Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964849AbYAaXiv (ORCPT ); Thu, 31 Jan 2008 18:38:51 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754345AbYAaXin (ORCPT ); Thu, 31 Jan 2008 18:38:43 -0500 Received: from outbound.icp-qv1-irony-out3.iinet.net.au ([203.59.1.148]:64069 "EHLO outbound.icp-qv1-irony-out3.iinet.net.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754581AbYAaXik (ORCPT ); Thu, 31 Jan 2008 18:38:40 -0500 X-Greylist: delayed 606 seconds by postgrey-1.27 at vger.kernel.org; Thu, 31 Jan 2008 18:38:37 EST X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: Ao8CAMbooUd8qNBs/2dsb2JhbACrCQ X-IronPort-AV: E=Sophos;i="4.25,287,1199631600"; d="scan'208?fc7'208";a="220407072" Message-ID: <47A25998.1000501@eyal.emu.id.au> Date: Fri, 01 Feb 2008 10:28:24 +1100 From: Eyal Lebedinsky Organization: Eyal at Home User-Agent: Thunderbird 2.0.0.9 (X11/20071115) MIME-Version: 1.0 To: list linux-kernel Subject: 2.6.23.14 snd_hda_intel problem Content-Type: multipart/mixed; boundary="------------090202070209020708090409" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 53460 Lines: 1105 This is a multi-part message in MIME format. --------------090202070209020708090409 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Running fc7 all was well up until 2.6.23.12-52.fc7. A recent update to 2.6.23.14-64.fc7 lost sound. The boot log now has hda-intel: Error creating card! HDA Intel: probe of 0000:00:1b.0 failed with error -12 Mobo is Intel BLKDG965OTMKR. The device is 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) dmesg attached. TIA -- Eyal Lebedinsky (eyal@eyal.emu.id.au) --------------090202070209020708090409 Content-Type: text/plain; name="dmesg.2.6.23.12-52.fc7" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.2.6.23.12-52.fc7" Linux version 2.6.23.12-52.fc7 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Tue Dec 18 20:27:10 EST 2007 Command line: ro root=LABEL=/ rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007edb6000 (usable) BIOS-e820: 000000007edb6000 - 000000007edc3000 (reserved) BIOS-e820: 000000007edc3000 - 000000007ee47000 (usable) BIOS-e820: 000000007ee47000 - 000000007eeac000 (ACPI NVS) BIOS-e820: 000000007eeac000 - 000000007eeaf000 (ACPI data) BIOS-e820: 000000007eeaf000 - 000000007eef2000 (ACPI NVS) BIOS-e820: 000000007eef2000 - 000000007eeff000 (ACPI data) BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable) BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 519606) 1 entries of 3200 used Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7EEFD038, 004C (r1 INTEL DG965OT 330 1000013) ACPI: FACP 7EEFC000, 0074 (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: DSDT 7EEF8000, 3EDA (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: FACS 7EEAF000, 0040 ACPI: APIC 7EEF7000, 0078 (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: WDDT 7EEF6000, 0040 (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: MCFG 7EEF5000, 003C (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: ASF! 7EEF4000, 00A6 (r32 INTEL DG965OT 330 MSFT 1000013) ACPI: SSDT 7EEF3000, 01BC (r1 INTEL CpuPm 330 MSFT 1000013) ACPI: SSDT 7EEF2000, 0175 (r1 INTEL Cpu0Ist 330 MSFT 1000013) ACPI: SSDT 7EEAE000, 0175 (r1 INTEL Cpu1Ist 330 MSFT 1000013) ACPI: SSDT 7EEAD000, 0175 (r1 INTEL Cpu2Ist 330 MSFT 1000013) ACPI: SSDT 7EEAC000, 0175 (r1 INTEL Cpu3Ist 330 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000007ef00000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 519606) 1 entries of 3200 used Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007ef00000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 519606 0: 519619 -> 519751 0: 519935 -> 519936 On node 0 totalpages: 519642 DMA zone: 56 pages used for memmap DMA zone: 1307 pages reserved DMA zone: 2636 pages, LIFO batch:0 DMA32 zone: 7052 pages used for memmap DMA32 zone: 508591 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 000000007edb6000 - 000000007edc3000 swsusp: Registered nosave memory region: 000000007ee47000 - 000000007eeac000 swsusp: Registered nosave memory region: 000000007eeac000 - 000000007eeaf000 swsusp: Registered nosave memory region: 000000007eeaf000 - 000000007eef2000 swsusp: Registered nosave memory region: 000000007eef2000 - 000000007eeff000 Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 41176 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 511227 Policy zone: DMA32 Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2131.220 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2041240k/2079744k available (2417k kernel code, 37328k reserved, 1369k data, 324k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Calibrating delay using timer specific routine.. 