Received-SPF: pass (google.com: domain of linux-kernel+bounces-167780-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Date: Fri, 3 May 2024 16:37:42 +0200
From: Manuel Traut <manut@mecka.net>
To: Jens Wiklander <jens.wiklander@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	op-tee@lists.trustedfirmware.org,
	Shyam Saini <shyamsaini@linux.microsoft.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jerome Forissier <jerome.forissier@linaro.org>,
	Sumit Garg <sumit.garg@linaro.org>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Bart Van Assche <bvanassche@acm.org>,
	Randy Dunlap <rdunlap@infradead.org>,
	Ard Biesheuvel <ardb@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: [PATCH v5 3/3] optee: probe RPMB device using RPMB subsystem
Message-ID: <ZjT2thFR0oZ96g4M@mecka.net>
References: <20240422091936.3714381-1-jens.wiklander@linaro.org>
 <20240422091936.3714381-4-jens.wiklander@linaro.org>
 <Zioezu_sOqJ0xC6u@mecka.net>
 <CAHUa44EJrWoJabHJTABfPFswAp0PiTaTSrrdomhrQvciDxXDCQ@mail.gmail.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <CAHUa44EJrWoJabHJTABfPFswAp0PiTaTSrrdomhrQvciDxXDCQ@mail.gmail.com>

On Fri, Apr 26, 2024 at 03:40:50PM +0200, Jens Wiklander wrote:
> On Thu, Apr 25, 2024 at 11:13 AM Manuel Traut <manut@mecka.net> wrote:
> >
> > On Mon, Apr 22, 2024 at 11:19:36AM +0200, Jens Wiklander wrote:
> > > Adds support in the OP-TEE drivers (both SMC and FF-A ABIs) to probe and
> > > use an RPMB device via the RPMB subsystem instead of passing the RPMB
> > > frames via tee-supplicant in user space. A fallback mechanism is kept to
> > > route RPMB frames via tee-supplicant if the RPMB subsystem isn't
> > > available.
> > >
> > > The OP-TEE RPC ABI is extended to support iterating over all RPMB
> > > devices until one is found with the expected RPMB key already
> > > programmed.
> >
> > I tested this with fTPM running as built-in TA in optee_os.
> > The first user of the TA is u-boot. u-boot handles the RPMB requests.
> >
> > If the tpm-ftpm-tee kernel driver gets probed it triggers also some
> > RPMB requests. However they are not handled by the new RPMB subsystem.
> >
> > I did some workaround (see below) but I guess this no good solution.
> > Need to think longer about this..
> 
> That's interesting. Again, thanks for testing.
> 
> >
> > > Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
> > > ---
> > >  drivers/tee/optee/core.c          |  30 ++++
> > >  drivers/tee/optee/device.c        |   7 +
> > >  drivers/tee/optee/ffa_abi.c       |   8 ++
> > >  drivers/tee/optee/optee_private.h |  21 ++-
> > >  drivers/tee/optee/optee_rpc_cmd.h |  35 +++++
> > >  drivers/tee/optee/rpc.c           | 232 ++++++++++++++++++++++++++++++
> > >  drivers/tee/optee/smc_abi.c       |   7 +
> > >  7 files changed, 339 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
> > > index 3aed554bc8d8..082691c10a90 100644
> > > --- a/drivers/tee/optee/core.c
