Received-SPF: pass (google.com: domain of linux-kernel+bounces-180657-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.80.249 as permitted sender) client-ip=147.75.80.249;
IronPort-SDR: 66459157_q9iazH+mDcRK3NR82ZTOlb0K7FRW+hm7URsjiS8t1nyIKgn
 rZB6pcOf7rwJ0DstwLL0ocp66ckr+ILE6YtHpNQ==
WDCIronportException: Internal
From: Avri Altman <avri.altman@wdc.com>
To: "Martin K . Petersen" <martin.petersen@oracle.com>
Cc: Bart Van Assche <bvanassche@acm.org>,
	Bean Huo <beanhuo@micron.com>,
	Peter Wang <peter.wang@mediatek.com>,
	linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Avri Altman <avri.altman@wdc.com>
Subject: [PATCH v4 1/3] scsi: ufs: Allow RTT negotiation
Date: Thu, 16 May 2024 08:51:22 +0300
Message-ID: <20240516055124.24490-2-avri.altman@wdc.com>
In-Reply-To: <20240516055124.24490-1-avri.altman@wdc.com>
References: <20240516055124.24490-1-avri.altman@wdc.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

The rtt-upiu packets precede any data-out upiu packets, thus
synchronizing the data input to the device: this mostly applies to write
operations, but there are other operations that requires rtt as well.

There are several rules binding this rtt - data-out dialog, specifically
There can be at most outstanding bMaxNumOfRTT such packets.  This might
have an effect on write performance (sequential write in particular), as
each data-out upiu must wait for its rtt sibling.

UFSHCI expects bMaxNumOfRTT to be min(bDeviceRTTCap, NORTT). However,
as of today, there does not appears to be no-one who sets it: not the
host controller nor the driver.  It wasn't an issue up to now:
bMaxNumOfRTT is set to 2 after manufacturing, and wasn't limiting the
write performance.

UFS4.0, and specifically gear 5 changes this, and requires the device to
be more attentive.  This doesn't come free - the device has to allocate
more resources to that end, but the sequential write performance
improvement is significant. Early measurements shows 25% gain when
moving from rtt 2 to 9. Therefore, set bMaxNumOfRTT to be
min(bDeviceRTTCap, NORTT) as UFSHCI expects.

Signed-off-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
---
 drivers/ufs/core/ufshcd.c | 36 ++++++++++++++++++++++++++++++++++++
 include/ufs/ufshcd.h      |  2 ++
 include/ufs/ufshci.h      |  1 +
 3 files changed, 39 insertions(+)

diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c
index 0819ddafe7a6..c472bfdf071e 100644
--- a/drivers/ufs/core/ufshcd.c
+++ b/drivers/ufs/core/ufshcd.c
@@ -102,6 +102,9 @@
 /* Default RTC update every 10 seconds */
 #define UFS_RTC_UPDATE_INTERVAL_MS (10 * MSEC_PER_SEC)
 
+/* bMaxNumOfRTT is equal to two after device manufacturing */
+#define DEFAULT_MAX_NUM_RTT 2
+
 /* UFSHC 4.0 compliant HC support this mode. */
 static bool use_mcq_mode = true;
 
@@ -2405,6 +2408,8 @@ static inline int ufshcd_hba_capabilities(struct ufs_hba *hba)
 	((hba->capabilities & MASK_TASK_MANAGEMENT_REQUEST_SLOTS) >> 16) + 1;
 	hba->reserved_slot = hba->nutrs - 1;
 
+	hba->nortt = FIELD_GET(MASK_NUMBER_OUTSTANDING_RTT, hba->capabilities) + 1;
+
 	/* Read crypto capabilities */
 	err = ufshcd_hba_init_crypto_capabilities(hba);
 	if (err) {
@@ -8119,6 +8124,35 @@ static void ufshcd_ext_iid_probe(struct ufs_hba *hba, u8 *desc_buf)
 	dev_info->b_ext_iid_en = ext_iid_en;
 }
 
+static void ufshcd_rtt_set(struct ufs_hba *hba, u8 *desc_buf)
+{
+	struct ufs_dev_info *dev_info = &hba->dev_info;
+	u32 rtt = 0;
+	u32 dev_rtt = 0;
+
+	/* RTT override makes sense only for UFS-4.0 and above */
+	if (dev_info->wspecversion < 0x400)
+		return;
+
+	if (ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
+				    QUERY_ATTR_IDN_MAX_NUM_OF_RTT, 0, 0, &dev_rtt)) {
+		dev_err(hba->dev, "failed reading bMaxNumOfRTT\n");
+		return;
+	}
+
+	/* do not override if it was already written */
+	if (dev_rtt != DEFAULT_MAX_NUM_RTT)
+		return;
+
+	rtt = min_t(int, desc_buf[DEVICE_DESC_PARAM_RTT_CAP], hba->nortt);
+	if (rtt == dev_rtt)
+		return;
+
+	if (ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
+				    QUERY_ATTR_IDN_MAX_NUM_OF_RTT, 0, 0, &rtt))
+		dev_err(hba->dev, "failed writing bMaxNumOfRTT\n");
+}
+
 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
 			     const struct ufs_dev_quirk *fixups)
 {
@@ -8278,6 +8312,8 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
 	if (hba->ext_iid_sup)
 		ufshcd_ext_iid_probe(hba, desc_buf);
 
+	ufshcd_rtt_set(hba, desc_buf);
+
 	/*
 	 * ufshcd_read_string_desc returns size of the string
 	 * reset the error value
diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
index bad88bd91995..d74bd2d67b06 100644
--- a/include/ufs/ufshcd.h
+++ b/include/ufs/ufshcd.h
@@ -819,6 +819,7 @@ enum ufshcd_mcq_opr {
  * @capabilities: UFS Controller Capabilities
  * @mcq_capabilities: UFS Multi Circular Queue capabilities
  * @nutrs: Transfer Request Queue depth supported by controller
+ * @nortt - Max outstanding RTTs supported by controller
  * @nutmrs: Task Management Queue depth supported by controller
  * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
  * @ufs_version: UFS Version to which controller complies
@@ -957,6 +958,7 @@ struct ufs_hba {
 
 	u32 capabilities;
 	int nutrs;
+	int nortt;
 	u32 mcq_capabilities;
 	int nutmrs;
 	u32 reserved_slot;
diff --git a/include/ufs/ufshci.h b/include/ufs/ufshci.h
index 385e1c6b8d60..c50f92bf2e1d 100644
--- a/include/ufs/ufshci.h
+++ b/include/ufs/ufshci.h
@@ -68,6 +68,7 @@ enum {
 /* Controller capability masks */
 enum {
 	MASK_TRANSFER_REQUESTS_SLOTS		= 0x0000001F,
+	MASK_NUMBER_OUTSTANDING_RTT		= 0x0000FF00,
 	MASK_TASK_MANAGEMENT_REQUEST_SLOTS	= 0x00070000,
 	MASK_EHSLUTRD_SUPPORTED			= 0x00400000,
 	MASK_AUTO_HIBERN8_SUPPORT		= 0x00800000,
-- 
2.34.1