Received-SPF: pass (google.com: domain of linux-kernel+bounces-166176-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
Precedence: bulk
MIME-Version: 1.0
References: <20240502090326.21489-1-quic_kbajaj@quicinc.com>
In-Reply-To: <20240502090326.21489-1-quic_kbajaj@quicinc.com>
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Thu, 2 May 2024 12:09:41 +0300
Message-ID: <CAA8EJprPLqj7GQM0vmN25U2+3kDow=NH8=-VC2N-0p92Ub3iCA@mail.gmail.com>
Subject: Re: [PATCH v3 0/3] Add devicetree support of USB for QDU/QRU1000
To: Komal Bajaj <quic_kbajaj@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, 
	Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, 
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, 
	linux-kernel@vger.kernel.org, Bjorn Andersson <quic_bjorande@quicinc.com>, 
	quic_wcheng@quicinc.com, quic_ppratap@quicinc.com, 
	Jack Pham <quic_jackp@quicinc.com>, Krishna Kurapati PSSNV <quic_kriskura@quicinc.com>
Content-Type: text/plain; charset="UTF-8"

On Thu, 2 May 2024 at 12:04, Komal Bajaj <quic_kbajaj@quicinc.com> wrote:
>
> This series adds devicetree nodes to support interconnects and usb for qdu/qru1000.
> This is based on previously sent driver series[1].
>
> ------
> Changes in v3:
> * As per comments on upstream[2], to get role-switch working on QDU/QRU1000, it was recommended to
>   use the actual TI switch driver. Since driver doesn't have the functionality to provide role-switch
>   based on gpio, thus reverting back USB dr_mode to peripheral and removed the remote end-point nodes
>   and usb-conn-gpio based role switch functionality.

This is not correct. The recommendation was to describe hardware properly.
Which means adding schema description, adding  ti,your-switch
compatible to the usb-conn-gpio.c driver, etc.

> * Link to v2: https://lore.kernel.org/linux-arm-msm/20240319091020.15137-1-quic_kbajaj@quicinc.com/
>
> Changes in v2:
> * Changes qmpphy node name
> * Changes dr_mode to otg and added USB-B port USB role switch
> * Dropped maximum-speed property from usb dwc3 node
> * Link to v1: https://lore.kernel.org/linux-arm-msm/20240311120859.18489-1-quic_kbajaj@quicinc.com/
>
> [1] https://lore.kernel.org/linux-arm-msm/20240502082017.13777-1-quic_kbajaj@quicinc.com/
> [2] https://lore.kernel.org/all/CAA8EJppNZrLzT=vGS0NXnKJT_wL+bMB9jFhJ9K7b7FPgFQbcig@mail.gmail.com/
> ------
>
> Komal Bajaj (3):
>   arm64: dts: qcom: qdu1000: Add USB3 and PHY support
>   arm64: dts: qcom: qdu1000-idp: enable USB nodes
>   arm64: dts: qcom: qru1000-idp: enable USB nodes
>
>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts |  23 +++++
>  arch/arm64/boot/dts/qcom/qdu1000.dtsi    | 120 +++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/qru1000-idp.dts |  23 +++++
>  3 files changed, 166 insertions(+)
>
> --
> 2.42.0
>
>


-- 
With best wishes
Dmitry