> > > +++ b/drivers/tee/optee/core.c
> > > @@ -11,6 +11,7 @@
> > >  #include <linux/io.h>
> > >  #include <linux/mm.h>
> > >  #include <linux/module.h>
> > > +#include <linux/rpmb.h>
> > >  #include <linux/slab.h>
> > >  #include <linux/string.h>
> > >  #include <linux/tee_drv.h>
> > > @@ -80,6 +81,31 @@ void optee_pool_op_free_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
> > >       shm->pages = NULL;
> > >  }
> > >
> > > +void optee_bus_scan_rpmb(struct work_struct *work)
> > > +{
> > > +     struct optee *optee = container_of(work, struct optee,
> > > +                                        rpmb_scan_bus_work);
> > > +     int ret;
> > > +
> > > +     if (!optee->rpmb_scan_bus_done) {
> > > +             ret = optee_enumerate_devices(PTA_CMD_GET_DEVICES_RPMB);
> > > +             optee->rpmb_scan_bus_done = !ret;
> > > +             if (ret && ret != -ENODEV)
> > > +                     pr_info("Scanning for RPMB device: ret %d\n", ret);
> > > +     }
> > > +}
> > > +
> > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
> > > +                      void *data)
> > > +{
> > > +     struct optee *optee = container_of(intf, struct optee, rpmb_intf);
> > > +
> > > +     if (action == RPMB_NOTIFY_ADD_DEVICE)
> > > +             schedule_work(&optee->rpmb_scan_bus_work);
> > > +
> > > +     return 0;
> > > +}
> > > +
> > >  static void optee_bus_scan(struct work_struct *work)
> > >  {
> > >       WARN_ON(optee_enumerate_devices(PTA_CMD_GET_DEVICES_SUPP));
> > > @@ -161,6 +187,8 @@ void optee_release_supp(struct tee_context *ctx)
> > >
> > >  void optee_remove_common(struct optee *optee)
> > >  {
> > > +     rpmb_interface_unregister(&optee->rpmb_intf);
> > > +     cancel_work_sync(&optee->rpmb_scan_bus_work);
> > >       /* Unregister OP-TEE specific client devices on TEE bus */
> > >       optee_unregister_devices();
> > >
> > > @@ -177,6 +205,8 @@ void optee_remove_common(struct optee *optee)
> > >       tee_shm_pool_free(optee->pool);
> > >       optee_supp_uninit(&optee->supp);
> > >       mutex_destroy(&optee->call_queue.mutex);
> > > +     rpmb_dev_put(optee->rpmb_dev);
> > > +     mutex_destroy(&optee->rpmb_dev_mutex);
> > >  }
> > >
> > >  static int smc_abi_rc;
> > > diff --git a/drivers/tee/optee/device.c b/drivers/tee/optee/device.c
> > > index 4b1092127694..4274876857c8 100644
> > > --- a/drivers/tee/optee/device.c
> > > +++ b/drivers/tee/optee/device.c
> > > @@ -43,6 +43,13 @@ static int get_devices(struct tee_context *ctx, u32 session,
> > >       ret = tee_client_invoke_func(ctx, &inv_arg, param);
> > >       if ((ret < 0) || ((inv_arg.ret != TEEC_SUCCESS) &&
> > >                         (inv_arg.ret != TEEC_ERROR_SHORT_BUFFER))) {
> > > +             /*
> > > +              * TEE_ERROR_STORAGE_NOT_AVAILABLE is returned when getting
> > > +              * the list of device TAs that depends on RPMB but a usable
> > > +              * RPMB device isn't found.