4264.20 BogoMIPS (lpj=2132103) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16650146 Detected 16.650 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4261.83 BogoMIPS (lpj=2130919) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2080 bytes Time: 22:09:37 Date: 01/31/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Failed to allocate mem resource #6:20000@a0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: a0000000-a1ffffff PREFETCH window: 80000000-9fffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: a2300000-a23fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: a2100000-a21fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: a2400000-a24fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: a2500000-a25fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: a2600000-a26fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: a2000000-a20fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3068k freed audit: initializing netlink socket (disabled) audit(1201817376.445:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 7C3D39AAD2D29BC5 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Magic number: 8:250:200 Freeing unused kernel memory: 324k freed Write protecting the kernel read-only data: 1012k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020a0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: ImPS/2 Generic Wheel Mouse as /class/input/input2 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usb 3-2: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xa2225400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected usb 3-2: configuration #1 chosen from 1 choice input: Logitech Logitech USB Headset as /class/input/input3 input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa2225000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x0000000000012138 ctl 0x000000000001214e bmdma 0x0000000000012110 irq 19 ata2: SATA max UDMA/133 cmd 0x0000000000012130 ctl 0x000000000001214a bmdma 0x0000000000012118 irq 19 ata1.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7 ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x0000000000012128 ctl 0x0000000000012146 bmdma 0x00000000000120f0 irq 19 ata4: SATA max UDMA/133 cmd 0x0000000000012120 ctl 0x0000000000012142 bmdma 0x00000000000120f8 irq 19 usb 7-3: new high speed USB device using ehci_hcd and address 3 usb 7-3: configuration #1 chosen from 1 choice hub 7-3:1.0: USB hub found hub 7-3:1.0: 2 ports detected usb 3-2: USB disconnect, address 2 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Logitech Logitech USB Headset as /class/input/input4 input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2 usb 7-3.1: new high speed USB device using ehci_hcd and address 5 usb 7-3.1: configuration #1 chosen from 1 choice hub 7-3.1:1.0: USB hub found hub 7-3.1:1.0: 4 ports detected usb 7-3.2: new high speed USB device using ehci_hcd and address 6 usb 7-3.2: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice input: Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps as /class/input/input5 input: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:1d.1-2 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 scsi4 : pata_marvell scsi5 : pata_marvell ata5: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 17 ata6: DUMMY BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.00, max UDMA/66 ata5.00: configured for UDMA/66 scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22N 1.00 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1201817384.527:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1835 types, 87 bools, 1 sens, 1024 cats security: 61 classes, 69985 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1201817384.811:3): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21 Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning input: PC Speaker as /class/input/input6 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] nvidia: module license 'NVIDIA' taints kernel. input: Power Button (FF) as /class/input/input7 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input8 ACPI: Sleep Button (CM) [SLPB] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.07 Thu Dec 13 18:34:01 PST 2007 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:b6:bc:b6 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 usbcore: registered new interface driver snd-usb-audio firewire_core: created new fw device fw0 (0 config rom retries, S400) SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions usb-storage: device scan complete scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0 scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0 scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:1: [sdc] Attached SCSI removable disk sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:2: [sdd] Attached SCSI removable disk sd 6:0:0:2: Attached scsi generic