Received-SPF: pass (google.com: domain of linux-kernel+bounces-176630-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Feedback-ID: ifd894703:Fastmail
From: Jiaxun Yang <jiaxun.yang@flygoat.com>
Date: Sat, 11 May 2024 17:00:13 +0100
Subject: [PATCH 6/7] clocksource: mips-gic-timer: Refine rating computation
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240511-mips-clks-v1-6-ddb4a10ee9f9@flygoat.com>
References: <20240511-mips-clks-v1-0-ddb4a10ee9f9@flygoat.com>
In-Reply-To: <20240511-mips-clks-v1-0-ddb4a10ee9f9@flygoat.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>, 
 Serge Semin <fancer.lancer@gmail.com>, 
 Daniel Lezcano <daniel.lezcano@linaro.org>, 
 Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org, 
 Jiaxun Yang <jiaxun.yang@flygoat.com>

It is a good clocksource which usually go as fast as CPU core
and have a low access latency, so raise the base of rating
from Good to desired when we know that it has a stable frequency.

Increase frequency addend dividend to 100000000 (10MHz) to
reasonably accommodate multi GHz level clock, also cap rating
within current level.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 drivers/clocksource/mips-gic-timer.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/mips-gic-timer.c b/drivers/clocksource/mips-gic-timer.c
index b3ae38f36720..67498dc9c5a5 100644
--- a/drivers/clocksource/mips-gic-timer.c
+++ b/drivers/clocksource/mips-gic-timer.c
@@ -197,7 +197,11 @@ static int __init __gic_clocksource_init(void)
 	gic_clocksource.mask = CLOCKSOURCE_MASK(count_width);
 
 	/* Calculate a somewhat reasonable rating value. */
-	gic_clocksource.rating = 200 + gic_frequency / 10000000;
+	if (mips_cm_revision() >= CM_REV_CM3 || !IS_ENABLED(CONFIG_CPU_FREQ))
+		gic_clocksource.rating = 300; /* Good when frequecy is stable */
+	else
+		gic_clocksource.rating = 200;
+	gic_clocksource.rating += clamp(gic_frequency / 100000000, 0, 99);
 
 	ret = clocksource_register_hz(&gic_clocksource, gic_frequency);
 	if (ret < 0)

-- 
2.34.1