> > > +              */
> > > +             if (inv_arg.ret == TEE_ERROR_STORAGE_NOT_AVAILABLE)
> > > +                     return -ENODEV;
> > >               pr_err("PTA_CMD_GET_DEVICES invoke function err: %x\n",
> > >                      inv_arg.ret);
> > >               return -EINVAL;
> > > diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
> > > index ecb5eb079408..a8dfdb30b4e8 100644
> > > --- a/drivers/tee/optee/ffa_abi.c
> > > +++ b/drivers/tee/optee/ffa_abi.c
> > > @@ -7,6 +7,7 @@
> > >
> > >  #include <linux/arm_ffa.h>
> > >  #include <linux/errno.h>
> > > +#include <linux/rpmb.h>
> > >  #include <linux/scatterlist.h>
> > >  #include <linux/sched.h>
> > >  #include <linux/slab.h>
> > > @@ -934,6 +935,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> > >       optee_cq_init(&optee->call_queue, 0);
> > >       optee_supp_init(&optee->supp);
> > >       optee_shm_arg_cache_init(optee, arg_cache_flags);
> > > +     mutex_init(&optee->rpmb_dev_mutex);
> > >       ffa_dev_set_drvdata(ffa_dev, optee);
> > >       ctx = teedev_open(optee->teedev);
> > >       if (IS_ERR(ctx)) {
> > > @@ -955,6 +957,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> > >       if (rc)
> > >               goto err_unregister_devices;
> > >
> > > +     INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
> > > +     optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
> > > +     rpmb_interface_register(&optee->rpmb_intf);
> > >       pr_info("initialized driver\n");
> > >       return 0;
> > >
> > > @@ -968,6 +973,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
> > >       teedev_close_context(ctx);
> > >  err_rhashtable_free:
> > >       rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
> > > +     rpmb_dev_put(optee->rpmb_dev);
> > > +     mutex_destroy(&optee->rpmb_dev_mutex);
> > > +     rpmb_interface_unregister(&optee->rpmb_intf);
> > >       optee_supp_uninit(&optee->supp);
> > >       mutex_destroy(&optee->call_queue.mutex);
> > >       mutex_destroy(&optee->ffa.mutex);
> > > diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
> > > index 7a5243c78b55..ae72f3dda1d2 100644
> > > --- a/drivers/tee/optee/optee_private.h
> > > +++ b/drivers/tee/optee/optee_private.h
> > > @@ -8,6 +8,7 @@
> > >
> > >  #include <linux/arm-smccc.h>
> > >  #include <linux/rhashtable.h>
> > > +#include <linux/rpmb.h>
> > >  #include <linux/semaphore.h>
> > >  #include <linux/tee_drv.h>
> > >  #include <linux/types.h>
> > > @@ -20,11 +21,13 @@
> > >  /* Some Global Platform error codes used in this driver */
> > >  #define TEEC_SUCCESS                 0x00000000
> > >  #define TEEC_ERROR_BAD_PARAMETERS    0xFFFF0006
> > > +#define TEEC_ERROR_ITEM_NOT_FOUND    0xFFFF0008
> > >  #define TEEC_ERROR_NOT_SUPPORTED     0xFFFF000A
> > >  #define TEEC_ERROR_COMMUNICATION     0xFFFF000E
> > >  #define TEEC_ERROR_OUT_OF_MEMORY     0xFFFF000C
> > >  #define TEEC_ERROR_BUSY                      0xFFFF000D
> > >  #define TEEC_ERROR_SHORT_BUFFER              0xFFFF0010
> > > +#define TEE_ERROR_STORAGE_NOT_AVAILABLE 0xF0100003
> > >
> > >  #define TEEC_ORIGIN_COMMS            0x00000002
> > >
> > > @@ -197,6 +200,12 @@ struct optee_ops {
> > >   * @notif:           notification synchronization struct
> > >   * @supp:            supplicant synchronization struct for RPC to supplicant
> > >   * @pool:            shared memory pool
> > > + * @mutex:           mutex protecting @rpmb_dev
> > > + * @rpmb_dev:                current RPMB device or NULL
> > > + * @rpmb_scan_bus_done       flag if device registation of RPMB dependent devices
> > > + *                   was already done
> > > + * @rpmb_scan_bus_work       workq to for an RPMB device and to scan optee bus
> > > + *                   and register RPMB dependent optee drivers
> > >   * @rpc_param_count: If > 0 number of RPC parameters to make room for
> > >   * @scan_bus_done    flag if device registation was already done.