sg4 type 0 sd 6:0:0:3: [sde] Attached SCSI removable disk sd 6:0:0:3: Attached scsi generic sg5 type 0 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts --------------090202070209020708090409 Content-Type: text/plain; name="dmesg.2.6.23.14-64.fc7" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.2.6.23.14-64.fc7" Linux version 2.6.23.14-64.fc7 (mockbuild@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-27)) #1 SMP Sun Jan 20 22:20:19 EST 2008 Command line: ro root=LABEL=/ rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007edb6000 (usable) BIOS-e820: 000000007edb6000 - 000000007edc3000 (reserved) BIOS-e820: 000000007edc3000 - 000000007ee47000 (usable) BIOS-e820: 000000007ee47000 - 000000007eeac000 (ACPI NVS) BIOS-e820: 000000007eeac000 - 000000007eeaf000 (ACPI data) BIOS-e820: 000000007eeaf000 - 000000007eef2000 (ACPI NVS) BIOS-e820: 000000007eef2000 - 000000007eeff000 (ACPI data) BIOS-e820: 000000007eeff000 - 000000007ef00000 (usable) BIOS-e820: 000000007ef00000 - 000000007f000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 519606) 1 entries of 3200 used Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT 7EEFD038, 004C (r1 INTEL DG965OT 330 1000013) ACPI: FACP 7EEFC000, 0074 (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: DSDT 7EEF8000, 3EDA (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: FACS 7EEAF000, 0040 ACPI: APIC 7EEF7000, 0078 (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: WDDT 7EEF6000, 0040 (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: MCFG 7EEF5000, 003C (r1 INTEL DG965OT 330 MSFT 1000013) ACPI: ASF! 7EEF4000, 00A6 (r32 INTEL DG965OT 330 MSFT 1000013) ACPI: SSDT 7EEF3000, 01BC (r1 INTEL CpuPm 330 MSFT 1000013) ACPI: SSDT 7EEF2000, 0175 (r1 INTEL Cpu0Ist 330 MSFT 1000013) ACPI: SSDT 7EEAE000, 0175 (r1 INTEL Cpu1Ist 330 MSFT 1000013) ACPI: SSDT 7EEAD000, 0175 (r1 INTEL Cpu2Ist 330 MSFT 1000013) ACPI: SSDT 7EEAC000, 0175 (r1 INTEL Cpu3Ist 330 MSFT 1000013) No NUMA configuration found Faking a node at 0000000000000000-000000007ef00000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 519606) 1 entries of 3200 used Entering add_active_range(0, 519619, 519751) 2 entries of 3200 used Entering add_active_range(0, 519935, 519936) 3 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007ef00000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 519606 0: 519619 -> 519751 0: 519935 -> 519936 On node 0 totalpages: 519642 DMA zone: 56 pages used for memmap DMA zone: 1307 pages reserved DMA zone: 2636 pages, LIFO batch:0 DMA32 zone: 7052 pages used for memmap DMA32 zone: 508591 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 swsusp: Registered nosave memory region: 000000007edb6000 - 000000007edc3000 swsusp: Registered nosave memory region: 000000007ee47000 - 000000007eeac000 swsusp: Registered nosave memory region: 000000007eeac000 - 000000007eeaf000 swsusp: Registered nosave memory region: 000000007eeaf000 - 000000007eef2000 swsusp: Registered nosave memory region: 000000007eef2000 - 000000007eeff000 Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000) SMP: Allowing 4 CPUs, 2 hotplug CPUs PERCPU: Allocating 41176 bytes of per cpu data Built 1 zonelists in Node order. Total pages: 511227 Policy zone: DMA32 Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2131.261 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 2041244k/2079744k available (2418k kernel code, 37324k reserved, 1368k data, 324k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 Calibrating delay using timer specific routine.. 4264.19 BogoMIPS (lpj=2132097) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16650471 Detected 16.650 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4432.26 BogoMIPS (lpj=2216132) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2080 bytes Time: 9:43:15 Date: 01/31/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Failed to allocate mem resource #6:20000@a0000000 for 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: a0000000-a1ffffff PREFETCH window: 80000000-9fffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: a2300000-a23fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: a2100000-a21fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: a2400000-a24fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: a2500000-a25fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: a2600000-a26fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: a2000000-a20fffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 6291456 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3066k freed audit: initializing netlink socket (disabled) audit(1201772595.441:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 4E0C9E3E2FB53A6F - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:01:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Magic