Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1765882AbYBAHfl (ORCPT ); Fri, 1 Feb 2008 02:35:41 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1763545AbYBAHfP (ORCPT ); Fri, 1 Feb 2008 02:35:15 -0500 Received: from rex.snapgear.com ([203.143.235.140]:47361 "EHLO snapgear.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1763654AbYBAHfN (ORCPT ); Fri, 1 Feb 2008 02:35:13 -0500 Date: Fri, 1 Feb 2008 17:34:10 +1000 From: Greg Ungerer Message-Id: <200802010734.m117YAx4022578@goober> To: torvalds@linux-foundation.org Subject: [M68KNOMMU]: platform setup for 520x ColdFire parts Cc: gerg@uclinux.org, linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4283 Lines: 148 Switch to platform style configuration for 520x ColdFire parts. Initial support is for the UARTs. DMA support moved to common code for all ColdFire parts. Signed-off-by: Greg Ungerer --- diff -Naurp linux-2.6.24/arch/m68knommu/platform/520x/config.c linux-2.6.24-uc0/arch/m68knommu/platform/520x/config.c --- linux-2.6.24/arch/m68knommu/platform/520x/config.c 2008-01-25 08:58:37.000000000 +1000 +++ linux-2.6.24-uc0/arch/m68knommu/platform/520x/config.c 2007-11-30 11:03:11.000000000 +1000 @@ -5,7 +5,7 @@ * * Copyright (C) 2005, Freescale (www.freescale.com) * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) - * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) */ @@ -13,21 +13,93 @@ #include #include +#include #include +#include #include -#include +#include +#include +#include /***************************************************************************/ -/* - * DMA channel base address table. - */ -unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; -unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; +void coldfire_reset(void); /***************************************************************************/ -void coldfire_reset(void); +static struct mcf_platform_uart m520x_uart_platform[] = { + { + .mapbase = MCF_MBAR + MCFUART_BASE1, + .irq = MCFINT_VECBASE + MCFINT_UART0, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE2, + .irq = MCFINT_VECBASE + MCFINT_UART1, + }, + { + .mapbase = MCF_MBAR + MCFUART_BASE3, + .irq = MCFINT_VECBASE + MCFINT_UART2, + }, + { }, +}; + +static struct platform_device m520x_uart = { + .name = "mcfuart", + .id = 0, + .dev.platform_data = m520x_uart_platform, +}; + +static struct platform_device *m520x_devices[] __initdata = { + &m520x_uart, +}; + +/***************************************************************************/ + +#define INTC0 (MCF_MBAR + MCFICM_INTC0) + +static void __init m520x_uart_init_line(int line, int irq) +{ + u32 imr; + u16 par; + u8 par2; + + writeb(0x03, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line); + + imr = readl(INTC0 + MCFINTC_IMRL); + imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1); + writel(imr, INTC0 + MCFINTC_IMRL); + + switch (line) { + case 0: + par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | + MCF_GPIO_PAR_UART_PAR_URXD0; + writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART); + break; + case 1: + par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | + MCF_GPIO_PAR_UART_PAR_URXD1; + writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART); + break; + case 2: + par2 = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); + par2 &= ~0x0F; + par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | + MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; + writeb(par2, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); + break; + } +} + +static void __init m520x_uarts_init(void) +{ + const int nrlines = ARRAY_SIZE(m520x_uart_platform); + int line; + + for (line = 0; (line < nrlines); line++) + m520x_uart_init_line(line, m520x_uart_platform[line].irq); +} /***************************************************************************/ @@ -42,9 +114,20 @@ void mcf_autovector(unsigned int vec) /***************************************************************************/ -void config_BSP(char *commandp, int size) +void __init config_BSP(char *commandp, int size) { mach_reset = coldfire_reset; + m520x_uarts_init(); +} + +/***************************************************************************/ + +static int __init init_BSP(void) +{ + platform_add_devices(m520x_devices, ARRAY_SIZE(m520x_devices)); + return 0; } +arch_initcall(init_BSP); + /***************************************************************************/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/