Received-SPF: pass (google.com: domain of linux-kernel+bounces-167369-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Lee Jones <lee@kernel.org>
To: Lee Jones <lee@kernel.org>, Rob Herring <robh@kernel.org>, 
 Krzysztof Kozlowski <krzk+dt@kernel.org>, 
 Conor Dooley <conor+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>, 
 Linus Walleij <linus.walleij@linaro.org>, 
 Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, 
 Sebastian Reichel <sebastian.reichel@collabora.com>, 
 Alex Bee <knaerzche@gmail.com>
Cc: Chris Zhong <zyw@rock-chips.com>, Zhang Qing <zhangqing@rock-chips.com>, 
 devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, 
 linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, 
 linux-gpio@vger.kernel.org
In-Reply-To: <20240416161237.2500037-1-knaerzche@gmail.com>
References: <20240416161237.2500037-1-knaerzche@gmail.com>
Subject: Re: [PATCH v4 0/5] Add RK816 PMIC support
Message-Id: <171472425816.1279735.1509285489643125462.b4-ty@kernel.org>
Date: Fri, 03 May 2024 09:17:38 +0100
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 8bit

On Tue, 16 Apr 2024 18:12:32 +0200, Alex Bee wrote:
> This series aims to add support for Rockchip RK816 PMIC series. As per
> datasheet it's targeted for RK3126/RK3128 (RK816-1), RK1108 (RK816-2) and
> PX3-SE (RK816-3) but might be used for other SoCs as well. The MFD consists
> of an integrated RTC, a GPIO controller, two 32k clock outputs, a power
> key, 3 buck- and 6 ldo regulators, 3 regulator-switches, and charger with
> integrated fuel gauge. Charger and fuel gauge are not part of this series.
> Two of the switches (otg/boost) are part of the binding, but not of
> the driver. They must only ever be enabled if no battery charging is
> happening, but it will be enabled automatically if a battery is attached
> and an external power source is connected. Thus that needs some
> incorporation of a yet to be added charger driver.
> Integration in the existing rk8xx-infrastructure was pretty straightforward
> and only needed very little tweaking. In order to not further bloat the
> driver(s) too much with additional `#define`s I tried to re-use existing
> ones wherever possible.
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: mfd: Add rk816 binding
      commit: 06dfb41b1cf8d64327e5c4391e165f466506c4f0
[2/5] mfd: rk8xx: Add RK816 support
      commit: e9006f81faf8e438ea83626db578610e49f31576
[3/5] pinctrl: rk805: Add rk816 pinctrl support
      commit: 1bd97d64b5f0c01d03ecc9473ccfcf180dbbf54a
[4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range
      commit: 9f4e899c286b5127e2443d50e37ee2112efbfa2c
[5/5] regulator: rk808: Add RK816 support
      commit: 5eb068da74a0b443fb99a89d9e5062691649c470

--
Lee Jones [李琼斯]