Received-SPF: pass (google.com: domain of linux-kernel+bounces-175514-linux.lists.archive=gmail.com@vger.kernel.org designates 139.178.88.99 as permitted sender) client-ip=139.178.88.99;
From: Dmitry Rokosov <ddrokosov@salutedevices.com>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>, <khilman@baylibre.com>,
	<martin.blumenstingl@googlemail.com>
CC: <kernel@salutedevices.com>, <rockosov@gmail.com>,
	<linux-amlogic@lists.infradead.org>, <linux-clk@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>, Dmitry Rokosov
	<ddrokosov@salutedevices.com>
Subject: [PATCH v2 4/4] arm64: dts: amlogic: a1: setup CPU power management
Date: Fri, 10 May 2024 12:12:26 +0300
Message-ID: <20240510091251.20086-5-ddrokosov@salutedevices.com>
In-Reply-To: <20240510091251.20086-1-ddrokosov@salutedevices.com>
References: <20240510091251.20086-1-ddrokosov@salutedevices.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

The Amlogic A1 SoC family utilizes static operating points and a
PWM-controlled core voltage regulator, which is specific to the board.
As the main CPU clock input, the SoC uses CLKID_CPU_CLK from the CPU
clock controller, which can be inherited from the system PLL (syspll) or
a fixed CPU clock.

Currently, the stable operating points at all frequencies are set to
800mV. This value is obtained from the vendor setup of several A1
boards.

Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 44 +++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 785778f3a7da..fa13dd6ed03d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -33,6 +33,13 @@ cpu0: cpu@0 {
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&clkc_cpu CLKID_CPU_CLK>;
+			clock-names = "core_clk";
+			operating-points-v2 = <&cpu_opp_table0>;
+			voltage-tolerance = <0>;
+			clock-latency = <50000>;
+			capacity-dmips-mhz = <400>;
+			dynamic-power-coefficient = <80>;
 			#cooling-cells = <2>;
 		};
 
@@ -42,6 +49,13 @@ cpu1: cpu@1 {
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&clkc_cpu CLKID_CPU_CLK>;
+			clock-names = "core_clk";
+			operating-points-v2 = <&cpu_opp_table0>;
+			voltage-tolerance = <0>;
+			clock-latency = <50000>;
+			capacity-dmips-mhz = <400>;
+			dynamic-power-coefficient = <80>;
 			#cooling-cells = <2>;
 		};
 
@@ -52,6 +66,36 @@ l2: l2-cache0 {
 		};
 	};
 
+	cpu_opp_table0: cpu_opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <128000000>;
+			opp-microvolt = <800000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <256000000>;
+			opp-microvolt = <800000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <512000000>;
+			opp-microvolt = <800000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-microvolt = <800000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <800000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	efuse: efuse {
 		compatible = "amlogic,meson-gxbb-efuse";
 		clocks = <&clkc_periphs CLKID_OTP>;
-- 
2.43.0