Received-SPF: pass (google.com: domain of linux-kernel+bounces-167511-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45d1:ec00::1 as permitted sender) client-ip=2604:1380:45d1:ec00::1;
From: Ricky Wu <en-wei.wu@canonical.com>
To: jesse.brandeburg@intel.com
Cc: anthony.l.nguyen@intel.com,
	intel-wired-lan@lists.osuosl.org,
	davem@davemloft.net,
	edumazet@google.com,
	kuba@kernel.org,
	pabeni@redhat.com,
	netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	rickywu0421@gmail.com,
	en-wei.wu@canonical.com
Subject: [PATCH v2 2/2] e1000e: fix link fluctuations problem
Date: Fri,  3 May 2024 18:18:36 +0800
Message-Id: <20240503101836.32755-1-en-wei.wu@canonical.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

As described in https://bugzilla.kernel.org/show_bug.cgi?id=218642,
Intel I219-LM reports link up -> link down -> link up after hot-plugging
the Ethernet cable.

The problem is because the unstable behavior of Link Status bit in
PHY Status Register of some e1000e NIC. When we re-plug the cable,
the e1000e_phy_has_link_generic() (called after the Link-Status-Changed
interrupt) has read this bit with 1->0->1 (1=link up, 0=link down)
and e1000e reports it to net device layer respectively.

This patch solves the problem by passing polling delays on
e1000e_phy_has_link_generic() so that it will not get the unstable
states of Link Status bit.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218642
Fixes: 7d3cabbcc86 ("e1000e: disable K1 at 1000Mbps for 82577/82578")
Signed-off-by: Ricky Wu <en-wei.wu@canonical.com>
---

In v2:
* Split the sleep codes part into PATCHSET [1/2]
---
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index f9e94be36e97..68f5698a22b0 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1428,7 +1428,17 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
 	 * link.  If so, then we want to get the current speed/duplex
 	 * of the PHY.
 	 */
-	ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+	/* We've seen that I219-LM sometimes has link fluctuations
+	 * (link up -> link down -> link up) after hot-plugging the cable.
+	 * The problem is caused by the instability of the Link Status bit
+	 * (BMSR_LSTATUS) in MII Status Register. The average time between
+	 * the first link up and link down is between 3~4 ms.
+	 * Increasing the iteration times and setting up the delay to
+	 * 100ms (which is safe) solves the problem.
+	 * This behavior hasn't been seen on other NICs and also not being
+	 * documented in datasheet/errata.
+	 */
+	ret_val = e1000e_phy_has_link_generic(hw, COPPER_LINK_UP_LIMIT, 100000, &link);
 	if (ret_val)
 		goto out;
 
-- 
2.40.1