Received-SPF: pass (google.com: domain of linux-kernel+bounces-183054-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.48.161 as permitted sender) client-ip=147.75.48.161;
From: Artur Weber <aweber.kernel@gmail.com>
Date: Sun, 19 May 2024 10:17:48 +0200
Subject: [PATCH v3 2/8] ASoC: dt-bindings: samsung,midas-audio: Add
 GPIO-based headset jack detection
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Message-Id: <20240519-midas-wm1811-gpio-jack-v3-2-0c1736144c0e@gmail.com>
References: <20240519-midas-wm1811-gpio-jack-v3-0-0c1736144c0e@gmail.com>
In-Reply-To: <20240519-midas-wm1811-gpio-jack-v3-0-0c1736144c0e@gmail.com>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>, 
 Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, 
 Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>, 
 Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>, 
 Alim Akhtar <alim.akhtar@samsung.com>, alsa-devel@alsa-project.org, 
 linux-sound@vger.kernel.org, devicetree@vger.kernel.org, 
 linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, 
 linux-samsung-soc@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht, 
 Artur Weber <aweber.kernel@gmail.com>

Some Samsung devices that share the midas-audio driver use a GPIO-based
approach to headset jack detection, as opposed to using the built-in
jack detection provided by the wm8994 driver. This setup uses two GPIOs
(one for jack detection and another for key detection) and an ADC
channel for determining the jack type or button pressed.

Add DT configuration values that allow for describing these setups.

Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
---
Changes in v3:
- Re-added pipe (|) to description of samsung,headset-button-threshold-
  microvolt to prevent syntax error (otherwise the "in order: ..." part
  is interpreted as a list)
Changes in v2:
- Added vendor prefix to threshold properties
- Dropped pipe (|) character from description: field
---
 .../bindings/sound/samsung,midas-audio.yaml        | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
index 6ed53dd0bb53..69ddfd4afdcd 100644
--- a/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,midas-audio.yaml
@@ -64,6 +64,36 @@ properties:
     maxItems: 1
     description: GPIO pin for line out selection
 
+  headset-detect-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset insertion
+
+  headset-key-gpios:
+    maxItems: 1
+    description: GPIO for detection of headset key press
+
+  io-channels:
+    maxItems: 1
+    description: IO channel to read micbias voltage for headset detection
+
+  io-channel-names:
+    const: headset-detect
+
+  samsung,headset-4pole-threshold-microvolt:
+    minItems: 2
+    maxItems: 2
+    description:
+      Array containing minimum and maximum IO channel value for 4-pole
+      (with microphone/button) headsets. If the IO channel value is
+      outside of this range, a 3-pole headset is assumed.
+
+  samsung,headset-button-threshold-microvolt:
+    minItems: 3
+    maxItems: 3
+    description: |
+      Array of minimum (inclusive) IO channel values for headset button
+      detection, in order: "Media", "Volume Up" and "Volume Down".
+
 required:
   - compatible
   - cpu

-- 
2.45.0