Received-SPF: pass (google.com: domain of linux-kernel+bounces-187908-linux.lists.archive=gmail.com@vger.kernel.org designates 147.75.199.223 as permitted sender) client-ip=147.75.199.223;
Date: Thu, 23 May 2024 21:07:24 +0200
From: Francesco Dolcini <francesco@dolcini.it>
To: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jirislaby@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Tony Lindgren <tony@atomide.com>,
	John Ogness <john.ogness@linutronix.de>,
	Uwe =?iso-8859-1?Q?Kleine-K=F6nig?= <u.kleine-koenig@pengutronix.de>,
	Ronald Wahl <ronald.wahl@raritan.com>,
	Thomas Richard <thomas.richard@bootlin.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	Vibhore Vardhan <vibhore@ti.com>,
	Kevin Hilman <khilman@baylibre.com>, Dhruva Gole <d-gole@ti.com>,
	linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH 0/5] serial: 8250: omap: Add am62 wakeup support
Message-ID: <20240523190724.GA31756@francesco-nb>
References: <20240523075819.1285554-1-msp@baylibre.com>
Precedence: bulk
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20240523075819.1285554-1-msp@baylibre.com>

Hello Markus,

On Thu, May 23, 2024 at 09:58:14AM +0200, Markus Schneider-Pargmann wrote:
> Hi,
> 
> to support wakeup from Partial-IO using serial pins of mcu_uart0 and
> wkup_uart0, this series adds a new pinctrl state 'wakeup' in which
> specific wakeup flags are set on these pins. Partial-IO is a poweroff
> state of the SoC in which only a few pingroups are partly powered.
> 
> If the user enabled wakeup from the serial port, the pinctrl state is
> selected on shutdown. For another deep sleep state, which is comparable
> with suspend to memory, the same pinctrl state is selected on suspend as
> well.
> 

..

> 
> After enabling Wake-on-LAN the system can be powered off and will enter
> the Partial-IO state in which it can be woken up by activity on the
> specific pins:
>     ethtool -s can0 wol p
>     ethtool -s can1 wol p
>     poweroff

Confused ... Why the CAN? This is about the UART.

Francesco