Received: by 2002:ab2:7b86:0:b0:1f7:5705:b850 with SMTP id q6csp1455685lqh; Mon, 6 May 2024 08:12:55 -0700 (PDT) X-Forwarded-Encrypted: i=3; AJvYcCUJsnVtJib6OMf7uLIkVwV3YO0h6grguR7jpWeKypya9L5HjwPe8vc4mftmZUFeL6lZH1pO11UQjCEZlCSj6lhO0g/+X+EQ7XZ5/v9/dw== X-Google-Smtp-Source: AGHT+IGGCBoDYCpCU0KMIFe4Ue56tww8FCIMZ3iF1mNiXbh3h2e1rO+6iV1fcuQ887EQaQyXmMYU X-Received: by 2002:a50:9b59:0:b0:572:795a:b913 with SMTP id a25-20020a509b59000000b00572795ab913mr9746067edj.34.1715008375032; Mon, 06 May 2024 08:12:55 -0700 (PDT) ARC-Seal: i=2; a=rsa-sha256; t=1715008375; cv=pass; d=google.com; s=arc-20160816; b=gtUNL9tKzpseSl2nPy7OaUMNuUL9bwIuGtjr2bh/spfDrbVWOO0m8Pwr6Q6/a2pkQ2 v6laKLyyPkVBhaO0AH74alXwlJrw964D3LAo78klj57agk66v1Ci/uJ4LHSZDGQJMeHu C8V2+iltxYPMXpUpcB/m/cMjHYEaH23967xTSvt3ml02JrcYjUk8cb890aYsJ9GFY/Oh BFXgqmDJFp+aQiuLTs0IYvgPlpucB8FmwR/RNMBH/ZOFF6i3clWy3TFcuniW14vo8ReE JkO8/ytRMZOhP5ecc1Lvdma8MUyqnPe3uy8M9ht1iQ+3faDDZk1wfu430z7ATLeEnmcj yrug== ARC-Message-Signature: i=2; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=content-transfer-encoding:mime-version:list-unsubscribe :list-subscribe:list-id:precedence:references:in-reply-to:message-id :date:subject:cc:to:from:dkim-signature; bh=jveYpOh+AOdOEg7OOvIQBFqZBYR1dkofH6cXRpl92e8=; fh=Wj77nLC6hlOAsb1H1AZQ+yB5J8vH53oH67JdxycAAGU=; b=wHyRner+hLUm7IS5abnT8ZASncC4s72uN3nMfGQonrdoTB5wZ/5ILmkbY2hWIKtnm4 2WNpOp5h7577KyDwgW3giMVdAn1Xs5uLIriOcbBNZlgY0EsoXMEoQNS+tPxb20ejBeAp lFkLJhC2OhM9aaOdAstlCBT3X0T36gKtuWT6bH2PPJ7sCeqTKz0BDDKK6aC8rJGN56S2 cqDhvQxS6gImdnOgPEMt4K81QvP9BrgbH3TUH5aGnIjvHGHTliZGScd/kVg9raWBAXpU TWNwS+cgpI/lsaIFbMGcK/G8Qyaq9zvtHOAv+Ne5IQFIrN0MbeSchd+UNliiPbU4c5XO yMMA==; dara=google.com ARC-Authentication-Results: i=2; mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=C0aWDSPU; arc=pass (i=1 dkim=pass dkdomain=kernel.org); spf=pass (google.com: domain of linux-kernel+bounces-170057-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) smtp.mailfrom="linux-kernel+bounces-170057-linux.lists.archive=gmail.com@vger.kernel.org"; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from am.mirrors.kernel.org (am.mirrors.kernel.org. [147.75.80.249]) by mx.google.com with ESMTPS id r25-20020aa7c159000000b00572b84f88a5si4721789edp.528.2024.05.06.08.12.54 for (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 06 May 2024 08:12:55 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel+bounces-170057-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=C0aWDSPU; arc=pass (i=1 dkim=pass dkdomain=kernel.org); spf=pass (google.com: domain of linux-kernel+bounces-170057-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) smtp.mailfrom="linux-kernel+bounces-170057-linux.lists.archive=gmail.com@vger.kernel.org"; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: from smtp.subspace.kernel.org (wormhole.subspace.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by am.mirrors.kernel.org (Postfix) with ESMTPS id CEC261F25220 for ; Mon, 6 May 2024 15:12:35 +0000 (UTC) Received: from localhost.localdomain (localhost.localdomain [127.0.0.1]) by smtp.subspace.kernel.org (Postfix) with ESMTP id 59E151586CC; Mon, 6 May 2024 15:10:20 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="C0aWDSPU" Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A0D8C1553B5; Mon, 6 May 2024 15:10:15 