> > >   * @scan_bus_work    workq to scan optee bus and register optee drivers
> > > @@ -215,9 +224,15 @@ struct optee {
> > >       struct optee_notif notif;
> > >       struct optee_supp supp;
> > >       struct tee_shm_pool *pool;
> > > +     /* Protects rpmb_dev pointer */
> > > +     struct mutex rpmb_dev_mutex;
> > > +     struct rpmb_dev *rpmb_dev;
> > > +     struct notifier_block rpmb_intf;
> > >       unsigned int rpc_param_count;
> > > -     bool   scan_bus_done;
> > > +     bool scan_bus_done;
> > > +     bool rpmb_scan_bus_done;
> > >       struct work_struct scan_bus_work;
> > > +     struct work_struct rpmb_scan_bus_work;
> > >  };
> > >
> > >  struct optee_session {
> > > @@ -280,8 +295,12 @@ int optee_cancel_req(struct tee_context *ctx, u32 cancel_id, u32 session);
> > >
> > >  #define PTA_CMD_GET_DEVICES          0x0
> > >  #define PTA_CMD_GET_DEVICES_SUPP     0x1
> > > +#define PTA_CMD_GET_DEVICES_RPMB     0x2
> > >  int optee_enumerate_devices(u32 func);
> > >  void optee_unregister_devices(void);
> > > +void optee_bus_scan_rpmb(struct work_struct *work);
> > > +int optee_rpmb_intf_rdev(struct notifier_block *intf, unsigned long action,
> > > +                      void *data);
> > >
> > >  int optee_pool_op_alloc_helper(struct tee_shm_pool *pool, struct tee_shm *shm,
> > >                              size_t size, size_t align,
> > > diff --git a/drivers/tee/optee/optee_rpc_cmd.h b/drivers/tee/optee/optee_rpc_cmd.h
> > > index f3f06e0994a7..f351a8ac69fc 100644
> > > --- a/drivers/tee/optee/optee_rpc_cmd.h
> > > +++ b/drivers/tee/optee/optee_rpc_cmd.h
> > > @@ -16,6 +16,14 @@
> > >   * and sends responses.
> > >   */
> > >
> > > +/*
> > > + * Replay Protected Memory Block access
> > > + *
> > > + * [in]     memref[0]            Frames to device
> > > + * [out]    memref[1]            Frames from device
> > > + */
> > > +#define OPTEE_RPC_CMD_RPMB           1
> > > +
> > >  /*
> > >   * Get time
> > >   *
> > > @@ -103,4 +111,31 @@
> > >  /* I2C master control flags */
> > >  #define OPTEE_RPC_I2C_FLAGS_TEN_BIT  BIT(0)
> > >
> > > +/*
> > > + * Reset RPMB probing
> > > + *
> > > + * Releases an eventually already used RPMB devices and starts over searching
> > > + * for RPMB devices. Returns the kind of shared memory to use in subsequent
> > > + * OPTEE_RPC_CMD_RPMB_PROBE_NEXT and OPTEE_RPC_CMD_RPMB calls.
