Received-SPF: pass (google.com: domain of linux-kernel+bounces-178857-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
Date: Tue, 14 May 2024 15:28:39 +0000
From: Manuel Traut <manut@mecka.net>
To: Jens Wiklander <jens.wiklander@linaro.org>
Cc: linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org,
	op-tee@lists.trustedfirmware.org,
	Shyam Saini <shyamsaini@linux.microsoft.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Jerome Forissier <jerome.forissier@linaro.org>,
	Sumit Garg <sumit.garg@linaro.org>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Bart Van Assche <bvanassche@acm.org>,
	Randy Dunlap <rdunlap@infradead.org>,
	Ard Biesheuvel <ardb@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Tomas Winkler <tomas.winkler@intel.com>,
	Alex =?iso-8859-15?Q?Benn=E9e?= <alex.bennee@linaro.org>
Subject: Re: [PATCH v6 1/3] rpmb: add Replay Protected Memory Block (RPMB)
 subsystem
Message-ID: <ZkODJ2ZEejh8HyaO@mecka.net>
References: <20240507091619.2208810-1-jens.wiklander@linaro.org>
 <20240507091619.2208810-2-jens.wiklander@linaro.org>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20240507091619.2208810-2-jens.wiklander@linaro.org>

On Tue, May 07, 2024 at 11:16:17AM +0200, Jens Wiklander wrote:
> A number of storage technologies support a specialised hardware
> partition designed to be resistant to replay attacks. The underlying
> HW protocols differ but the operations are common. The RPMB partition
> cannot be accessed via standard block layer, but by a set of specific
> RPMB commands. Such a partition provides authenticated and replay
> protected access, hence suitable as a secure storage.
> 
> The initial aim of this patch is to provide a simple RPMB driver
> interface which can be accessed by the optee driver to facilitate early
> RPMB access to OP-TEE OS (secure OS) during the boot time.
> 
> A TEE device driver can claim the RPMB interface, for example, via
> rpmb_interface_register() or rpmb_dev_find_device(). The RPMB driver
> provides a callback to route RPMB frames to the RPMB device accessible
> via rpmb_route_frames().
> 
> The detailed operation of implementing the access is left to the TEE
> device driver itself.
> 
> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>
> Signed-off-by: Shyam Saini <shyamsaini@linux.microsoft.com>
> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Manuel Traut <manut@mecka.net>

> ---
>  MAINTAINERS              |   7 ++
>  drivers/misc/Kconfig     |  10 ++
>  drivers/misc/Makefile    |   1 +
>  drivers/misc/rpmb-core.c | 233 +++++++++++++++++++++++++++++++++++++++
>  include/linux/rpmb.h     | 136 +++++++++++++++++++++++
>  5 files changed, 387 insertions(+)
>  create mode 100644 drivers/misc/rpmb-core.c
>  create mode 100644 include/linux/rpmb.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8999497011a2..e83152c42499 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19012,6 +19012,13 @@ T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-de2-rotate.yaml
>  F:	drivers/media/platform/sunxi/sun8i-rotate/
>  
> +RPMB SUBSYSTEM
> +M:	Jens Wiklander <jens.wiklander@linaro.org>
> +L:	linux-kernel@vger.kernel.org
> +S:	Supported
> +F:	drivers/misc/rpmb-core.c
> +F:	include/linux/rpmb.h
> +
>  RPMSG TTY DRIVER
>  M:	Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
>  L:	linux-remoteproc@vger.kernel.org
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 4fb291f0bf7c..dbff9e8c3a03 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -104,6 +104,16 @@ config PHANTOM
>  	  If you choose to build module, its name will be phantom. If unsure,
>  	  say N here.
>  
> +config RPMB
> +	tristate "RPMB partition interface"
> +	depends on MMC
> +	help
> +	  Unified RPMB unit interface for RPMB capable devices such as eMMC and
> +	  UFS. Provides interface for in-kernel security controllers to access
> +	  RPMB unit.
> +
> +	  If unsure, select N.