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715008215; cv=none; b=eCpdRQTT8eUOzBYHYOda1mzXF/YtT3TLvY+uNJMzp1JZdAQwyE0F6HrRsWZQPuBUs9nWnT7s4X3nKnU7pX9Ta3x0NUxOeJG/PKH/8V2nLZyg/TfEqv6X1wMkugZAAxlYOIUlcIRKeNRWQYnWcKDkhNdPbTdb+0Hpq8GcOQmyKFY= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1715008215; c=relaxed/simple; bh=IqN85Bl78UCzls1ZfaO48JRo5epr0gUY+Set+TiTF8A=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=OoyEur9/A7kTtFXtF/PONWdBAjwNLChOFB3f5/VQahmgA8q1aTdncLUqBrP2vOuodRy2Xw4iFGQM9jr8Ujoq75qSx3tkahzc1PH6MfppqLHqThlzIE3PmN85NCtp4OXBMvOmT+gup73K2j7hBBeR46zfhSy/m2gqkWshCTpXHTw= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=C0aWDSPU; arc=none smtp.client-ip=10.30.226.201 Received: by smtp.kernel.org (Postfix) with ESMTPSA id 1FE5EC4DE16; Mon, 6 May 2024 15:10:15 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1715008215; bh=IqN85Bl78UCzls1ZfaO48JRo5epr0gUY+Set+TiTF8A=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=C0aWDSPUkZim8kQ4VN+PAqAVqCdCFbyyorfBpkwmzkwXPrmKrDbdwSJzcHex7mnyG S499acB15z6WDY2unRXYX2z59ZaKKUCbl8H+Lo0V8hx0R9bnYdBvGb3Zo6WjsJtKZY 2FqNssm1S+d0aIp8SPv3EQjX4r33mDOxPa4zRR9Vr9dPJ1dDbB1CD/IQ9LxtoumsiV egC0FLgeZPX7ahZddbZpvcfWh+7vfcNJjpQ92MGQjfMGNUi5DhRHTtoPzVOukIsnT4 OQTRoc8V9A2hmMT/AaWnn+35gV1VxGKtV6zJqDmutIvBY/l9FL+XFag4eiG8EyZOVq lh8PYArFDDcHA== Received: from johan by xi.lan with local (Exim 4.97.1) (envelope-from ) id 1s3zyq-000000006Cd-3U7A; Mon, 06 May 2024 17:10:16 +0200 From: Johan Hovold To: Lee Jones , Mark Brown , Linus Walleij , Bjorn Andersson Cc: Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Liam Girdwood , Das Srinagesh , Satya Priya , Stephen Boyd , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, Johan Hovold Subject: [PATCH 12/13] regulator: add pm8008 pmic regulator driver Date: Mon, 6 May 2024 17:08:29 +0200 Message-ID: <20240506150830.23709-13-johan+linaro@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240506150830.23709-1-johan+linaro@kernel.org> References: <20240506150830.23709-1-johan+linaro@kernel.org> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit From: Satya Priya Qualcomm Technologies, Inc. PM8008 is an I2C-controlled PMIC containing seven LDO regulators. Add a PM8008 regulator driver to support PMIC regulator management via the regulator framework. Note that this driver, originally submitted by Satya Priya [1], has been reworked to match the new devicetree binding which no longer describes each regulator as a separate device. This avoids describing internal details like register offsets in the devicetree and allows for extending the implementation with features like over-current protection without having to update the binding. Specifically note that the regulator interrupts are shared between all regulators. Note that the secondary regmap is looked up by name and that if the driver ever needs to be generalised to support regulators provided by the primary regmap (I2C address) such information could be added to a driver lookup table matching on the parent compatible. This also fixes the original implementation, which looked up regulators by 'regulator-name' property rather than devicetree node name and which prevented the regulators from being named to match board schematics. [1] https://lore.kernel.org/r/1655200111-18357-8-git-send-email-quic_c_skakit@quicinc.com Signed-off-by: Satya Priya Cc: Stephen Boyd [ johan: rework probe to match new binding, amend commit message and Kconfig entry] Signed-off-by: Johan Hovold --- drivers/regulator/Kconfig | 7 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom-pm8008-regulator.c | 215 ++++++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 