number: 8:934:728 Freeing unused kernel memory: 324k freed Write protecting the kernel read-only data: 1012k USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020a0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: ImPS/2 Generic Wheel Mouse as /class/input/input2 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver usb 3-2: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xa2225400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected usb 3-2: configuration #1 chosen from 1 choice input: Logitech Logitech USB Headset as /class/input/input3 input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xa2225000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected SCSI subsystem initialized libata version 2.21 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x0000000000012138 ctl 0x000000000001214e bmdma 0x0000000000012110 irq 19 ata2: SATA max UDMA/133 cmd 0x0000000000012130 ctl 0x000000000001214a bmdma 0x0000000000012118 irq 19 ata1.00: ATA-7: SAMSUNG HD400LJ, ZZ100-15, max UDMA7 ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD400LJ ZZ10 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x0000000000012128 ctl 0x0000000000012146 bmdma 0x00000000000120f0 irq 19 ata4: SATA max UDMA/133 cmd 0x0000000000012120 ctl 0x0000000000012142 bmdma 0x00000000000120f8 irq 19 usb 7-3: new high speed USB device using ehci_hcd and address 3 usb 7-3: configuration #1 chosen from 1 choice hub 7-3:1.0: USB hub found hub 7-3:1.0: 2 ports detected usb 3-2: USB disconnect, address 2 usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Logitech Logitech USB Headset as /class/input/input4 input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2 usb 7-3.1: new high speed USB device using ehci_hcd and address 5 usb 7-3.1: configuration #1 chosen from 1 choice hub 7-3.1:1.0: USB hub found hub 7-3.1:1.0: 4 ports detected usb 7-3.2: new high speed USB device using ehci_hcd and address 6 usb 7-3.2: configuration #1 chosen from 1 choice usb 4-2: new low speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice input: Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps as /class/input/input5 input: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:1d.1-2 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 scsi4 : pata_marvell scsi5 : pata_marvell ata5: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 17 ata6: DUMMY BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.00, max UDMA/66 ata5.00: configured for UDMA/66 scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22N 1.00 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. audit(1201772603.509:2): enforcing=1 old_enforcing=0 auid=4294967295 security: 3 users, 6 roles, 1835 types, 87 bools, 1 sens, 1024 cats security: 61 classes, 69985 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1201772603.801:3): policy loaded auid=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 21 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Initializing USB Mass Storage driver... scsi6 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. input: Power Button (FF) as /class/input/input6 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input7 ACPI: Sleep Button (CM) [SLPB] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:b6:bc:b6 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection input: PC Speaker as /class/input/input8 parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:07:03.0[A] -> GSI 19 (level, low) -> IRQ 19 firewire_ohci: Added fw-ohci device 0000:07:03.0, OHCI version 1.10 firewire_core: created new fw device fw0 (0 config rom retries, S400) usbcore: registered new interface driver snd-usb-audio cannot find the slot for index 0 (range 0-0), error: -16 hda-intel: Error creating card! HDA Intel: probe of 0000:00:1b.0 failed with error -12 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.07 Thu Dec 13 18:34:01 PST 2007 SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts usb-storage: device scan complete scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0 scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0 scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0 scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0 sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:1: [sdc] Attached SCSI removable disk sd 6:0:0:1: Attached scsi generic sg3 type 0 sd 6:0:0:2: [sdd] Attached SCSI removable disk sd 6:0:0:2: Attached scsi generic sg4 type 0 sd 6:0:0:3: [sde] Attached SCSI removable disk sd 6:0:0:3: Attached scsi generic sg5 type 0 NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded EXT3 FS on sda1, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts --------------090202070209020708090409-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/