> > > + *
> > > + * [out]    value[0].a           OPTEE_RPC_SHM_TYPE_*, the parameter for
> > > + *                       OPTEE_RPC_CMD_SHM_ALLOC
> > > + */
> > > +#define OPTEE_RPC_CMD_RPMB_PROBE_RESET       22
> > > +
> > > +/*
> > > + * Probe next RPMB device
> > > + *
> > > + * [out]    value[0].a           Type of RPMB device, OPTEE_RPC_RPMB_*
> > > + * [out]    value[0].b           EXT CSD-slice 168 "RPMB Size"
> > > + * [out]    value[0].c           EXT CSD-slice 222 "Reliable Write Sector Count"
> > > + * [out]    memref[1]       Buffer with the raw CID
> > > + */
> > > +#define OPTEE_RPC_CMD_RPMB_PROBE_NEXT        23
> > > +
> > > +/* Type of RPMB device */
> > > +#define OPTEE_RPC_RPMB_EMMC          0
> > > +#define OPTEE_RPC_RPMB_UFS           1
> > > +#define OPTEE_RPC_RPMB_NVME          2
> > > +
> > >  #endif /*__OPTEE_RPC_CMD_H*/
> > > diff --git a/drivers/tee/optee/rpc.c b/drivers/tee/optee/rpc.c
> > > index e69bc6380683..a3e4c1830f39 100644
> > > --- a/drivers/tee/optee/rpc.c
> > > +++ b/drivers/tee/optee/rpc.c
> > > @@ -7,6 +7,7 @@
> > >
> > >  #include <linux/delay.h>
> > >  #include <linux/i2c.h>
> > > +#include <linux/rpmb.h>
> > >  #include <linux/slab.h>
> > >  #include <linux/tee_drv.h>
> > >  #include "optee_private.h"
> > > @@ -255,6 +256,228 @@ void optee_rpc_cmd_free_suppl(struct tee_context *ctx, struct tee_shm *shm)
> > >       optee_supp_thrd_req(ctx, OPTEE_RPC_CMD_SHM_FREE, 1, &param);
> > >  }
> > >
> > > +static void handle_rpc_func_rpmb_probe_reset(struct tee_context *ctx,
> > > +                                          struct optee *optee,
> > > +                                          struct optee_msg_arg *arg)
> > > +{
> > > +     struct tee_param params[1];
> > > +
> > > +     if (!IS_ENABLED(CONFIG_RPMB)) {
> > > +             handle_rpc_supp_cmd(ctx, optee, arg);
> > > +             return;
> > > +     }
> > > +
> > > +     if (arg->num_params != ARRAY_SIZE(params) ||
> > > +         optee->ops->from_msg_param(optee, params, arg->num_params,
> > > +                                    arg->params) ||
> > > +         params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT) {
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +             return;
> > > +     }
> > > +
> > > +     params[0].u.value.a = OPTEE_RPC_SHM_TYPE_KERNEL;
> > > +     params[0].u.value.b = 0;
> > > +     params[0].u.value.c = 0;
> > > +     if (optee->ops->to_msg_param(optee, arg->params,
> > > +                                  arg->num_params, params)) {
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +             return;
> > > +     }
> > > +
> > > +     mutex_lock(&optee->rpmb_dev_mutex);
> > > +     rpmb_dev_put(optee->rpmb_dev);
> > > +     optee->rpmb_dev = NULL;
> > > +     mutex_unlock(&optee->rpmb_dev_mutex);
> > > +
> > > +     arg->ret = TEEC_SUCCESS;
> > > +}
> > > +
> > > +static int rpmb_type_to_rpc_type(enum rpmb_type rtype)
> > > +{
> > > +     switch (rtype) {
> > > +     case RPMB_TYPE_EMMC:
> > > +             return OPTEE_RPC_RPMB_EMMC;
> > > +     case RPMB_TYPE_UFS:
> > > +             return OPTEE_RPC_RPMB_UFS;
> > > +     case RPMB_TYPE_NVME:
> > > +             return OPTEE_RPC_RPMB_NVME;
> > > +     default:
> > > +             return -1;
> > > +     }
> > > +}
> > > +