> +
>  config TIFM_CORE
>  	tristate "TI Flash Media interface support"
>  	depends on PCI
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index ea6ea5bbbc9c..8af058ad1df4 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_LKDTM)		+= lkdtm/
>  obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
>  obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
>  obj-$(CONFIG_PHANTOM)		+= phantom.o
> +obj-$(CONFIG_RPMB)		+= rpmb-core.o
>  obj-$(CONFIG_QCOM_COINCELL)	+= qcom-coincell.o
>  obj-$(CONFIG_QCOM_FASTRPC)	+= fastrpc.o
>  obj-$(CONFIG_SENSORS_BH1770)	+= bh1770glc.o
> diff --git a/drivers/misc/rpmb-core.c b/drivers/misc/rpmb-core.c
> new file mode 100644
> index 000000000000..e42a45debc76
> --- /dev/null
> +++ b/drivers/misc/rpmb-core.c
> @@ -0,0 +1,233 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright(c) 2015 - 2019 Intel Corporation. All rights reserved.
> + * Copyright(c) 2021 - 2024 Linaro Ltd.
> + */
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/rpmb.h>
> +#include <linux/slab.h>
> +
> +static struct list_head rpmb_dev_list;
> +static DEFINE_MUTEX(rpmb_mutex);
> +static struct blocking_notifier_head rpmb_interface =
> +	BLOCKING_NOTIFIER_INIT(rpmb_interface);
> +
> +/**
> + * rpmb_dev_get() - increase rpmb device ref counter
> + * @rdev: rpmb device
> + */
> +struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev)
> +{
> +	if (rdev)
> +		get_device(rdev->parent_dev);
> +	return rdev;
> +}
> +EXPORT_SYMBOL_GPL(rpmb_dev_get);
> +
> +/**
> + * rpmb_dev_put() - decrease rpmb device ref counter
> + * @rdev: rpmb device
> + */
> +void rpmb_dev_put(struct rpmb_dev *rdev)
> +{
> +	if (rdev)
> +		put_device(rdev->parent_dev);
> +}
> +EXPORT_SYMBOL_GPL(rpmb_dev_put);
> +
> +/**
> + * rpmb_route_frames() - route rpmb frames to rpmb device
> + * @rdev:	rpmb device
> + * @req:	rpmb request frames
> + * @req_len:	length of rpmb request frames in bytes
> + * @rsp:	rpmb response frames
> + * @rsp_len:	length of rpmb response frames in bytes
> + *
> + * Returns: < 0 on failure
> + */
> +int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
> +		      unsigned int req_len, u8 *rsp, unsigned int rsp_len)
> +{
> +	if (!req || !req_len || !rsp || !rsp_len)
> +		return -EINVAL;
> +
> +	return rdev->descr.route_frames(rdev->parent_dev, req, req_len,
> +					rsp, rsp_len);
> +}
> +EXPORT_SYMBOL_GPL(rpmb_route_frames);
> +
> +/**
> + * rpmb_dev_find_device() - return first matching rpmb device
> + * @data: data for the match function
> + * @match: the matching function
> + *
> + * Iterate over registered RPMB devices, and call @match() for each passing
> + * it the RPMB device and @data.
> + *
> + * The return value of @match() is checked for each call. If it returns
> + * anything other 0, break and return the found RPMB device.
> + *
> + * It's the callers responsibility to call rpmb_dev_put() on the returned
> + * device, when it's done with it.
> + *
> + * Returns: a matching rpmb device or NULL on failure
> + */
> +struct rpmb_dev *rpmb_dev_find_device(const void *data,
> +				      const struct rpmb_dev *start,
> +				      int (*match)(struct rpmb_dev *rdev,
> +						   const void *data))
> +{
> +	struct rpmb_dev *rdev;
> +	struct list_head *pos;
> +
> +	mutex_lock(&rpmb_mutex);
> +	if (start)
> +		pos = start->list_node.next;
> +	else
> +		pos = rpmb_dev_list.next;
> +
> +	while (pos != &rpmb_dev_list) {
> +		rdev = container_of(pos, struct rpmb_dev, list_node);
> +		if (match(rdev, data)) {
> +			rpmb_dev_get(rdev);
> +			goto out;
> +		}
> +		pos = pos->next;
> +	}
> +	rdev = NULL;
> +
> +out:
> +	mutex_unlock(&rpmb_mutex);
> +
> +	return rdev;
> +}
> +EXPORT_SYMBOL_GPL(rpmb_dev_find_device);
> +
> +/**
> + * rpmb_dev_unregister() - unregister RPMB partition from the RPMB subsystem
> + * @rdev: the rpmb device to unregister
> + *
> + * This function should be called from the release function of the
> + * underlying device used when the RPMB device was registered.
