Received-SPF: pass (google.com: domain of linux-kernel+bounces-169839-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
Message-ID: <a4099612-a4ae-4211-9674-c7053d2a995a@collabora.com>
Date: Mon, 6 May 2024 14:48:59 +0200
Precedence: bulk
MIME-Version: 1.0
User-Agent: Mozilla Thunderbird
Subject: Re: [RFC v1 5/5] arm64: dts: mediatek: Add mt7986 based Bananapi R3
 Mini
To: Frank Wunderlich <linux@fw-web.de>, Rob Herring <robh@kernel.org>,
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
 Conor Dooley <conor+dt@kernel.org>,
 Michael Turquette <mturquette@baylibre.com>, Stephen Boyd
 <sboyd@kernel.org>, Pavel Machek <pavel@ucw.cz>, Lee Jones <lee@kernel.org>,
 "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>,
 Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
 Matthias Brugger <matthias.bgg@gmail.com>
Cc: Frank Wunderlich <frank-w@public-files.de>,
 Eric Woudstra <ericwouds@gmail.com>, Tianling Shen <cnsztl@immortalwrt.org>,
 devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
 linux-clk@vger.kernel.org, linux-leds@vger.kernel.org,
 netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
 linux-mediatek@lists.infradead.org, Tianling Shen <cnsztl@gmail.com>
References: <20240505164549.65644-1-linux@fw-web.de>
 <20240505164549.65644-6-linux@fw-web.de>
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Content-Language: en-US
In-Reply-To: <20240505164549.65644-6-linux@fw-web.de>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit

Il 05/05/24 18:45, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> Add device Tree for Bananapi R3 Mini SBC.
> 
> Co-developed-by: Eric Woudstra <ericwouds@gmail.com>
> Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
> Co-developed-by: Tianling Shen <cnsztl@gmail.com>
> Signed-off-by: Tianling Shen <cnsztl@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
>   arch/arm64/boot/dts/mediatek/Makefile         |   1 +
>   .../mediatek/mt7986a-bananapi-bpi-r3-mini.dts | 486 ++++++++++++++++++
>   2 files changed, 487 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 37b4ca3a87c9..1763b001ab06 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-mini.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
> new file mode 100644
> index 000000000000..c764b4dc4752
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-mini.dts
> @@ -0,0 +1,486 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2021 MediaTek Inc.
> + * Authors: Frank Wunderlich <frank-w@public-files.de>
> + *          Eric Woudstra <ericwouds@gmail.com>
> + *          Tianling Shen <cnsztl@immortalwrt.org>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/mt65xx.h>
> +
> +#include "mt7986a.dtsi"
> +
> +/ {
> +	model = "Bananapi BPI-R3 Mini";
> +	chassis-type = "embedded";
> +	compatible = "bananapi,bpi-r3mini", "mediatek,mt7986a";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		ethernet0 = &gmac0;
> +		ethernet1 = &gmac1;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	dcin: regulator-12vd {
> +		compatible = "regulator-fixed";
> +		regulator-name = "12vd";
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
> +	fan: pwm-fan {
> +		compatible = "pwm-fan";
> +		#cooling-cells = <2>;
> +		/* cooling level (0, 1, 2) - pwm inverted */
> +		cooling-levels = <255 96 0>;

Did you try to actually invert the PWM?

Look for PWM_POLARITY_INVERTED ;-)

> +		pwms = <&pwm 0 10000>;
> +		status = "okay";
> +	};
> +
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1.8vd";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		vin-supply = <&dcin>;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3.3vd";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		vin-supply = <&dcin>;
> +	};
> +
> +	usb_vbus: regulator-usb-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usb_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpios = <&pio 20 GPIO_ACTIVE_LOW>;
> +		regulator-boot-on;
> +	};
> +
> +	en8811_a: regulator-phy1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "phy1";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pio 16 GPIO_ACTIVE_LOW>;
> +		regulator-always-on;
> +	};
> +
> +	en8811_b: regulator-phy2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "phy2";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pio 17 GPIO_ACTIVE_LOW>;
> +		regulator-always-on;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		green_led: led-0 {
> +			color = <LED_COLOR_ID_GREEN>;
> +			function = LED_FUNCTION_POWER;
> +			gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
> +			default-state = "on";
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		reset-key {
> +			label = "reset";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +};
> +
> +&cpu_thermal {
> +	cooling-maps {
> +		map0 {
> +			/* active: set fan to cooling level 2 */
> +			cooling-device = <&fan 2 2>;
> +			trip = <&cpu_trip_active_high>;
> +		};
> +
> +		map1 {
> +			/* active: set fan to cooling level 1 */
> +			cooling-device = <&fan 1 1>;
> +			trip = <&cpu_trip_active_med>;
> +		};
> +
> +		map2 {
> +			/* active: set fan to cooling level 0 */
> +			cooling-device = <&fan 0 0>;
> +			trip = <&cpu_trip_active_low>;
> +		};
> +	};
> +};
> +
> +&crypto {
> +	status = "okay";
> +};
> +
> +&eth {
> +	status = "okay";
> +
> +	gmac0: mac@0 {
> +		compatible = "mediatek,eth-mac";
> +		reg = <0>;
> +		phy-mode = "2500base-x";
> +		phy-handle = <&phy14>;
> +	};
> +
> +	gmac1: mac@1 {
> +		compatible = "mediatek,eth-mac";
> +		reg = <1>;
> +		phy-mode = "2500base-x";
> +		phy-handle = <&phy15>;
> +	};
> +
> +	mdio: mdio-bus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +};
> +
> +&mmc0 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc0_pins_default>;
> +	pinctrl-1 = <&mmc0_pins_uhs>;
> +	vmmc-supply = <&reg_3p3v>;
> +	vqmmc-supply = <&reg_1p8v>;
> +};
> +
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c_pins>;
> +	status = "okay";
> +
> +	/* MAC Address EEPROM */
> +	eeprom@50 {
> +		compatible = "atmel,24c02";
> +		reg = <0x50>;
> +
> +		address-width = <8>;
> +		pagesize = <8>;
> +		size = <256>;
> +	};
> +};
> +
> +&mdio {

You can just move all this stuff to where you declare the mdio-bus....

> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	phy14: ethernet-phy@14 {

I say that this is `phy0: ethernet-phy@14` - because this is the first PHY on this
board.

> +		reg = <14>;

Uhm.. doesn't this require the ethernet-phy-id03a2.a411 compatible?

> +		interrupts-extended = <&pio 48 IRQ_TYPE_EDGE_FALLING>;
> +		reset-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
> +		reset-assert-us = <10000>;
> +		reset-deassert-us = <20000>;
> +		phy-mode = "2500base-x";
> +		full-duplex;
> +		pause;
> +		airoha,pnswap-rx;
> +
> +		leds {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			led@0 { /* en8811_a_gpio5 */
> +				reg = <0>;
> +				color = <LED_COLOR_ID_YELLOW>;
> +				function = LED_FUNCTION_LAN;
> +				function-enumerator = <1>;

Why aren't you simply using a label?

> +				default-state = "keep";
> +				linux,default-trigger = "netdev";
> +			};
> +			led@1 { /* en8811_a_gpio4 */
> +				reg = <1>;
> +				color = <LED_COLOR_ID_GREEN>;
> +				function = LED_FUNCTION_LAN;
> +				function-enumerator = <2>;
> +				default-state = "keep";
> +				linux,default-trigger = "netdev";
> +			};
> +		};
> +	};
> +
> +	phy15: ethernet-phy@15 {
> +		reg = <15>;

Same here.

Cheers,
Angelo