> > > +static int rpc_rpmb_match(struct rpmb_dev *rdev, const void *data)
> > > +{
> > > +     return rpmb_type_to_rpc_type(rdev->descr.type) >= 0;
> > > +}
> > > +
> > > +static void handle_rpc_func_rpmb_probe_next(struct tee_context *ctx,
> > > +                                         struct optee *optee,
> > > +                                         struct optee_msg_arg *arg)
> > > +{
> > > +     struct rpmb_dev *rdev;
> > > +     struct tee_param params[2];
> > > +     void *buf;
> > > +
> > > +     if (!IS_REACHABLE(CONFIG_RPMB)) {
> > > +             handle_rpc_supp_cmd(ctx, optee, arg);
> > > +             return;
> > > +     }
> > > +
> > > +     if (arg->num_params != ARRAY_SIZE(params) ||
> > > +         optee->ops->from_msg_param(optee, params, arg->num_params,
> > > +                                    arg->params) ||
> > > +         params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_OUTPUT ||
> > > +         params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +             return;
> > > +     }
> > > +     buf = tee_shm_get_va(params[1].u.memref.shm,
> > > +                          params[1].u.memref.shm_offs);
> > > +     if (!buf) {
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +             return;
> > > +     }
> > > +
> > > +     mutex_lock(&optee->rpmb_dev_mutex);
> > > +     rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
> > > +     rpmb_dev_put(optee->rpmb_dev);
> > > +     optee->rpmb_dev = rdev;
> > > +     mutex_unlock(&optee->rpmb_dev_mutex);
> > > +
> > > +     if (!rdev) {
> > > +             arg->ret = TEEC_ERROR_ITEM_NOT_FOUND;
> > > +             return;
> > > +     }
> > > +
> > > +     if (params[1].u.memref.size < rdev->descr.dev_id_len) {
> > > +             arg->ret = TEEC_ERROR_SHORT_BUFFER;
> > > +             return;
> > > +     }
> > > +     memcpy(buf, rdev->descr.dev_id, rdev->descr.dev_id_len);
> > > +     params[1].u.memref.size = rdev->descr.dev_id_len;
> > > +     params[0].u.value.a = rpmb_type_to_rpc_type(rdev->descr.type);
> > > +     params[0].u.value.b = rdev->descr.capacity;
> > > +     params[0].u.value.c = rdev->descr.reliable_wr_count;
> > > +     if (optee->ops->to_msg_param(optee, arg->params,
> > > +                                  arg->num_params, params)) {
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +             return;
> > > +     }
> > > +
> > > +     arg->ret = TEEC_SUCCESS;
> > > +}
> > > +
> > > +/* Request */
> > > +struct rpmb_req {
> > > +     u16 cmd;
> > > +#define RPMB_CMD_DATA_REQ      0x00
> > > +#define RPMB_CMD_GET_DEV_INFO  0x01
> > > +     u16 dev_id;
> > > +     u16 block_count;
> > > +     /* Optional data frames (rpmb_data_frame) follow */
> > > +};
> > > +
> > > +#define RPMB_REQ_DATA(req) ((void *)((struct rpmb_req *)(req) + 1))

This is the root cause for the non page aligned buffer we discussed in

v5 2/3 mmc: block: register RPMB partition with the RPMB subsystem

> > > +
> > > +#define RPMB_CID_SZ 16
> > > +
> > > +/* Response to device info request */
> > > +struct rpmb_dev_info {
> > > +     u8 cid[RPMB_CID_SZ];
> > > +     u8 rpmb_size_mult;      /* RPMB size in units of 128kB */
> > > +     u8 reliable_wr_count;   /* RPMB write size in units of 256 bytes */
> > > +     u8 ret_code;
> > > +#define RPMB_CMD_GET_DEV_INFO_RET_OK     0x00