drivers/regulator/qcom-pm8008-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 7db0a29b5b8d..d07d034ef1a2 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1027,6 +1027,13 @@ config REGULATOR_PWM This driver supports PWM controlled voltage regulators. PWM duty cycle can increase or decrease the voltage. +config REGULATOR_QCOM_PM8008 + tristate "Qualcomm Technologies, Inc. PM8008 PMIC regulators" + depends on MFD_QCOM_PM8008 + help + Select this option to enable support for the voltage regulators in + Qualcomm Technologies, Inc. PM8008 PMICs. + config REGULATOR_QCOM_REFGEN tristate "Qualcomm REFGEN regulator driver" depends on ARCH_QCOM || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 46fb569e6be8..0457b0925b3e 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -112,6 +112,7 @@ obj-$(CONFIG_REGULATOR_MT6380) += mt6380-regulator.o obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o +obj-$(CONFIG_REGULATOR_QCOM_PM8008) += qcom-pm8008-regulator.o obj-$(CONFIG_REGULATOR_QCOM_REFGEN) += qcom-refgen-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o diff --git a/drivers/regulator/qcom-pm8008-regulator.c b/drivers/regulator/qcom-pm8008-regulator.c new file mode 100644 index 000000000000..51f1ce5e043c --- /dev/null +++ b/drivers/regulator/qcom-pm8008-regulator.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define VSET_STEP_MV 8 +#define VSET_STEP_UV (VSET_STEP_MV * 1000) + +#define LDO_ENABLE_REG(base) ((base) + 0x46) +#define ENABLE_BIT BIT(7) + +#define LDO_VSET_LB_REG(base) ((base) + 0x40) + +#define LDO_STEPPER_CTL_REG(base) ((base) + 0x3b) +#define DEFAULT_VOLTAGE_STEPPER_RATE 38400 +#define STEP_RATE_MASK GENMASK(1, 0) + +#define NLDO_MIN_UV 528000 +#define NLDO_MAX_UV 1504000 + +#define PLDO_MIN_UV 1504000 +#define PLDO_MAX_UV 3400000 + +struct pm8008_regulator_data { + const char *name; + const char *supply_name; + u16 base; + int min_dropout_uv; + const struct linear_range *voltage_range; +}; + +struct pm8008_regulator { + struct regmap *regmap; + struct regulator_desc rdesc; + u16 base; + int step_rate; +}; + +static const struct linear_range nldo_ranges[] = { + REGULATOR_LINEAR_RANGE(528000, 0, 122, 8000), +}; + +static const struct linear_range pldo_ranges[] = { + REGULATOR_LINEAR_RANGE(1504000, 0, 237, 8000), +}; + +static const struct pm8008_regulator_data reg_data[] = { + /* name parent base headroom_uv voltage_range */ + { "ldo1", "vdd_l1_l2", 0x4000, 225000, nldo_ranges, }, + { "ldo2", "vdd_l1_l2", 0x4100, 225000, nldo_ranges, }, + { "ldo3", "vdd_l3_l4", 0x4200, 300000, pldo_ranges, }, + { "ldo4", "vdd_l3_l4", 0x4300, 300000, pldo_ranges, }, + { "ldo5", "vdd_l5", 0x4400, 200000, pldo_ranges, }, + { "ldo6", "vdd_l6", 0x4500, 200000, pldo_ranges, }, + { "ldo7", "vdd_l7", 0x4600, 200000, pldo_ranges, }, +}; + +static int pm8008_regulator_get_voltage(struct regulator_dev *rdev) +{ + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev); + __le16 mV; + int uV; + + regmap_bulk_read(pm8008_reg->regmap, + LDO_VSET_LB_REG(pm8008_reg->base), (void *)&mV, 2); + + uV = le16_to_cpu(mV) * 1000; + return (uV - pm8008_reg->rdesc.min_uV) / pm8008_reg->rdesc.uV_step; +} + +static inline int pm8008_write_voltage(struct pm8008_regulator *pm8008_reg, + int mV) +{ + __le16 vset_raw; + + vset_raw = cpu_to_le16(mV); + + return regmap_bulk_write(pm8008_reg->regmap, + LDO_VSET_LB_REG(pm8008_reg->base), + (const void *)&vset_raw, sizeof(vset_raw)); +} + +static int pm8008_regulator_set_voltage_time(struct