_measure_ac97_clock: measured 50742 usecs [ 73.080504] intel8x0: clocking to 47447 [ 75.947132] EXT3 FS on dm-0, internal journal [ 76.213561] kjournald starting. Commit interval 5 seconds [ 76.220513] EXT3 FS on sda1, internal journal [ 76.220518] EXT3-fs: mounted filesystem with ordered data mode. [ 76.226324] SELinux: initialized (dev sda1, type ext3), uses xattr [ 76.226733] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 76.231140] kjournald starting. Commit interval 5 seconds [ 76.238465] EXT3 FS on sdc1, internal journal [ 76.238469] EXT3-fs: mounted filesystem with ordered data mode. [ 76.245352] SELinux: initialized (dev sdc1, type ext3), uses xattr [ 77.211706] Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k [ 77.215361] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts [ 77.624868] warning: process `kudzu' used the deprecated sysctl system call with 1.23. [ 78.115621] NET: Registered protocol family 10 [ 78.115859] lo: Disabled Privacy Extensions [ 83.732476] RPC: Registered udp transport module. [ 83.732480] RPC: Registered tcp transport module. [ 83.735747] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ 84.406333] w83627hf: Found W83627HF chip at 0x290 [ 84.927130] audit(1201539072.923:4): audit_pid=1915 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 [ 86.877546] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 87.346561] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 87.501848] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 89.296245] eth0: no IPv6 routers present [ 129.766842] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 129.766858] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 129.766929] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode --Boundary-00=_8kgnH7YqN15XXyY-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/