> > > +#define RPMB_CMD_GET_DEV_INFO_RET_ERROR  0x01
> > > +};
> > > +
> > > +static int get_dev_info(struct rpmb_dev *rdev, void *rsp, size_t rsp_size)
> > > +{
> > > +     struct rpmb_dev_info *dev_info;
> > > +
> > > +     if (rsp_size != sizeof(*dev_info))
> > > +             return TEEC_ERROR_BAD_PARAMETERS;
> > > +
> > > +     dev_info = rsp;
> > > +     memcpy(dev_info->cid, rdev->descr.dev_id, sizeof(dev_info->cid));
> > > +     dev_info->rpmb_size_mult = rdev->descr.capacity;
> > > +     dev_info->reliable_wr_count = rdev->descr.reliable_wr_count;
> > > +     dev_info->ret_code = RPMB_CMD_GET_DEV_INFO_RET_OK;
> > > +
> > > +     return TEEC_SUCCESS;
> > > +}
> > > +
> > > +/*
> > > + * req is one struct rpmb_req followed by one or more struct rpmb_data_frame
> > > + * rsp is either one struct rpmb_dev_info or one or more struct rpmb_data_frame
> > > + */
> > > +static u32 rpmb_process_request(struct optee *optee, struct rpmb_dev *rdev,
> > > +                             void *req, size_t req_size,
> > > +                             void *rsp, size_t rsp_size)
> > > +{
> > > +     struct rpmb_req *sreq = req;
> > > +     int rc;
> > > +
> > > +     if (req_size < sizeof(*sreq))
> > > +             return TEEC_ERROR_BAD_PARAMETERS;
> > > +
> > > +     switch (sreq->cmd) {
> > > +     case RPMB_CMD_DATA_REQ:
> > > +             rc = rpmb_route_frames(rdev, RPMB_REQ_DATA(req),
> > > +                                    req_size - sizeof(struct rpmb_req),
> > > +                                    rsp, rsp_size);
> > > +             if (rc)
> > > +                     return TEEC_ERROR_BAD_PARAMETERS;
> > > +             return TEEC_SUCCESS;
> > > +     case RPMB_CMD_GET_DEV_INFO:
> > > +             return get_dev_info(rdev, rsp, rsp_size);
> > > +     default:
> > > +             return TEEC_ERROR_BAD_PARAMETERS;
> > > +     }
> > > +}
> > > +
> > > +static void handle_rpc_func_rpmb(struct tee_context *ctx, struct optee *optee,
> > > +                              struct optee_msg_arg *arg)
> > > +{
> > > +     struct tee_param params[2];
> > > +     struct rpmb_dev *rdev;
> > > +     void *p0, *p1;
> > > +
> > > +     mutex_lock(&optee->rpmb_dev_mutex);
> > > +     rdev = rpmb_dev_get(optee->rpmb_dev);
> > > +     mutex_unlock(&optee->rpmb_dev_mutex);
> > > +     if (!rdev) {
> >         mutex_lock(&optee->rpmb_dev_mutex);
> >         rdev = rpmb_dev_find_device(NULL, optee->rpmb_dev, rpc_rpmb_match);
> >         rpmb_dev_put(optee->rpmb_dev);
> >         optee->rpmb_dev = rdev;
> >         mutex_unlock(&optee->rpmb_dev_mutex);
> >
> >         if (!rdev) {
> >             handle_rpc_supp_cmd(ctx, optee, arg);
> >             return;
> >         }
> > > + }
> >
> > In optee_os core/pta/device.c:invoke_cmd():
> >
> >     case PTA_CMD_GET_DEVICES_RPMB:
> > -           res = tee_rpmb_init();
> > +           res = tee_rpmb_reinit();
> >
> > With tee_rpmb_reinit implemented like this:
> >
> > TEE_Result tee_rpmb_reinit(void)
> > {
> >     TEE_Result res = rpmb_probe_reset();
> >     if (res) {
> >         if (res != TEE_ERROR_NOT_SUPPORTED)
> >             return res;
> >         return legacy_rpmb_init();
> >     }
> >     return tee_rpmb_init();
> > }
> 
> OP-TEE in the secure world could save the CID and reinitialize by
> searching for that specific device.