regulator_dev *rdev, + int old_uV, int new_uv) +{ + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev); + + return DIV_ROUND_UP(abs(new_uv - old_uV), pm8008_reg->step_rate); +} + +static int pm8008_regulator_set_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + struct pm8008_regulator *pm8008_reg = rdev_get_drvdata(rdev); + int rc, mV; + + rc = regulator_list_voltage_linear_range(rdev, selector); + if (rc < 0) + return rc; + + /* voltage control register is set with voltage in millivolts */ + mV = DIV_ROUND_UP(rc, 1000); + + rc = pm8008_write_voltage(pm8008_reg, mV); + if (rc < 0) + return rc; + + return 0; +} + +static const struct regulator_ops pm8008_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_voltage_sel = pm8008_regulator_set_voltage, + .get_voltage_sel = pm8008_regulator_get_voltage, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_time = pm8008_regulator_set_voltage_time, +}; + +static int pm8008_regulator_probe(struct platform_device *pdev) +{ + struct regulator_config reg_config = {}; + struct pm8008_regulator *pm8008_reg; + struct device *dev = &pdev->dev; + struct regulator_desc *rdesc; + struct regulator_dev *rdev; + struct regmap *regmap; + unsigned int val; + int rc, i; + + regmap = dev_get_regmap(dev->parent, "secondary"); + if (!regmap) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(reg_data); i++) { + pm8008_reg = devm_kzalloc(dev, sizeof(*pm8008_reg), GFP_KERNEL); + if (!pm8008_reg) + return -ENOMEM; + + pm8008_reg->regmap = regmap; + pm8008_reg->base = reg_data[i].base; + + /* get slew rate */ + rc = regmap_bulk_read(pm8008_reg->regmap, + LDO_STEPPER_CTL_REG(pm8008_reg->base), &val, 1); + if (rc < 0) { + dev_err(dev, "failed to read step rate: %d\n", rc); + return rc; + } + val &= STEP_RATE_MASK; + pm8008_reg->step_rate = DEFAULT_VOLTAGE_STEPPER_RATE >> val; + + rdesc = &pm8008_reg->rdesc; + rdesc->type = REGULATOR_VOLTAGE; + rdesc->ops = &pm8008_regulator_ops; + rdesc->name = reg_data[i].name; + rdesc->supply_name = reg_data[i].supply_name; + rdesc->of_match = reg_data[i].name; + rdesc->uV_step = VSET_STEP_UV; + rdesc->linear_ranges = reg_data[i].voltage_range; + rdesc->n_linear_ranges = 1; + BUILD_BUG_ON((ARRAY_SIZE(pldo_ranges) != 1) || + (ARRAY_SIZE(nldo_ranges) != 1)); + + if (reg_data[i].voltage_range == nldo_ranges) { + rdesc->min_uV = NLDO_MIN_UV; + rdesc->n_voltages = ((NLDO_MAX_UV - NLDO_MIN_UV) / rdesc->uV_step) + 1; + } else { + rdesc->min_uV = PLDO_MIN_UV; + rdesc->n_voltages = ((PLDO_MAX_UV - PLDO_MIN_UV) / rdesc->uV_step) + 1; + } + + rdesc->enable_reg = LDO_ENABLE_REG(pm8008_reg->base); + rdesc->enable_mask = ENABLE_BIT; + rdesc->min_dropout_uV = reg_data[i].min_dropout_uv; + rdesc->regulators_node = of_match_ptr("regulators"); + + reg_config.dev = dev->parent; + reg_config.driver_data = pm8008_reg; + reg_config.regmap = pm8008_reg->regmap; + + rdev = devm_regulator_register(dev, rdesc, ®_config); + if (IS_ERR(rdev)) { + rc = PTR_ERR(rdev); + dev_err(dev, "failed to register regulator %s: %d\n", + reg_data[i].name, rc); + return rc; + } + } + + return 0; +} + +static struct platform_driver pm8008_regulator_driver = { + .driver = { + .name = "qcom-pm8008-regulator", + }, + .probe = pm8008_regulator_probe, +}; + +module_platform_driver(pm8008_regulator_driver); + +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. PM8008 PMIC Regulator Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:qcom-pm8008-regulator"); -- 2.43.2