Received-SPF: pass (google.com: domain of linux-kernel+bounces-167048-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Thu, 2 May 2024 16:13:23 -0700
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Jonathan Denose <jdenose@google.com>
Cc: LKML <linux-kernel@vger.kernel.org>, linux-input@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jeffery Miller <jefferymiller@google.com>
Subject: Re: [PATCH] Input: elantech - fix touchpad state on resume for
 Lenovo N24
Message-ID: <ZjQeE643YAbK1hq5@google.com>
References: <20240501140231.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240501140231.1.Ifa0e25ebf968d8f307f58d678036944141ab17e6@changeid>

On Wed, May 01, 2024 at 02:02:32PM +0000, Jonathan Denose wrote:
> The Lenovo N24 on resume becomes stuck in a state where it
> sends incorrect packets, causing elantech_packet_check_v4 to fail.
> The only way for the device to resume sending the correct packets is for
> it to be disabled and then re-enabled.
> 
> This change adds a dmi check to trigger this behavior on resume.
> Signed-off-by: Jonathan Denose <jdenose@google.com>
> ---
> 
>  drivers/input/mouse/elantech.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index 4e38229404b4b..e0f3095b4227e 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -1476,6 +1476,23 @@ static void elantech_disconnect(struct psmouse *psmouse)
>  	psmouse->private = NULL;
>  }
>  
> +/*
> + * Some hw_version 4 models fail to properly activate absolute mode on
> + * resume without going through disable/enable cycle.
> + */
> +static const struct dmi_system_id elantech_needs_reenable[] = {
> +#if defined(CONFIG_DMI) && defined(CONFIG_X86)
> +	{
> +		/* Lenovo N24 */
> +		.matches = {
> +			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
> +		},
> +	},
> +#endif
> +	{ }
> +};
> +
>  /*
>   * Put the touchpad back into absolute mode when reconnecting
>   */
> @@ -1486,6 +1503,22 @@ static int elantech_reconnect(struct psmouse *psmouse)
>  	if (elantech_detect(psmouse, 0))
>  		return -1;
>  
> +	if (dmi_check_system(elantech_needs_reenable)) {
> +		int err;
> +
> +		err = ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_DISABLE, NULL);

This and below should be ps2_command().

> +
> +		if (err)
> +			psmouse_warn(psmouse, "Failed to deactivate mouse on %s: %d\n",
> +					psmouse->ps2dev.serio->phys, err);
> +
> +		err = ps2_sendbyte(&psmouse->ps2dev, PSMOUSE_CMD_ENABLE, NULL);
> +
> +		if (err)
> +			psmouse_warn(psmouse, "Failed to reactivate mouse on %s: %d\n",
> +					psmouse->ps2dev.serio->phys, err);
> +	}
> +
>  	if (elantech_set_absolute_mode(psmouse)) {
>  		psmouse_err(psmouse,
>  			    "failed to put touchpad back into absolute mode.\n");
> -- 
> 2.45.0.rc0.197.gbae5840b3b-goog
> 

Thanks.

-- 
Dmitry