Received-SPF: pass (google.com: domain of linux-kernel+bounces-187374-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>, <robh@kernel.org>,
        <krzk+dt@kernel.org>, <conor+dt@kernel.org>, <francesco@dolcini.it>
CC: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <danishanwar@ti.com>,
        <srk@ti.com>, <s-vadapalli@ti.com>
Subject: [PATCH v3 0/3] Add PCIe DT support for TI's J784S4 SoC
Date: Thu, 23 May 2024 16:40:05 +0530
Message-ID: <20240523111008.4057988-1-s-vadapalli@ti.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

TI's J784S4 has two x4 Lane and two x2 Lane Gen3 PCIe Controllers.
This series adds the device-tree nodes for all 4 PCIe instances in the
SoC file. The Board (J784S4-EVM) has only PCIe0 and PCIe1 instances of
PCIe brought out, due to which only those PCIe instances are being
enabled in the board file. The device-tree overlay to enable PCIe0 and
PCIe1 in Endpoint mode of operation is also included in this series.

v2:
https://lore.kernel.org/r/20240520101149.3243151-1-s-vadapalli@ti.com/
Changes since v2:
- Rebased on linux-next tagged next-20240523.
- Based on feedback from Francesco Dolcini <francesco@dolcini.it> at:
  https://lore.kernel.org/r/20240521200909.GA3707@francesco-nb/
  the device-tree nodes for PCIe2 and PCIe3 instances of PCIe have been
  added.

v1:
https://lore.kernel.org/r/20240129114749.1197579-1-s-vadapalli@ti.com
Changes since v1:
- Rebased series on linux-next tagged next-20240520.
- All dependencies mentioned in v1 series have been met. This series has
  no further dependencies for functionality.
- Added "pcie0_ctrl" and "pcie1_ctrl" nodes within the System Controller
  node (scm_conf). This enables reusing the existing
  "ti,syscon-pcie-ctrl" property without having to map the entire System
  Controller region for configuring the PCIe specific registers within
  "scm_conf". This change is also done in the "overlay" file in patch
  3/3 w.r.t. providing the phandle to the pcie0_ctrl and pcie1_ctrl
  nodes to the "ti,syscon-pcie-ctrl" property in the overlay.

Logs:
https://gist.github.com/Siddharth-Vadapalli-at-TI/cbf5255b72d7805e86331150a8b2b5c5

Regards,
Siddharth.

Siddharth Vadapalli (3):
  arm64: dts: ti: k3-j784s4-main: Add PCIe nodes
  arm64: dts: ti: k3-j784s4-evm: Enable PCIe0 and PCIe1 in RC Mode
  arm64: dts: ti: k3-j784s4-evm: Add overlay for PCIe0 and PCIe1 EP Mode

 arch/arm64/boot/dts/ti/Makefile               |   7 +-
 .../dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso  |  79 ++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts      |  46 ++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi    | 136 ++++++++++++++++++
 4 files changed, 267 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-pcie0-pcie1-ep.dtso

-- 
2.40.1