Received-SPF: pass (google.com: domain of linux-kernel+bounces-188520-linux.lists.archive=gmail.com@vger.kernel.org designates 2604:1380:4601:e00::3 as permitted sender) client-ip=2604:1380:4601:e00::3;
From: Siddharth Vadapalli <s-vadapalli@ti.com>
To: <nm@ti.com>, <vigneshr@ti.com>, <afd@ti.com>, <kristo@kernel.org>,
        <robh@kernel.org>, <krzk+dt@kernel.org>, <conor+dt@kernel.org>,
        <rogerq@kernel.org>
CC: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>, <u-kumar1@ti.com>,
        <danishanwar@ti.com>, <srk@ti.com>, <s-vadapalli@ti.com>
Subject: [PATCH v3 2/7] arm64: dts: ti: k3-j722s-main: Redefine USB1 node description
Date: Fri, 24 May 2024 14:35:09 +0530
Message-ID: <20240524090514.152727-3-s-vadapalli@ti.com>
In-Reply-To: <20240524090514.152727-1-s-vadapalli@ti.com>
References: <20240524090514.152727-1-s-vadapalli@ti.com>
Precedence: bulk
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain

From: Ravi Gunasekaran <r-gunasekaran@ti.com>

USB1 controller on J722S and AM62P are from different vendors.
Redefine the USB1 node description for J722S by deleting the
node inherited from AM62P dtsi.

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
---
v2:
https://lore.kernel.org/r/20240513114443.16350-3-r-gunasekaran@ti.com/
No changes since v2.

v1:
https://lore.kernel.org/r/20240429120932.11456-3-r-gunasekaran@ti.com/
Changes since v1:
- The entire node which was added in k3-j722s.dtsi in v1 in now moved to
  k3-j722s-main.dtsi as USB is a main domain peripheral.
- Used generic node names - renamed "cdns-usb@f920000" to "usb@f920000".

 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 0dac8f1e1291..b069cecebfd9 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -6,6 +6,13 @@
 
 #include <dt-bindings/phy/phy-ti.h>
 
+/*
+ * USB1 controller on AM62P and J722S are of different IP.
+ * Delete AM62P's USBSS1 node definition and redefine it for J722S.
+ */
+
+/delete-node/ &usbss1;
+
 / {
 	serdes_refclk: clk-0 {
 		compatible = "fixed-clock";
@@ -52,6 +59,38 @@ serdes0: serdes@f000000 {
 			status = "disabled"; /* Needs lane config */
 		};
 	};
+
+	usbss1: usb@f920000 {
+		compatible = "ti,j721e-usb";
+		reg = <0x00 0x0f920000 0x00 0x100>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
+		clock-names = "ref", "lpm";
+		assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
+		assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "disabled";
+
+		usb1: usb@31200000{
+			compatible = "cdns,usb3";
+			reg = <0x00 0x31200000 0x00 0x10000>,
+			      <0x00 0x31210000 0x00 0x10000>,
+			      <0x00 0x31220000 0x00 0x10000>;
+			reg-names = "otg",
+				    "xhci",
+				    "dev";
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+			interrupt-names = "host",
+					  "peripheral",
+					  "otg";
+			maximum-speed = "super-speed";
+			dr_mode = "otg";
+		};
+	};
 };
 
 &main_conf {
-- 
2.40.1