> + *
> + * Returns: < 0 on failure
> + */
> +int rpmb_dev_unregister(struct rpmb_dev *rdev)
> +{
> +	if (!rdev)
> +		return -EINVAL;
> +
> +	mutex_lock(&rpmb_mutex);
> +	list_del(&rdev->list_node);
> +	mutex_unlock(&rpmb_mutex);
> +	kfree(rdev->descr.dev_id);
> +	kfree(rdev);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(rpmb_dev_unregister);
> +
> +/**
> + * rpmb_dev_register - register RPMB partition with the RPMB subsystem
> + * @dev: storage device of the rpmb device
> + * @ops: device specific operations
> + *
> + * While registering the RPMB partition extract needed device information
> + * while needed resources are available.
> + *
> + * Returns: a pointer to a 'struct rpmb_dev' or an ERR_PTR on failure
> + */
> +struct rpmb_dev *rpmb_dev_register(struct device *dev,
> +				   struct rpmb_descr *descr)
> +{
> +	struct rpmb_dev *rdev;
> +
> +	if (!dev || !descr || !descr->route_frames || !descr->dev_id ||
> +	    !descr->dev_id_len)
> +		return ERR_PTR(-EINVAL);
> +
> +	rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
> +	if (!rdev)
> +		return ERR_PTR(-ENOMEM);
> +	rdev->descr = *descr;
> +	rdev->descr.dev_id = kmemdup(descr->dev_id, descr->dev_id_len,
> +				     GFP_KERNEL);
> +	if (!rdev->descr.dev_id) {
> +		kfree(rdev);
> +		return ERR_PTR(-ENOMEM);
> +	}
> +
> +	rdev->parent_dev = dev;
> +
> +	dev_dbg(rdev->parent_dev, "registered device\n");
> +
> +	mutex_lock(&rpmb_mutex);
> +	list_add_tail(&rdev->list_node, &rpmb_dev_list);
> +	blocking_notifier_call_chain(&rpmb_interface, RPMB_NOTIFY_ADD_DEVICE,
> +				     rdev);
> +	mutex_unlock(&rpmb_mutex);
> +
> +	return rdev;
> +}
> +EXPORT_SYMBOL_GPL(rpmb_dev_register);
> +
> +/**
> + * rpmb_interface_register() - register for new device notifications
> + *
> + * @nb : New entry in notifier chain
> + *
> + * Returns: 0 on success  -EEXIST on error.
> + */
> +int rpmb_interface_register(struct notifier_block *nb)
> +{
> +	struct rpmb_dev *rdev;
> +	int ret;
> +
> +	ret = blocking_notifier_chain_register(&rpmb_interface, nb);
> +	if (ret)
> +		return ret;
> +
> +	mutex_lock(&rpmb_mutex);
> +	list_for_each_entry(rdev, &rpmb_dev_list, list_node)
> +		nb->notifier_call(nb, RPMB_NOTIFY_ADD_DEVICE, rdev);
> +	mutex_unlock(&rpmb_mutex);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(rpmb_interface_register);
> +
> +/**
> + * rpmb_interface_unregister() - unregister from new device notifications
> + *
> + * @nb : Entry to remove from notifier chain
> + *
> + * Returns: 0 on success or -ENOENT on failure.
> + */
> +int rpmb_interface_unregister(struct notifier_block *nb)
> +{
> +	return blocking_notifier_chain_unregister(&rpmb_interface, nb);
> +}
> +EXPORT_SYMBOL_GPL(rpmb_interface_unregister);
> +
> +static int __init rpmb_init(void)
> +{
> +	INIT_LIST_HEAD(&rpmb_dev_list);
> +	return 0;
> +}
> +
> +static void __exit rpmb_exit(void)
> +{
> +	mutex_destroy(&rpmb_mutex);
> +}
> +
> +subsys_initcall(rpmb_init);
> +module_exit(rpmb_exit);
> +
> +MODULE_AUTHOR("Jens Wiklander <jens.wiklander@linaro.org>");
> +MODULE_DESCRIPTION("RPMB class");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/rpmb.h b/include/linux/rpmb.h
> new file mode 100644
> index 000000000000..3ced206fdc17
> --- /dev/null
> +++ b/include/linux/rpmb.h
> @@ -0,0 +1,136 @@
> +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
> +/*
> + * Copyright (C) 2015-2019 Intel Corp. All rights reserved
> + * Copyright (C) 2021-2022 Linaro Ltd
> + */
> +#ifndef __RPMB_H__
> +#define __RPMB_H__
> +
> +#include <linux/types.h>
> +#include <linux/device.h>
> +#include <linux/notifier.h>
> +
> +/**
> + * enum rpmb_type - type of underlying storage technology
> + *
> + * @RPMB_TYPE_EMMC  : emmc (JESD84-B50.1)
> + * @RPMB_TYPE_UFS   : UFS (JESD220)
> + * @RPMB_TYPE_NVME  : NVM Express
> + */
> +enum rpmb_type {
> +	RPMB_TYPE_EMMC,
> +	RPMB_TYPE_UFS,
> +	RPMB_TYPE_NVME,
> +};
> +
> +/**
> + * struct rpmb_descr - RPMB description provided by the underlying block device
> + *
> + * @type             : block device type
> + * @route_frames     : routes frames to and from the RPMB device
> + * @dev_id           : unique device identifier read from the hardware
> + * @dev_id_len       : length of unique device identifier
> + * @reliable_wr_count: number of sectors that can be written in one access
> + * @capacity         : capacity of the device in units of 128K
> + *
> + * @dev_id is intended to be used as input when deriving the authenticaion key.
