Received-SPF: pass (google.com: domain of linux-kernel+bounces-187138-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:45e3:2400::1 as permitted sender) client-ip=2604:1380:45e3:2400::1;
From: Markus Schneider-Pargmann <msp@baylibre.com>
To: Nishanth Menon <nm@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>
Cc: Vibhore Vardhan <vibhore@ti.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Dhruva Gole <d-gole@ti.com>,
	linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Markus Schneider-Pargmann <msp@baylibre.com>
Subject: [PATCH 0/6] firmware: ti_sci: Partial-IO support
Date: Thu, 23 May 2024 10:02:19 +0200
Message-ID: <20240523080225.1288617-1-msp@baylibre.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit

Hi,

Partial-IO is a poweroff SoC state with a few pingroups active for
wakeup. This state can be entered by sending a TI_SCI PREPARE_SLEEP
message.

The message is sent on poweroff if one of the potential wakeup sources
for this power state are wakeup enabled. A list of potential wakeup
sources for the specific SoC is described in the devicetree. The wakeup
sources can be individually enabled/disabled by the user in the running
system.

The series is based on Andrew Davis accepted patches:
  [PATCH 0/4] Unconditionally register TI-SCI reset handler
  https://lore.kernel.org/lkml/20240326223730.54639-1-afd@ti.com/

This series is part of a bigger topic to support Partial-IO on am62,
am62a and am62p. Partial-IO is a poweroff state in which some pins are
able to wakeup the SoC. In detail MCU m_can and two serial port pins can
trigger the wakeup.

These two other series are relevant for the support of Partial-IO:

 - serial: 8250: omap: Add am62 wakeup support
 - can: m_can: Add am62 wakeup support

A test branch is available here that includes all patches required to test
Partial-IO:

https://gitlab.baylibre.com/msp8/linux/-/tree/integration/am62-lp-sk-partialio/v6.9?ref_type=heads

After enabling Wake-on-LAN the system can be powered off and will enter
the Partial-IO state in which it can be woken up by activity on the
specific pins:
    ethtool -s can0 wol p
    ethtool -s can1 wol p
    poweroff

I tested these patches on am62-lp-sk.

Best,
Markus

Markus Schneider-Pargmann (5):
  dt-bindings: ti, sci: Add property for partial-io-wakeup-sources
  firmware: ti_sci: Partial-IO support
  arm64: dts: ti: k3-pinctrl: Add WKUP_EN flag
  arm64: dts: ti: k3-am62: Add partial-io wakeup sources
  arm64: dts: ti: k3-am62a: Add partial-io wakeup sources

Vibhore Vardhan (1):
  arm64: dts: ti: k3-am62p: Add partial-io wakeup sources

 .../bindings/arm/keystone/ti,sci.yaml         |   6 +
 arch/arm64/boot/dts/ti/k3-am62.dtsi           |   4 +
 arch/arm64/boot/dts/ti/k3-am62a.dtsi          |   4 +
 arch/arm64/boot/dts/ti/k3-am62p.dtsi          |   4 +
 arch/arm64/boot/dts/ti/k3-pinctrl.h           |   3 +
 drivers/firmware/ti_sci.c                     | 135 +++++++++++++++++-
 drivers/firmware/ti_sci.h                     |  31 ++++
 7 files changed, 186 insertions(+), 1 deletion(-)

-- 
2.43.0