Received-SPF: pass (google.com: domain of linux-kernel+bounces-173606-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: jdelvare@suse.com,
	linux@roeck-us.net,
	robh@kernel.org,
	krzk+dt@kernel.org,
	conor+dt@kernel.org
Cc: linux-hwmon@vger.kernel.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH 2/2] hwmon: (adt7475) Add support for configuring initial PWM duty cycle
Date: Thu,  9 May 2024 05:05:43 +1200
Message-ID: <20240508170544.263059-3-chris.packham@alliedtelesis.co.nz>
In-Reply-To: <20240508170544.263059-1-chris.packham@alliedtelesis.co.nz>
References: <20240508170544.263059-1-chris.packham@alliedtelesis.co.nz>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable

By default the PWM duty cycle in hardware is 100%. On some systems this
can cause unwanted fan noise. Add the ability to take an initial PWM
duty cycle and frequency via device properties.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
 drivers/hwmon/adt7475.c | 56 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
index 4224ffb30483..b0c7c1a95897 100644
--- a/drivers/hwmon/adt7475.c
+++ b/drivers/hwmon/adt7475.c
@@ -1662,6 +1662,54 @@ static int adt7475_set_pwm_polarity(struct i2c_cli=
ent *client)
 	return 0;
 }
=20
+static int adt7475_set_pwm_initial_freq(struct i2c_client *client)
+{
+	int ret, out, i;
+	u32 freqs[ADT7475_PWM_COUNT];
+	int data;
+
+	ret =3D device_property_read_u32_array(&client->dev,
+					     "pwm-initial-frequency", freqs,
+					     ARRAY_SIZE(freqs));
+	if (ret)
+		return ret;
+
+	for (i =3D 0; i < ADT7475_PWM_COUNT; i++) {
+		out =3D find_closest(freqs[i], pwmfreq_table, ARRAY_SIZE(pwmfreq_table=
));
+		data =3D adt7475_read(TEMP_TRANGE_REG(i));
+		if (data < 0)
+			return data;
+		data &=3D ~0xf;
+		data |=3D out;
+
+		ret =3D i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(i), data);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int adt7475_set_pwm_initial_duty(struct i2c_client *client)
+{
+	int ret, i;
+	u32 dutys[ADT7475_PWM_COUNT];
+
+	ret =3D device_property_read_u32_array(&client->dev,
+					     "adi,pwm-initial-duty-cycle", dutys,
+					     ARRAY_SIZE(dutys));
+	if (ret)
+		return ret;
+
+	for (i =3D 0; i < ADT7475_PWM_COUNT; i++) {
+		ret =3D i2c_smbus_write_byte_data(client, PWM_MAX_REG(i), dutys[i] & 0=
xff);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int adt7475_probe(struct i2c_client *client)
 {
 	enum chips chip;
@@ -1778,6 +1826,14 @@ static int adt7475_probe(struct i2c_client *client=
)
 	if (ret && ret !=3D -EINVAL)
 		dev_warn(&client->dev, "Error configuring pwm polarity\n");
=20
+	ret =3D adt7475_set_pwm_initial_freq(client);
+	if (ret)
+		return ret;
+
+	ret =3D adt7475_set_pwm_initial_duty(client);
+	if (ret)
+		return ret;
+
 	/* Start monitoring */
 	switch (chip) {
 	case adt7475:
--=20
2.43.2