> + */
> +struct rpmb_descr {
> +	enum rpmb_type type;
> +	int (*route_frames)(struct device *dev, u8 *req, unsigned int req_len,
> +			    u8 *resp, unsigned int resp_len);
> +	u8 *dev_id;
> +	size_t dev_id_len;
> +	u16 reliable_wr_count;
> +	u16 capacity;
> +};
> +
> +/**
> + * struct rpmb_dev - device which can support RPMB partition
> + *
> + * @parent_dev       : parent device
> + * @list_node        : linked list node
> + * @descr            : RPMB description
> + */
> +struct rpmb_dev {
> +	struct device *parent_dev;
> +	struct list_head list_node;
> +	struct rpmb_descr descr;
> +};
> +
> +enum rpmb_interface_action {
> +	RPMB_NOTIFY_ADD_DEVICE,
> +};
> +
> +/**
> + * struct rpmb_interface - subscribe to new RPMB devices
> + *
> + * @list_node     : linked list node
> + * @add_rdev      : notifies that a new RPMB device has been found
> + */
> +struct rpmb_interface {
> +	struct list_head list_node;
> +	void (*add_rdev)(struct rpmb_interface *intf, struct rpmb_dev *rdev);
> +};
> +
> +#if IS_ENABLED(CONFIG_RPMB)
> +struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev);
> +void rpmb_dev_put(struct rpmb_dev *rdev);
> +struct rpmb_dev *rpmb_dev_find_device(const void *data,
> +				      const struct rpmb_dev *start,
> +				      int (*match)(struct rpmb_dev *rdev,
> +						   const void *data));
> +struct rpmb_dev *rpmb_dev_register(struct device *dev,
> +				   struct rpmb_descr *descr);
> +int rpmb_dev_unregister(struct rpmb_dev *rdev);
> +
> +int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
> +		      unsigned int req_len, u8 *resp, unsigned int resp_len);
> +
> +int rpmb_interface_register(struct notifier_block *nb);
> +int rpmb_interface_unregister(struct notifier_block *nb);
> +#else
> +static inline struct rpmb_dev *rpmb_dev_get(struct rpmb_dev *rdev)
> +{
> +	return NULL;
> +}
> +
> +static inline void rpmb_dev_put(struct rpmb_dev *rdev) { }
> +
> +static inline struct rpmb_dev *
> +rpmb_dev_find_device(const void *data, const struct rpmb_dev *start,
> +		     int (*match)(struct rpmb_dev *rdev, const void *data))
> +{
> +	return NULL;
> +}
> +
> +static inline struct rpmb_dev *
> +rpmb_dev_register(struct device *dev, const struct rpmb_ops *ops)
> +{
> +	return NULL;
> +}
> +
> +static inline int rpmb_dev_unregister(struct rpmb_dev *dev)
> +{
> +	return 0;
> +}
> +
> +static inline int rpmb_route_frames(struct rpmb_dev *rdev, u8 *req,
> +				    unsigned int req_len, u8 *resp,
> +				    unsigned int resp_len)
> +{
> +	return -EOPNOTSUPP;
> +}
> +
> +static inline int rpmb_interface_register(struct notifier_block *nb)
> +{
> +	return -EOPNOTSUPP;
> +}
> +
> +static inline int rpmb_interface_unregister(struct notifier_block *nb)
> +{
> +	return -EOPNOTSUPP;
> +}
> +#endif /* CONFIG_RPMB */
> +
> +#endif /* __RPMB_H__ */
> -- 
> 2.34.1
>