Received-SPF: pass (google.com: domain of linux-kernel+bounces-168324-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Message-ID: <4d8f4c9b-2efb-4774-9a37-2f257f79b2c9@linux.dev>
Date: Fri, 3 May 2024 17:54:32 -0400
Precedence: bulk
MIME-Version: 1.0
Content-Language: en-US
From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
 Maxime Ripard <mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>,
 David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
 Michal Simek <michal.simek@amd.com>, dri-devel@lists.freedesktop.org,
 linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [BUG] drm: zynqmp_dp: Lockup in zynqmp_dp_bridge_detect when device
 is unbound
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit

Hi,

I have discovered a bug in the displayport driver on drm-misc-next. To
trigger it, run

echo fd4a0000.display > /sys/bus/platform/drivers/zynqmp-dpsub/unbind

The system will become unresponsive and (after a bit) splat with a hard
LOCKUP. One core will be unresponsive at the first zynqmp_dp_read in
zynqmp_dp_bridge_detect.

I believe the issue is due the registers being unmapped and the block
put into reset in zynqmp_dp_remove instead of zynqmp_dpsub_release. This
could be resolved by deferring things until zynqmp_dpsub_release
(requiring us to skip devm_*), or by adding a flag to struct zynqmp_dp
and checking it before each callback. A subsystem-level implementation
might be better for the latter.

For a better traceback, try applying the below patch and running the
following commands before triggering the lockup:

echo 4 > /sys/module/drm/parameters/debug
echo 8 > /proc/sys/kernel/printk

diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 9df068a413f3..17b477b14ab5 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -296,6 +296,7 @@ struct zynqmp_dp_config {
  * @train_set: set of training data
  */
 struct zynqmp_dp {
+       unsigned long long magic;
        struct device *dev;
        struct zynqmp_dpsub *dpsub;
        void __iomem *iomem;
@@ -1533,6 +1534,8 @@ static enum drm_connector_status zynqmp_dp_bridge_detect(struct drm_bridge *brid
        u32 state, i;
        int ret;
 
+       WARN_ON(dp->magic != 0x0123456789abcdefULL);
+
        /*
         * This is from heuristic. It takes some delay (ex, 100 ~ 500 msec) to
         * get the HPD signal with some monitors.
@@ -1723,6 +1726,7 @@ int zynqmp_dp_probe(struct zynqmp_dpsub *dpsub)
        if (!dp)
                return -ENOMEM;
 
+       dp->magic = 0x0123456789abcdefULL;
        dp->dev = &pdev->dev;
        dp->dpsub = dpsub;
        dp->status = connector_status_disconnected;
@@ -1839,4 +1843,5 @@ void zynqmp_dp_remove(struct zynqmp_dpsub *dpsub)
 
        zynqmp_dp_phy_exit(dp);
        zynqmp_dp_reset(dp, true);
+       dp->magic = 0xdeadbeefdeadbeefULL;
 }