Received-SPF: pass (google.com: domain of linux-kernel+bounces-181575-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Frank Wunderlich <linux@fw-web.de>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Frank Wunderlich <frank-w@public-files.de>,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org,
	Daniel Golle <daniel@makrotopia.org>,
	=?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
Subject: [PATCH] arm64: dts: mt7622: fix switch probe on bananapi-r64
Date: Thu, 16 May 2024 22:48:47 +0200
Message-Id: <20240516204847.171029-1-linux@fw-web.de>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

From: Frank Wunderlich <frank-w@public-files.de>

After commit 868ff5f4944a
("net: dsa: mt7530-mdio: read PHY address of switch from device tree")
the mt7531 switch on Bananapi-R64 was not detected.

mt7530-mdio mdio-bus:00: reset timeout
mt7530-mdio mdio-bus:00: probe with driver mt7530-mdio failed with error -110

Fix this by adding phy address in devicetree.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 224bb289660c..811b227d6f50 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -149,9 +149,9 @@ mdio: mdio-bus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@0 {
+		switch@1f {
 			compatible = "mediatek,mt7531";
-			reg = <0>;
+			reg = <0x1f>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			interrupts-extended = <&pio 53 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.34.1