> 
> Thanks,
> Jens
> 
> >
> > > +     if (arg->num_params != ARRAY_SIZE(params) ||
> > > +         optee->ops->from_msg_param(optee, params, arg->num_params,
> > > +                                    arg->params) ||
> > > +         params[0].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT ||
> > > +         params[1].attr != TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT) {
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +             goto out;
> > > +     }
> > > +
> > > +     p0 = tee_shm_get_va(params[0].u.memref.shm,
> > > +                         params[0].u.memref.shm_offs);
> > > +     p1 = tee_shm_get_va(params[1].u.memref.shm,
> > > +                         params[1].u.memref.shm_offs);
> > > +     arg->ret = rpmb_process_request(optee, rdev, p0,
> > > +                                     params[0].u.memref.size,
> > > +                                     p1, params[1].u.memref.size);
> > > +     if (arg->ret)
> > > +             goto out;
> > > +
> > > +     if (optee->ops->to_msg_param(optee, arg->params,
> > > +                                  arg->num_params, params))
> > > +             arg->ret = TEEC_ERROR_BAD_PARAMETERS;
> > > +out:
> > > +     rpmb_dev_put(rdev);
> > > +}
> > > +
> > >  void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
> > >                  struct optee_msg_arg *arg)
> > >  {
> > > @@ -271,6 +494,15 @@ void optee_rpc_cmd(struct tee_context *ctx, struct optee *optee,
> > >       case OPTEE_RPC_CMD_I2C_TRANSFER:
> > >               handle_rpc_func_cmd_i2c_transfer(ctx, arg);
> > >               break;
> > > +     case OPTEE_RPC_CMD_RPMB_PROBE_RESET:
> > > +             handle_rpc_func_rpmb_probe_reset(ctx, optee, arg);
> > > +             break;
> > > +     case OPTEE_RPC_CMD_RPMB_PROBE_NEXT:
> > > +             handle_rpc_func_rpmb_probe_next(ctx, optee, arg);
> > > +             break;
> > > +     case OPTEE_RPC_CMD_RPMB:
> > > +             handle_rpc_func_rpmb(ctx, optee, arg);
> > > +             break;
> > >       default:
> > >               handle_rpc_supp_cmd(ctx, optee, arg);
> > >       }
> > > diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
> > > index a37f87087e5c..c23bcf35c8cb 100644
> > > --- a/drivers/tee/optee/smc_abi.c
> > > +++ b/drivers/tee/optee/smc_abi.c
> > > @@ -20,6 +20,7 @@
> > >  #include <linux/of_irq.h>
> > >  #include <linux/of_platform.h>
> > >  #include <linux/platform_device.h>
> > > +#include <linux/rpmb.h>
> > >  #include <linux/sched.h>
> > >  #include <linux/slab.h>
> > >  #include <linux/string.h>
> > > @@ -1715,6 +1716,7 @@ static int optee_probe(struct platform_device *pdev)
> > >       optee->smc.memremaped_shm = memremaped_shm;
> > >       optee->pool = pool;
> > >       optee_shm_arg_cache_init(optee, arg_cache_flags);
> > > +     mutex_init(&optee->rpmb_dev_mutex);
> > >
> > >       platform_set_drvdata(pdev, optee);
> > >       ctx = teedev_open(optee->teedev);
> > > @@ -1769,6 +1771,9 @@ static int optee_probe(struct platform_device *pdev)
> > >       if (rc)
> > >               goto err_disable_shm_cache;
> > >
> > > +     INIT_WORK(&optee->rpmb_scan_bus_work, optee_bus_scan_rpmb);
> > > +     optee->rpmb_intf.notifier_call = optee_rpmb_intf_rdev;
> > > +     rpmb_interface_register(&optee->rpmb_intf);
> > >       pr_info("initialized driver\n");
> > >       return 0;
> > >
> > > @@ -1782,6 +1787,8 @@ static int optee_probe(struct platform_device *pdev)
> > >  err_close_ctx:
> > >       teedev_close_context(ctx);
> > >  err_supp_uninit:
> > > +     rpmb_dev_put(optee->rpmb_dev);
> > > +     mutex_destroy(&optee->rpmb_dev_mutex);
> > >       optee_shm_arg_cache_uninit(optee);
> > >       optee_supp_uninit(&optee->supp);
> > >       mutex_destroy(&optee->call_queue.mutex);
> > > --
> > > 2.34.1
> > >
>